part number 5837-5003-10 snap-on interface facilitates assembly conforms to cecc interface specifications for mcx 30% smaller than smb connectors surface mount tape and reel for high volume m/a-com osx microminiature snap-on connectors offer an excellent blend of size, durability and performance for emerging applications in gps, automotive and wireless communications. osx connectors are 30% smaller than traditional snap-on smb connectors, offering greater packaging density and weight reduction. osx connectors are mechanically robust with beryllium copper spring fingers rated at a minimum of 500 mating cycles. the snap-on interface facilitates assembly, eliminating the need for a threaded connection, and ensuring full engagement. the forces to engage and disengage have been optimized to ensure ease of mating as well as to prevent damage to pcb solder connections. osx connectors are designed for broad band performance, dc-6 ghz, and can be utilized for future system upgrades without concerns for performance degradation. m/a-com osx connectors are fully mateable with standard mcx connectors and conform to the cecc interface specifications. osx connectors are available in a broad range of standard configurations for commercial applications. tape and reel packaging for osx surface mount straight and right angle pcb receptacles is available to facilitate high volume pick and place manufacturing. osx surface mount connectors are designed to withstand infrared reflow, convection and vapor phase soldering and provide a .254 mm (.010 in.) standoff for optimal board cleaning. osx plug and jack pcb receptacles also offer a direct board to board solu- tion providing a nominal 7.11mm (0.28in) separation. the osx connector series is a cost effective solution for the challenging demands of today? commercial market- place. m/a-com maintains an spc controlled and iso 9001 certified manufacturing environment to ensure uncom- promising quality. call your local m/a-com sales office or authorized distributor for more information or samples of the osx connector series. m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 osx(mcx) microminiature snap-on connectors series v4.00 typical mated height comparison typical vswr for osx right angle cable plug 16.48 (.649) circuit board plane smb osx 9.55 (.376) vswr 1.40 1.30 1.20 1.10 1 0.0 1.2 2.4 3.6 4.8 1 6.0 id 2010 (mcx)
materials brass alloys uns c36000 (astm-b16) or c38500 per qq-b626, beryllium copper per astm b- 196, ptfe fluorocarbon per astm-d-1457 finish center contacts: gold plated (mil-g-45204) over nickel plate (qq-n-290) outer contacts: gold plated (mil-g-45204) over nickel plate (oo-n-290) housings: nickel plated (qq-n-290), tin lead (mil-p-81728) or gold plated (mil-g-45204) all other metal parts shall be furnished so as to provide a connector which meets corrosion requirements. for additional plating finishes, contact the factory. design the design shall be such that the outline and interface dimensions shown in this catalog are met. frequency dc - 6 ghz nominal impedance 50 ohms voltage rating 335 volts (vrms maximum) @ sea level vswr 1.25: 1 maximum @ 4 ghz 1.35:1 maximum @ 6 ghz insulation resistance 10,000 megaohms minimum insertion loss .1db maximum/1000 mhz dielectric withstanding voltage 1000 volts (vrms minimum) @ sea level contact resistance center contact 5.0 milliohms maximum outer contact 1.0 milliohms maximum corona 70,000 ft. 250 volts (vrms minimum) @ mhz rf high potential @ sea level 670 volts (vrms minimum) @ mhz contact current 1.5 adc max force to engage 3.4 lbs. maximum force to disengage 1.77 lbs. minimum, 4.5 lbs. maximum contact captivation designed to maintain osx interface when mating connector durability 500 insertion and withdrawal cycles temperature rating -65?c + 165?c vibration mil-std-202, method 204, condition b shock mil-std-202, method 213, condition a moisture resistance mil-std-202, method 106 corrosion mil-std-202, method 101, condition b, 48 hours thermal shock mil-std-202, method 107, condition b performance data typical of 5837-5003-10. performance for other connectors will vary. m/a-com has design control and all data contained herein is subject to change without notice. contact the factory for specifica tions on other connector types. electrical m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 requirement detail osx (mcx) specifications general mechanical envi r onmental letter millimeters (inches) minimum maximum h 1.85 (.073) 1.98 (.077) i 3.42 (.135) 3.48 (.137) j 3.60(.142) 3.75 (.147) k 2.30 (.091) 2.80 (.110) l 2.60 (.103) 2.80 (.110) m 4.00 (.158) 4.12 (.162) n 0.75 (.0296) 0.85 (.0334) plug j a ck f e d dia. c dia. b a dia. g i dia. j dia. h dia. m l k n letter millimeters (inches) minimum maximum a 0.48 (.0189) 0.53 (.0208) b 2.00 (.0788) 2.07 (.0815) c 3.66 (.144) 3.76 (.148) d 0.00 (.000) 0.30 (.0118) e 2.80 (.111) 3.20 (.125) f 4.15 (.164) g 2.80 (.111) 3.20 (.125)
12.1 (.475) ref 6.12 (.241) 7.92 (.312) osx plug captured center contact part number cable 5831-5001-10 rg-174/u,188/u, 316/u non - captured center contact part number cable 5831-5002-10 rg-178/u, 196/u 5831-5003-10 rg-174/u,188/u, 316/u 5831-7316-10 rd-316 part number cable 5837-5006-10 rg-58/u part number cable 5807-5001-09 rg-174/u,188/u,316/u m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 osx (mcx) right angle cable plug solder attac hment finish: gold plated finish: nickel plated., for optional gold plate, change suffix to -09 note: for full crimp attachment consult factory straight cable plug finish: nickel plated, for optional gold plate, change suffix to -09 osx plug 16.18 (.637) ref 4.98 (.196) dia right angle cable plug crimp attac hment finish: nickel plated, for optional gold plate, change suffix to -09. 8.18 (.322) 3.48 (.137) 5.08 (.200) sq 6.12 (.241) 7.92 (.312) osx plug 3.1 (.122) dia part number cable 5837-5002-10 rg-178/u, 196/u 5837-5003-10 rg-188/u, 316/u, rg-179/u, rg-187/u 5837-5010-10 rd-316 5.08 (.200) sq 3.48 (.137) osx plug 4.98 (.196) 5.08 (.200) sq 6.86 (.270) 9.42 (.371) 11.43 (.450) ref decimal inch equivalents are shown in parentheses for general information only.
part number cable 5834-7396-10 rg-178/u, rg-196/u 5834-7388-10 rg-188/u, rg-316/u 5834-7316-10 rd-316 m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 for semi-rigid cab le .085 dia ?direct solder attac hment osx (mcx) decimal inch equivalents are shown in parentheses for general information only. printed cir cuit boar d bulkhead cable jack straight cable plug straight cable terminal without center contact finish: gold plated finish: nickel plated, for optional gold plate change suffix to -09. finish: nickel plated, for optional gold plate change suffix to -09. straight cable jack part number cable 5801-7985-09 rg-405/u (.085) finish: gold plated part number cable 5802-7985-09 rg-405/u (.085) 4.0 (.157) 5.79 (.228) dia 2.0 (.079) 4.37 (.172) dia 0.71 (.028) typ "a" ref "b" ref plane mounting surface recommended mounting hole osx jack retaining ring lockwasher 6.35 hex (.250) .190-56 uns-2a thickness 2.8 (.110) 16.8 (.661) ref 4.5 (.177) min 4.9 (.193) min 4.8 (.189) dia 5.08 (.200) max panel cable rg-174/u, 188/u, 316/u rg-178, 196/u part number 5818-5002-10 5818-5003-10 5818-5004-10 5818-5005-10 dim. a mm (inches) mm (inches) mm (inches) mm (inches) 11.76 (.463) 10.74 (.423) 12.01 (4.73) 11.00 (4.33) dim. b 3.94 (.155) 2.92 (.115) 3.94 (.155) 2.92 (.115) osx jack ref plane cable ref plane 4.98 (.196) dia 11.9 (.469) 3.05 (.120) dia 4.2 (.165) ref ref plane cable ref plane osx plug 11.48 (.452) 7.21 (.284) ref 3.05 (.120) dia 4.98 (.196) dia
part 5862-5002-10 5862-5003-10 5862-5004-10 number mm (inches) mm (inches) mm (inches) dim. a 8.28 (.326) 9.30 (.366) 7.09 (.279) dim. b 2.92 (.115) 3.94 (.155) 1.73 (.068) part number cable 5807-7985-09 rg405/u m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 osx (mcx) decimal inch equivalents are shown in parentheses for general information only. right angle plug receptacle printed cir cuit boar d "b" "a" 4.45 (.175) 3.0 (.118) typ 6.0 (.236) sq 5.08 (.200) typ 0.91 (.036) sq 2.54 (.100) typ 0.97 (.038) dia 4 places o sx jack ref plane 1.32 (.052) straight jack receptacle finish: gold plated straight plug receptacle finish: nickel plated, for optional gold plate change suffix to -09. finish: nickel plated, for optional gold plate change suffix to -09. straight end launch finish: tin lead plated. osx jack 1.02 (.040) 1.68 (.066) 3.91 (.154) 4.57 (.180) 6.35 (.250) sq 10.31 (.406) ref 4.70 (.185) 4.45 (.175) 0.51 (.020) 0.97 (.038) dia pin part number 5862-5018-13 4 places osx plug 5.77 (.227) 0.91 (.036) sq 0.97 (.038) dia 4.45 (.175) 3.94 (.155) 5.08 (.200) typ 6.0 (.236) sq 2.54 (.100) typ 3.0 (.118) typ 7.92 (.312) 6.12 (.241) 5.08 (.200) sq 3.48 (.137) 8.18 (.322) osx plug 3.1 (.122) dia part number 5863-0000-10
part number 5862-5007-13 part number 5899-5004-54 1 part number 5864-5008-13 part number 5899-5009-54 1 part 5864-5001-10 5864-5002-10 5864-5003-10 number mm (inches) mm (inches) mm (inches) dim. a 9.93 (.391) 7.72 (.304) 8.92 (.351) dim. b 3.94 (.155) 1.73 (.068) 2.92 (.115) m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 osx (mcx) bulkhead feedthr ough decimal inch equivalents are shown in parentheses for general information only. .508 (.020) 2.45 (.097) ref 6.5 (.256) 6.5 (.256) 2.54 (.100) typ 5.08 (.200) typ 9.5 (.374) 6.0 (.236) sq 0.91 (.036) sq 4 places osx jack ref plane 3.0 .118 typ 0.97 (.038) dia 3.5 (.138) finish: nickel plated, for optional gold plate change suffix to -09. max panel .190-56,uns-2a 5.5 across .217 flats osx jack 6.35 hex (.250) (.038) lockwasher recommended mounting hole 0.97 (.177) (.193) dia 2.5 (.098) 0.58 (.023) 6.5 (.256) dia 8.69 (.342) 4.5 min 4.9 dia min 6.0 (.236) sq 3.0 (.118) 9.5 (.374) 5.08 (.200) typ 2.54 (.100) typ 3.0 (.118) typ 0.91 (.036) sq "a" 6.5 (.256) 2.45 (.097) ref "b" 4 places osx jack ref plane 0.97 .038 dia finish: nickel plated, for optional gold plate change suffix to -09. right angle jack receptacle finish: tin lead plate 1 tape and reel packaging 750 connectors per reel (carrier width 24mm carrier pitch 12mm) surface mount finish: tin lead plated 1 tape and reel packaging 900 connectors per reel (carrier width 16mm, carrier pitch 12mm). 0.97 (.038) dia 2.54 (.100) typ 0.91 (.036) sq 3.0 .118 typ ref plane osx jack 4 places 1.83 (.072) .508 (.020) 6.0 (.236) sq 4.45 (.175) 5.9 (.231) ref 5.08 (.200) typ straight jack receptacle right angle jack receptacle jack receptacle part number 5858-0000-10
m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 osx (mcx) printed cir cuit boar d receptac les decimal inch equivalents are shown in parentheses for general information only. recommended mounting p attern f or micr ostrip line part numbers 5862-5007-13 and 5864-5008-13 are designed for surface mounting using infrared and vapor phase solder techniques. connector materials used include brass housings and teflon dielectric support bushings which are compatible with infrared and vapor phase soldering limits of 215 c. the infrared soldering method should employ a convection heating feature because of the shrouded center contact which is inherent to the osx straight coaxial connector design. (manual soldering techniques are not recommended because of the physical connector housing-to-board spacing of 1.29mm (.051 inches). the solder paste selection for reflow soldering techniques is generally a function of components used on printed wire board assembly. the metal content of the paste, for screening stencil applications, is generally 85-90% by weight. nozzle dispensing techniques will have a slightly lower content. solder paste thickness of 0.15mm (.006 inches) to 0.25mm (.010 inches) is recommended. standard electrical grade solders such as 63/37 (183?c), 60/40 (190?c) and 62/36/2 (189?c) are used for most applications. these types of solder employ a mild rosin/resin flux. notes: 1. printed wiring board material: glass opoxy fr-4 or similar; relative permittivity: 4.8, 1 oz. copper clad both sides. 2. these dimensions valid for 1.58 (.062) board thickness. 3. decimal inch equivalents are shown in parentheses for general information only. 8.89 (.350) 5.08 (.200) 2.54 (.100) 0.51 (.020) dia via 4 plcs 1.78 dia pad 5 plcs (.070) 1.27 (.050) 2.54 (.100) 4.45 (.175) 2.22 (.0875) 4 plcs 1 oz. copper area free of solder mask 11.43 (.450) 5.72 (.225) 2.54 (.100) 5.08 (.200) 9.53 (.375) t ypical reflo w temperature pr ofiles typical infrared and convection heating/soldering profile typical vapor phase heating/soldering profile
description part number crimp tool 5698-5014-54 die change tool 5698-5017-54 crimp die 5698-5015-54 description part number crimp tool 2598-5006-54 crimp die 2598-5007-54 m/a-com, inc. north america: tel. (800) 366-2266 n asia/pacific: tel. +85 2 2111 8088 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +85 2 2111 8087 fax +44 (1344) 300 020 between-series adapter s econo-crimp assemb l y kit osx (mcx) between-series adapter s and t ools decimal inch equivalents are shown in parentheses for general information only. mil-c-22520/5-01 t ype he x crimp kit the kit contains: all tools may be purchased separately. part number 2598-5005-54 the kit contains: all tools may be purchased separately. part number 2098-0105-54 consult factory for complete specifications. crimp die die size for use with part number rg/u cable 2598-5007-54 a 2.67 .08 hex 178b & 196a c 3.25 .08 hex 188a & 316 part number description 5880-2240-00 osx jack to sma jack 5881-2241-00 osx plug to sma plug 5882-2240-00 osx plug to sma jack 5882-2241-00 osx jack to sma plug crimp die die hex size for use with part number .08 rg/u cable 5698-5015-54 a 2.67 178b & 196a c 3.25 174,188a & 316 2098-0323-54 __ 3.84 rd-316
|
