View UPG2022T5G-E1-A_895952.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
NEC's 4.8 TO 5.85 GHz UPG2022T5G HIGH POWER GaAs MMIC SPDT SWITCH
FEATURES
* * OPERATING FREQUENCY: f = 4.8 to 5.85 GHz LOW INSERTION LOSS: 0.8 dB TYP. @ f = 4.9 GHz 0.7 dB TYP. @ f = 5.2 GHz 0.8 dB TYP. @ f = 5.8 GHz * * * POWER HANDLING: Pin (0.1 dB) = +31 dBm TYP. @ f = 4.8 to 5.85 GHz CONTROL VOLTAGE: Vcont = +2.8 V/0 V HIGH ISOLATION: (Between INPUT and OUTPUT) = 23 dB TYP. @ f = 5.2 GHz (Between OUTPUT1 and OUTPUT2) = 22 dB TYP. @ f = 5.2 * * * * INPUT/OUTPUT RETURN LOSS: 10 dB MIN. @ f = 4.8 to 5.85 GHz SWITCHING SPEED: 20 ns @ tRISE/tFALL (10/90% RF) 6-PIN PLASTIC SON PACKAGE: (2.0 x 3.0 x 0.75 mm) LEAD FREE
DESCRIPTION
NEC's UPG2022T5G is a high power GaAs MMIC SPDT (Single Pole Double Throw) switch. This device can operate from 4.8 to 5.85 GHz with low insertion loss. It is housed in a 6-pin plastic SON package.
APPLICATIONS
* 5 GHz BAND WLAN * 5 GHz CORDLESS PHONES * 5 GHz ELECTRONIC TOLL COLLECTION * 5 GHz FIXED WIRELESS ACCESS
ORDERING INFORMATION
PART NUMBER UPG2022T5G-E1-A PACKAGE 6-pin plastic SON MARKING G4H SUPPLYING FORM * Embossed tape 8 mm wide * Pin 1 face the perforation side of the tape * Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPG2022T5G
California Eastern Laboratories
UPG2022T5G PIN CONNECTIONS
(Top View)
1 6 6 5 4
(Bottom View)
1 2 3
PIN NO. 1 2 3
PIN NAME OUTPUT1 GND OUTPUT2 Vcont2 INPUT Vcont1
G4H
PARAMETER PARAMETER
2 3
5 4
4 5 6
ABSOLUTE MAXIMUM RATINGS (TA =+25C, unless otherwise specified)
SYMBOL Vcont Pin TA Tstg RATINGS -6.0 to +6.0 +36 -45 to +85 -55 to +150
Note
UNIT V dBm C C
Switch Control Voltage Input Power Operating Ambient Temperature Storage Temperature
Notes | Vcont1 - Vcont2 | 6.0 V
RECOMMENDED OPERATING RANGE (TA =+25C, unless otherwise specified)
SYMBOL Vcont (H) Vcont (L) f TA MIN. 2.7 -0.2 4.8 -40 +25 TYP. 2.8 0 MAX. 3.3 0.2 5.85 +85 UNIT V V GHz C Switch Control Voltage (H) Switch Control Voltage (L) Operating Frequency Operating Ambient Temperature
UPG2022T5G
ELECTRICAL CHARACTERISTICS (TA = +25C, Vcont = 2.8 V/0 V, ZO = 50 , DC blocking capacitors = 27 pF,
Each port, unless otherwise specified)
PARAMETER Insertion Loss SYMBOL LINS TEST CONDITIONS f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz Isolation 1 (between OUTPUT1 and OUTPUT2) Input Return Loss ISL1 f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz RLin f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz Output Return Loss RLout f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz 0.1 dB Gain Compression Input Power Switching Control Speed Switching Control Current Pin (0.1 dB) f = 4.9 to 5.8 GHz MIN. - - - 13 15 15 10 10 10 10 10 10 30 TYP. 0.8 0.7 0.8 18 22 20 22 29 19 21 29 20 31 MAX. 1.1 1.1 1.1 - - - - - - - - - - UNIT dB dB dB dB dB dB dB dB dB dB dB dB dBm
tSW Icont
tRISE/tFALL (10/90% RF)
- -
20 0.5
- 1
ns A
STANDARD CHARACTERISTICS FOR REFERENCE
(TA = +25C, Vcont = 2.8 V/0 V, ZO = 50 , DC blocking capacitors = 27 pF, Each port, unless otherwise specified)
PARAMETER Isolation 2 (between INPUT and OUTPUT) SYMBOL ISL2 TEST CONDITIONS f = 4.9 GHz f = 5.2 GHz f = 5.8 GHz MIN. - - - TYP. 18 23 21 MAX. - - - UNIT dB dB dB
UPG2022T5G EVALUATION CIRCUIT
Vcont1
INPUT
Vcont2
27 pF 1 000 pF 1 000 pF
6
5
4
1
2
3
27 pF
27 pF
OUTPUT1
OUTPUT2
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
TRUTH TABLE OF SWITCHING BY CONDITION OF CONTROL VOLTAGE
VCONT1 VCONT (H) VCONT2 VCONT (H) Note OUTPUT1 INPUT OUTPUT2 INPUT OUTPUT2 OUTPUT1 VCONT (L)
VCONT (L) OUTPUT1 INPUT OUTPUT2 INPUT
Note OUTPUT1 OUTPUT2
Note In case of VCONT1 = VCONT2 = High or VCONT1 = VCONT2 = Low, (that is same control voltage for both pins), input signal of INPUT (Pin 5) is output from OUTPUT1 (Pin 1) and OUTPUT2 (Pin 3).
UPG2022T5G PACKAGE DIMENSIONS 6-PIN PLASTIC SON (UNIT:mm)
2.0 0.750.1
3.0
(Bottom View) 0.70.1 0.19
0.95
0.95
0.25+0.07 -0.05 0.290.1 0.290.1
0.35+0.07 -0.05
0.70.1
UPG2022T5G RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
05/18/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.

▲Up To Search▲

Price & Availability of UPG2022T5G-E1-A

	To Download UPG2022T5G-E1-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .