comset semiconductors 1/2 2N2322 thru 2n2326 all-diffused pnpn thyristors designed for grating operation in ma/ a signal or detection circuits maximum ratings (*) t j =125c unless otherwise noted, r gk =1000 ? symbol ratings 2N2322 2n2323 2n2324 2n2325 2n2326 v rsm(rep) peak reverse blocking voltage (1) 25 50 100 150 200 v v rsm(non-rep) non-repetitive peak blocking reverse voltage (t<5.0 ms) 40 75 150 225 300 v i t(rms) forward current rms (all conduction angles) 1.6 amp i tsm peak surge current (one-half cycle, 60hz) no repetition until thermal equilibrium is restored. 15 amp p gm peak gate power ? forward 0.1 w p g(av) average gate power ? forward 0.01 w i gm peak gate current ? forward 0.1 amp v gfm peak gate voltage ? forward 6.0 v v grm peak gate voltage ? reverse 6.0 v t j operating junction temperature range -65 to +125 t stg storage temperature range -65 to +150 c electrical characteristics t j =25c unless otherwise noted, r gk =1000 ? silicon thyristors
comset semiconductors 2/2 2N2322 thru 2n2326 symbol ratings 2N2322 2n2323 2n2324 2n2325 2n2326 v drm peak forward blocking voltage (1) min : 25 * 50 * 100 * 150 * 200 * v i rrm peak reverse blocking current (rated v drm, t j =125c) max : 100 * a i drm peak forward blocking current (rated v drm, t j =125c) max :100 * a forward ? on ? voltage i t =1.0 a peak max :1.5 v t i t =1.0 a peak, t c =85c max : 2.0* a gate trigger current (2) anode voltage=6.0 vdc, r l =100 ? max : 200 i gt anode voltage=6.0 vdc, r l =100 ? , t c =-65c max : 350 * a gate trigger voltage anode voltage=6.0 v, r l =100 ? max : 0.8 anode voltage=6.0 v, r l =100 ? , t c =-65c max : 1.0 * v gt v drm = rated, r l =100 ? , t j =125c min : 0.1 * v holding current anode voltage=6.0 v max : 2.0 anode voltage=6.0 v, t c =-65c max : 3.0 * i h anode voltage=6.0 v, t c =125c min : 0.15 * ma * jedec registered values 1) v rsm and v drm can be applied for all types on a continuous dc basis without incurring damage. 2) r gk current is not included in measurement. mechanical data case to-39 dimensions mm inches a 6,25 0,24 b 13,59 0,53 c 9,24 0,36 d 8,24 0,32 e 0,78 0,03 f 1,05 0,041 g 0,42 0,165 h 45 l5,10,2 pin 1 : cathode pin 2 : gate pin 3 : anode information furnished is believed to be accurate and reliable. however, cs assumes no responsability for the consequences of use of such information nor for errors that could appear. data are subject to change without notice.
|
