30 watt medical power adapters description the TMP30 series of ac/dc switching power adapters are capable of delivering 25 to 30 watt output power. they are enclosed in a 94v-1 rated polyphenylene-oxide case with an iec320 inlet to mate with interchangeable cord for world-wide use. all models meet cispr 11 and fcc class b emission limits, and are designed for medical applications. features ? 10 standard desktop models. ? optional output connectors ? optional on/off switch ? 100% burn-in at full rated load ? 90vac to 264 vac universal input ? input surge current protection ? overvoltage protection ? overcurrent protection ? short-circuit protection with auto-recovery input specifications input voltage 85 to 264vac input frequency: 47 to 63hz input current 0.80a rms for 115vac 0.50a rms for 230vac leakage current: 90a max. @ 115vac, 60hz 150a max. @ 230vac, 50hz TMP30 series safety standard approvals output specifications output voltage/current see rating chart output power range 30 watts maximum ripple and noise 1% peak to peak maximum overvoltage protection set at 112-132% of the higher extreme of its nominal output voltage overcurrent protection the output is protected to short circuit conditions temperature coefficient all outputs 0.04%/oc maximum transient response maximum excursion of 4% or better on all models, recovering to 1% of final value within 500s after a 25% step load change environmental specifications operating temperature storage temperature relative humidity derating 0oc to +70oc -40oc to +85oc 5% to 95% non-condensing derate from 100% at +50oc linearly to 50% at +70oc general specifications switching frequency 70khz 5khz efficiency 70% minimum on all models with output voltage 7v or 65% minimum on the others hold-up time: 20ms minimum at 115vac line regulation: 0.5% maximum at full load inrush current: 15a @ 115vac, or 30a @ 230vac, at 25oc and cold start withstand voltage: 4000vac from input to output 1500vac from input to ground 500vac from output to ground mtbf: 400,000 hours minimum at full load at 25oc ambient, calculated per mil-hdbk-217f emc performance (en60601-1-2: 2001) en55011: class b conducted, class b radiated fcc: class b conducted, class b radiated vcci: class b conducted, class b radiated en61000-3-2: harmonic distortion, class a and d en61000-3-3: line flicker en61000-4-2: esd, 8kv air and 6kv contact en61000-4-3: radiated immunity, 3v/m for 80~2500mhz en61000-4-4: fast transient/burst, 2kv en61000-4-5: surge, 1kv diff, 2kv com. en61000-4-6: conducted immunity, 3vrms en61000-4-8: magnetic field immunity, 3a/m en61000-4-11: voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms ul 2601-1, csa c22.2 no. 601.1 tv en60601-1 (mdd) trumpower tumbler technologies + trumpower 3350 scott blvd., bldg. 13, santa clara, california 95054, usa phone: 408-988-6616 fax: 408-988-6622 email: sales@trumpower.com website: www.trumpower.com
medical grade TMP30 series output voltage/current rating chart o u t p u t maximum product no. vnom. imin. imax. tol. output power TMP30-05 5-6v 0a 5.0a 5% 25w TMP30-06 6-8v 0a 4.5a 5% 30w TMP30-09 9-11v 0a 3.4a 2% 30w TMP30-12 11-13v 0a 2.8a 2% 30w TMP30-15 13-17v 0a 2.4a 2% 30w TMP30-19 17-21v 0a 1.8a 2% 30w TMP30-24 21-27v 0a 1.5a 2% 30w TMP30-30 27-33v 0a 1.2a 2% 30w TMP30-36 33-39v 0a 1.0a 2% 30w TMP30-48 48v 0a 0.7a 2% 30w note: the output voltage can be adjusted by user in the stated range, or set by factory to a wanted value in the range upon the reque st of a user when ordering. mechanical specifications pin # notes: 1. dimensions shown in inch [mm] 2. tolerance 0.02[0.5] maximum 3. weight: 0.55kgs (1.21lbs.) approx. 4 . standard output connector is a 5-pin at 180 o male din. please contact trumpo wer for other connector options. pin chart pin product no. 1 2 3 4 5 TMP30-05 TMP30-15 TMP30-36 TMP30-06 TMP30-19 TMP30-48 TMP30-09 TMP30-24 TMP30-12 TMP30-30 return return output return output 5-pin din plug tumbler technologies + trumpower 3350 scott blvd., bldg. 13, santa clara, california 95054, usa phone: 408-988-6616 fax: 408-988-6622 email: sales@trumpower.com website: www.trumpower.com
|
