3 pole ac inlet iec320-c14 class power (with earth pin) protections: short circuit / overload / over voltage fully enclosed plastic case fix switching frequency and regulation topology: pwm 3882 circuit led indicator for power on approvals: ul / cul / tuv / cb / ce 1 year warranty specification P50A13A-R1B p50a13d-r1b p50a14e-r1b order no. safety model no. dc voltage note.2 rated current current range output setup, rise, hold up time voltage range frequency range efficiency (typ.) ac current input environment inrush current (max.) leakage current (max.) safety standards safety & emc (note. 7) working temp. working humidity storage temp., humidity temp. coefficient vibration mtbf dimension others note packing overload over voltage protection 5v psu50a-13a psu50a-13d psu50a-14e 12v 5v 12v 5v 15v 4a 2a 4a 2a 4a 1.5a 0.5 ~ 4.0a 0.5 ~ 2.0a 0.5 ~ 4.0a 0.5 ~2.0a 0.5 ~ 4.0a 0.5 ~ 1.5a rated power voltage adj. range fixed 1.5s, 50ms, 12ms at full load 90 ~ 264vac 135~ 370vac 47 ~ 63hz 1.6a / 100vac 70% 72% 74% 40a / 230vac 0.75ma / 240vac 5v: 110 ~ 140% of rated output voltage ul1950, csa22.2, en60950-1 approved withstand voltage isolation resistance i/p-o/p:3kvac , i/p-fg:1.5kvac i/p-o/p i/p-fg / 25 / 70% rh , :100m ohms / 500vdc 280k hrs min. mil-hdbk-217f (25 ) 0 ~ +40 (refer to output load derating curve) 20% ~ 90% rh non-condensing -20 ~ +85 , 10 ~ 95% rh 0.03% / (0 ~ 50 ) 10 ~ 500hz, 2g 10min./1cycle, period for 60min. each along x, y, z axes 147*76*43mm (l*w*h) 0.55kg; 36pcs / 21kg / carton 1.all parameters are specified at 230vac input, rated load, 25 70% rh ambi ent. 2.dc voltage: the output voltage set at point measure by plug terminal & 50% lo ad. 3.ripple & noise are measured at 20mhz by using a 12" twisted pair terminated w ith a 0.1uf & 47uf capacitor. 4.tolerence: includes set up tolerance, line regulation, load regul ation. 5.line regulation is measured from low line to high line at rated load. 6.load regulation is measured from 20% to 100% rated load. 7.the power supply is considered a component which will be installed into a f inal equipment. the final equipment must be re-confirmed that it still me ets emc directives. file name:p50a-t-spec 2007-05-14 tuv rheinland product safety geprufresicherheit compliance to en55022(cispr22) class b compliance to en61000-3-2,3 compliance to en61000-4-2,3,4,5,6,11, env50204, l criteria a ight industry level, harmonic current ems immunity connector plug cable standard type for stock other type available by customer requested r1b: din 5pin ; standard type for stock ther type available by customer requested awm2464 18awg*4c with shiell 4ft ; o -5v 0.5a 0.1 ~ 0.5a -12v 0.5a 0.1 ~0.5a -15v 0.5a 0.1 ~ 0.5a ripple & noise (max.) note.3 50mvp-p 46.5w 50w 50w 100mvp-p 50mvp-p 100mvp-p 50mvp-p 100mvp-p 100mvp-p 100mvp-p 100mvp-p voltage tolerance note.4 line regulation note.5 load regulation note.6 6.0% 10% 6.0% 10% 6.0% 10% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 10% 5.0% 10% 5.0% 10% 12% 1.0% 10% 12% 1.0% 10% 12% 1.0% 10% 46.5~50w ac-dc triple output desktop p 5 0 a - t s e r i e s features : emi conduction & radiation 150 ~ 250% rated output power protection type : hiccup mode, recovers automatically after fault con dition is removed protection type : shut down o/p voltage, re-power on to recover
pin no 12 3 4 5 output com com +5vdc - +vout vout 1 2 3 4 5 45 o p 5 0 a - t s e r i e s mechanical specification unit:mm plug assignment standard plug: r1b (option) derating curve static characteristics input voltage load (%) 0 50 60 70 60 100 260 80 90 100 80 ta ( ) load (%) 0 10 20 30 60 100 40 46.5~50w ac-dc triple output desktop p 5 0 a - t s e r i e s file name:p50a-t-spec 2007-05-14 76 38 21.5 69.9 144.5 rubber footx4 name plate 42 40 76 147 switching adaptor 54.8 10.2 power led 144.5 43 ul2464 18awg 1220+100/-0 43
|
