www.advantech.com/products online download features EKI-1121L eki-1122l ? arm7 32-bit 80mhz processor ? 8mb flash rom on board ? 16mb sdram ? 2 x 10/100 mbps ethernet ports for lan redundancy ? 1 or 2 software selectable rs-232/422/485 serial ports ? 50 bps to 921.6 kbps baud rate ? built-in real-time clock (rtc) ? class i, division 2 certifcation ? pre-installed linux kernel 2.4 platform specifcations system ? cpu arm7 32-bit risc cpu, 80 mhz ? flash 8 mb ? sdram 16 mb ? os (pre-installed) uclinux ? console port rs-232, 3-wire (tx, rx, gnd) pin-header ? other rtc, watchdog timer ethernet interface ? lan 2 x auto-sensing 10/100 mbps ports ? connector rj-45 ? protection 1.5 kv magnetic isolation protection serial interface ? serial standards software selectable rs-232/422/485 ports ? connectors d-sub 9 male ? protection 15 kv esd protection for all signals serial parameters ? data bits 5, 6, 7, 8 ? stop bits 1, 1.5, 2 ? parity none, even, odd, space, mark ? flow control rts/cts, xon/xoff, automatic rs-485 data fow control ? baud rate 50 bps to 921.6 kbps serial signals ? rs-232 txd, rxd, dtr, dsr, rts, cts, dcd, ri, gnd ? rs-422 txd+, txd-, rxd+, rxd-, gnd ? rs-485 data+, data-, gnd leds ? system os ready, power 1 and power 2 ready ? lan speed (10/100 mbps), link/active (on connector) ? serial txd, rxd mechanics ? dimensions 37 x 140 x 95 mm (w x h x d) ? housing metal ? weight 600g ? mounting din-rail, wall power requirements ? input voltage 12 ~ 48 v dc , redundant dual inputs ? power consumption 2.5 w software (uclinux) ? kernel version 2.4.31 ? protocol stack tcp, udp, ipv4, icmp, arp, snmp v1, http, dhcp, ntp, nfs, smtp, telnet, ftp, ppp, pppoe ? file system romfs/jffs2 ? system utility busybox, telnet, ftp, sash, tftp ? daemon pppd, snmpd, telnetd, inted, ftpd, boa ? linux tool chain arm-elf-gcc: c/c++ pc cross compiler ? uclibc posix standard library environmental limits ? operating temperature 0 ~ 60 c (32 ~ 140 f) ? storage temperature -20 ~ 80 c (-4 ~ 176 f) ? operating humidity 5 ~ 95 % rh regulatory approvals ? emc ce, fcc part 15 subpart b (class a) ? hazardous location ul/cul class i, division 2 ordering information ? EKI-1121L 1-port risc-based communication controller ? eki-1122l 2-port risc-based communication controller introduction EKI-1121L and eki-1122l are risc-based embedded communication controllers which provide dual auto-sensing 10/100 mbps ethernet ports for network redundancy and one or two software-selectable rs-232/422/485 serial ports. the EKI-1121L and eki-1122l use the arm7 risc cpu which is a powerful computing engine to fulfll data compression or protocol conversion requirements. the built-in 8 mb fash rom and 16 mb sdram provide user enough storage to run their specifc applications. 1-port risc-based industrial communication controller 2-port risc-based industrial communication controller EKI-1121L eki-1122l rohs compliant 2002/95/ec new
|