Part Number Hot Search : 
SDA113C CGY121A TEVAL OFMS22MI TLMO3101 11P24 DHR200C5 035PT
Product Description
Full Text Search
 

To Download FLI7540 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 FLI7540
Freeman Ultra -- iDTV SoC Worldwide H.264/MPEG decoder + Faroudja video processing
Data brief
Features

Proven DVB-T/DVB-C demodulator ST231 @ 450 MHz for advanced HD video decoding (H.264/VC-1/MPEG2/...) --> Worldwide DTT broadcast video standards Dual ST231 @ 450 MHz for advanced multichannel audio decoding (MPEG-1/2, MP3, WMA, Dolby(R) Digital/Dolby Digital+, AAC/AAC+/...) --> Worldwide DTT broadcast audio standards Dual ST40 CPU @ 450 MHz (delivers 1700+ DMIPS) runs Linux and OS21 --> One CPU fully dedicated to application and user interface 256 Kbyte level 2 cache --> High performance Internet TV applications Faroudja(R) video processing for Main Video --> Vivid picture quality for the consumer 14-bit Advanced Color Management (3D) and Contrast processing --> Ultimate video quality for OEMs and consumers Award-winning DCDi, MADi technologies --> Crystal-clear rendering on 1080p displays Worldwide analog audio demodulator Picture-in-Picture --> Flexible viewing Two physical graphics planes at up to 1080p/ 32 bpp --> Enables rich, easy-to-use user I/Fs
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 3:1 Mux Phy HDMI Rx w/ HDCP HDMI Audio HDMI Rx w/ HDCP HDMI Audio Y/C + CVBS 20 Analog Video Inputs Analog Video Out VDAC x2 AFE with 20 inputs, 3 outputs, x4 ADC Analog Video Decoder with 3DComb Video Input Select Mux Graphic Engine (Blitter) Macro block to Raster ST-Bus INTERCONNECT FDMA Audio DSP ST231 450 MHz Audio DSP ST231 450 MHz Analog Audio WW Demod Audio: SIF Audio: x11xSIF ADC, x2 2xADC bit, ADC 18 x6 DAC 24 bit EMI NAND Flash Serial Flash L2 Cache Up sampler Video Denc VCR/AUX Scaler
High-performance 3D graphics engine --> Innovative GUI and OpenGL ES 2.0/OpenVG 1.1/Flash 10 applications Extensive analog A/V and digital HDMI (x4) inputs --> End-user convenience for legacy and future content source boxes DVR support on Flash/HDD --> Integration into DTV results in convenience and ease-of-use Extensive connectivity (dual USB host controller + dual PHY, Ethernet MAC) --> Play back content from anywhere (home or Internet) Advanced security with trusted ST40 CPU and DRM support including HDCP, AES/3DES, CI/CI+ and DTCP-IP --> Protects IP & content 48-bit (3 x 16 or 1 x 16 + 1 x 32) DDR2/DDR3 1066 Mbps DRAM I/F --> Performance and flexibility with DRAM ICs PCIe 1.1 bus --> Expansion available for wireless/HDD applications Dual high-speed 10-bit LVDS outputs --> Convenient connectivity to panel TCON Board Support Package (BSP) API accelerates time to market




Applications
Connected, high-performance, and mainstream iDTVs with support for 3DTVs
Display or Video / GFX Compositor LVDS (TTL) Out Double Wide GDP3
PIP Scaler Main Video Processing
ACM 3D and ACC 3 Sharpening Filters 3x3 Matrix Enhancer CLUTs Picture Blend
Gamma Compositor Main GDP 1 & 2 Security System
ST Clock Generator
FDMA
Audio PCM/SPDIF Players/Readers
2D/3D GFX
ST40-300 450 MHz OS21
ST40-300 450 MHz Linux Ethernet Flash 10/100/1G Card I/F MAC USB 2.0 Host Ctrl USB 2.0 PHY
MPEG-2/H.264/ VC1/DiVX/AVS Video Decoder
Transport Stream Demux
Transport Front-End
TS x2 Tuner TS in/out CI/Mcard
DVB-T/C USB 2.0 Host Ctrl USB 2.0 PHY
GP ADC x1
DDR2/3 CTL 16 bit
16
DDR2/3 CTL 32 bit
32
PCIe
UARTs x3 SSC x6 IR Rx (I2C) + SPI
GP I/O PWM x4
S/PDIF
I2S out 7.1ch + 2ch
7x L/R in
1x SIF in
HP 2x out L/R out
DVB-CI, DVB-CI+ MCARD
DDR2/3 DDR2/3 1066 Mbps 1066 Mbps 512 Mb-2 Gb 512 Mb-2 Gb
PCIe x1
MMC/SD
MII/RMII
USB 2.0
USB 2.0
8
August 2010
Doc ID 17804 Rev 1
1/10
www.st.com 10
For further information contact your local STMicroelectronics sales office.
www.DataSheet.in
Description
FLI7540
1
Description
The FLI7540 is a revolutionary new iDTV SoC that integrates two highly successful, marketproven subsystems: STi710x digital/front-end processing and multi-format audio/video decoding from the STB market, and Faroudja video/back-end processing from the TV market. The FLI7540 is a high-performance, state-of-the-art SoC that can power DTT/cable/satellite/IPTV iDTV designs for worldwide deployment. From the software compatibility extending from the mature STi710x STAPI layer to the extensive video processing, tuning, and tools from Faroudja Labs, the FLI7540 is the ideal solution for addressing the next generation of iDTV design requirements. The FLI7540 is the first in a family of scalable in performance and software compatible SoCs that address mainstream and performance segments of the iDTV market. The FLI7540 implements the latest generation of Faroudja Video Optimized technologies, which allow a high degree of customization for TV OEMs. Key technology improvements in this area include 14-bit color and contrast processing, upgraded sharpness, upgraded temporal noise reduction, and new MPEG noise reduction. The FLI7540, with high performance CPU, A/V decode, graphics engine, and extensive network interface capability, enables TVs to deliver rich applications for convenient access to multimedia content, both from within the home, as well as from the web. Along with a high performance, dedicated CPU for customer applications, the FLI7540 is equipped with 256 Kbyte of level 2 cache to deliver the smoothest experience of Internet TV applications. In addition, FLI7540 accelerates 3D graphics with an industry-leading GPU for OpenGL 2.0 and Flash 10 graphics and user interfaces. ST's strong and extensive relationships with popular web and Internet TV service providers give TV OEMs a fast ramp-up to deliver compelling value-add content to the living room.
2/10
Doc ID 17804 Rev 1
www.DataSheet.in
FLI7540
Main features
2
Main features
The FLI7540 is a new, advanced decoding SoC targeted at next generation iDTVs (DTT, as well as with combinations of cable/satellite/IPTV). It integrates in a single IC, proven DVBT+C demodulator, multi-stream transport demux, CPU, multi-format audio/video decode, Faroudja video processing, 3D GPU for graphics and display, advanced security, peripherals, audio/video ADCs/DACs, Digital A/V inputs/outputs, 4x HDMI switch, dual USB controllers and PHYs, Ethernet MAC, and glueless SD/MMC card interface.
2.1
Audio/video decoding
Latest generation "Delta" Video Decoder with ST231 programmable CPU core: - - - - MPEG4-Part 2, RealVideo, MPEG2, H.264, VC-1, HD or SD AVS HD decoding DivX, XviD, H.263 decoding Dual SD Decoding, PIP & Mosaic capable
Advanced de-blocking and de-ringing of decoded H.264/MPEG2/MPEG4P2/RealVideo HD/SD sources based on ST's Digital Source Enhancer (DSE) technology with 2D analysis window and Texture Adaptive Filter Dual ST231 @ 450 MHz for advanced multi-channel audio decoding (MPEG-1/2, MP3, WMA, Dolby Digital/Dolby Digital+, AAC/AAC+). Concurrent audio description decoding. Dolby Digital+ and AAC+ transcoding to Dolby Digital/DTS. In addition, generous headroom remains for OEM post-processing algorithm implementation.
2.2
Graphics and display
Main and PIP video display pipelines: high-quality H & V reformatting/resizing with sample rate conversion/filtering. Motion adaptive spatial and temporal de-interlacing for 480p/576p and 1080p60 progressive output - - - - - 14-bit color/contrast processing 10-bit temporal/space noise reduction DCDi diagonal processing 10-bit Motion Adaptive Deinterlacing (MADi) 10-bit arbitrary scaling, sharpness (linear and non-linear)

Independent Main and PIP display compositions (video/graphics mixing) Pass-through display for graphics, Main video or PIP video output concurrently with Main and PIP compositions (VCRO) Strong 3D GPU for full HD performance of OpenGL ES 2.0, OpenVG 1.1, and Flash 10 applications Two physical graphics planes at up to 1080p/32 bpp resolution for Main display composition, plus a dedicated graphics plane for SD monitor/TV output Link list based 2D and high-performance 3D graphics blitter. Up to 200 Mpixels/sec with destination alpha blending. Capable of 3D user interface effects.
Doc ID 17804 Rev 1
3/10
www.DataSheet.in
Main features

FLI7540 HD display capture and down-conversion for concurrent HD and SD output of the main composition LVDS output of separate Main, and PIP with graphics
2.3
3DTV/3D video
3D video is the ultimate entertainment experience to have at home. Bringing 3D to TV is about supporting the proper connectivity to 3D sources and FLI7540 supports all the connectivity options that are required.

Supports 3D mandatory formats defined in HDMI 1.4a specification Supports Deep Color with mandatory 3D timings up to 12 bpc FLI7540 paired with FLI25xx improves 3D playback by increasing the frame rate per eye, leading to the highest quality 3D TV possible through the following key advantages - - - - - - - - Improved 3D handling with 240 Hz output High-quality 3D video that can be used in conjunction with Faroudja's Motion Corrected Temporal Interpolation (MCTiTM) With FLI25xx's superior 240 Hz processing, the 3D video will be much brighter and have significantly less "ghosting" artifacts Backlight scanning supported for motion blur reduction Improved artifact reduction with separate handling of Main video, and PIP plus graphics Automatic detection of OSD from sources like STB Support for 3D OSD iDP Tx - Simpler and cheaper versus LVDS 3D video formats supported
Output to FLI25xx 720p @ 100/120 Hz (frame sequential) 1080p @ 48 Hz (frame sequential) 1080p @ 50/60 Hz (side-by-side half res) 720p @ 50/60 Hz (top-bottom half res) 1080p @ 50/60 Hz (top-bottom half res)
Table 1.
Input format
720p @ 50/60 Hz (frame packed) 1080p @ 24 Hz (frame packed) 1080i @ 50/60 Hz (side-by-side half res) 720p @ 50/60 Hz (top-bottom half res) 1080p @ 50/60 Hz (top-bottom half res)
2.4
Legacy audio/video interfaces
1+3-inputs of HDMI into two receivers, with HDCP supporting HD and SD video formats up to 1080p60 (222.75 MHz). HDMI receivers are compliant to v1.4a specification and support deep color formats, enhanced colorimetry (xvYCC and gamut metadata reception) and Picture-in-Picture. They also support audio reception in HDMI layout 0 and HDMI layout 1 formats. PAL/NTSC/SECAM analog video decoder PAL/NTSC/SECAM digital video encoder Two 10-bit DACs for S-Video/composite analog video output (SD formats up to 480i/576i)

4/10
Doc ID 17804 Rev 1
www.DataSheet.in
FLI7540

Main features Integrated 6-ch, 24-bit Audio DACs 7.1+2-channel Audio PCM Output Interface SPDIF input and output
2.5
Transport

Dual transport stream inputs (two parallel) Glueless interface to DVB-CI/DVB-CI+/MCARD modules Multi-stream transport stream de-multiplexing, dual-tuner DVR, watch/record capable
2.6
Processors and memory
High-performance dual ST40 CPUs for applications and real-time control - ST40@450 MHz, dual-issue, applications CPU, 32KI, 32KD caches deliver > 800 DMIPs

256 Kbyte level 2 cache for accelerated performance, especially web applications 48-bit (3 x 16 or 1 x 16 + 1 x 32) DDR2/DDR3 Local Memory Interface (LMI), up to 1066 Mbps Supports NAND Flash and Quad Speed Serial Flash Dual multi-channel, flexible DMA controllers
2.7
Connectivity

Dual USB 2.0 host controllers, with two PHY Integrated 10/100/1G Ethernet MAC/MII/RMII, SD/MMC PCIe 1.1 bus available for host bus expansion for wireless/HDD applications
2.8
DVR

DVR supported, with HDD attachment through USB or Flash drive DVB-T+C/3DES/AES/Multi-2/ARC4 descrambling and support for Hash functions
2.9
Security

Advanced security management with secure boot and trusted processor Broadcast stream encryption management (CI/CI+/MCARD) and DVR data reencryption Fully supports DRMs, including HDCP, WMDRM, DTCP-IP RoviTM and Dwight Cavendish copy protection support
Doc ID 17804 Rev 1
5/10
www.DataSheet.in
Main features
FLI7540
2.10
TV SoC peripherals

Three UARTs Six SSCs for I2C/SPI master/slave interfaces (four of them shared with other IO) GPIO banks with alternate functions Infrared receiver Four PWMs HDMI CEC Low bandwidth ADC for chassis control
2.11
Tools
ST provides an extensive array of video and audio quality tuning tools, called "ST Media Tools." These tools not only provide unprecedented access to low-level operation of the audio/video pipelines, but also deliver this flexibility in an easy-to-use fashion.
2.12
Package
FPGBA 35 mm x 35 mm, 956 balls, R34x34, Pitch 1.0 mm, Ball 0.6 mm
6/10
Doc ID 17804 Rev 1
www.DataSheet.in
FLI7540
Application overview
3
Application overview
Figure 1. EU/US DTT + cable iDTV application
DDR2/3
32-bit
FLI25xx
MCTi (MBR+MJR) LED BL Dimming Enhanced Connectivity
DisplayPort
Hybrid Tuner
4x HDMI Inputs Dual YPbPr Multiple CVBS / YC Dual SCART RGB
TS, CVBS
eSATA/ SATA PCIe Bridge 10/100/ 1G MAC RJ45
WiFi/ Bluetooth Module
HDD
Host I/F
2x HS LVDS 10-bit PCIe
FLI7540
ATV / DTV SoC Media Processor Connected TV 2D/3D Graphics
Dual USB Ctrl + 2 PHY I2S / Analog UART Links + LBADC Front panel switches External coms interface (e.g. hotel TVs) Debug / code update
48-bit I/F* SPDIF In SPDIF Out SDIO
NAND DDR2/3
STA33x
Digital Amp
Loudspeaker L/R Out Headphones Out
*3x16-bit or 1x16+1x32-bit configuration options available
Doc ID 17804 Rev 1
7/10
www.DataSheet.in
Ordering information
FLI7540
4
Ordering information
Table 2.
b
Order codes
Part number Description FPBGA 35 x 35 mm
FLI7540
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark.
8/10
Doc ID 17804 Rev 1
www.DataSheet.in
FLI7540
Revision history
5
Revision history
Table 3.
Date 13-Aug-2010
Document revision history
Revision 1 Initial release. Changes
Doc ID 17804 Rev 1
9/10
www.DataSheet.in
FLI7540
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
10/10
Doc ID 17804 Rev 1
www.DataSheet.in


▲Up To Search▲   

 
Price & Availability of FLI7540

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X