www.clare.com ds-paa132-r02 1 paa132 dual single-pole optomos ? relays part # description paa132 8 pin dip (50/tube) paa132s 8 pin surface mount (50/tube) PAA132STR 8 pin surface mount (1,000/reel) paa132 units blocking voltage 60 v p load current 600 ma max r on 1 applications features description ordering information pin configuration ? instrumentation ? multiplexers ? data acquisition ? electronic switching ? i/o subsystems ? meters (watt-hour, water, gas) ? medical equipment?patient/equipment isolation ? security ? aerospace ? industrial controls ? automotive ? small 8-pin package ? ttl/cmos compatible ? no moving parts ? high reliability ? arc-free with no snubbing circuits ? 3750v rms input/output isolation ? no emi/rfi generation ? machine insertable, wave solderable ? surface mount tape & reel version available the dual 1-form-a paa132 solid state relay has two independent, optically coupled, normally open, single-pole relays in a single 8-pin package. clare's patented optomos architecture makes available the optically coupled technology necessary to activate the output's efficient mosfet switches while providing a 3750v rms input-to-output isolation barrier. control of the isolated output is accomplished by means of a highly effective gaalas infrared led at the input. by incorporating two independent single-pole relays into a single 8-pin package, the paa132 saves board space by providing a more compact design solution than two discrete single-pole relays in a variety of applications. switching characteristics of normally open (form a) devices approvals ? ul recognized: file number e76270 ? csa certified: file number lr43639-10 ? en/iec 60950-1 compliant 1 2 3 4 8 7 6 5 + control - switch #1 - control - switch #1 + control - switch #2 - control - switch #2 load - switch #1 load - switch #1 load - switch #2 load - switch #2 paa132 pinout ac/dc configuration control i load 10% 90% t on t off + +
www.clare.com 2 paa132 r02 absolute maximum ratings are stress ratings. stresses in excess of these ratings can cause permanent damage to the device. functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. absolute maximum ratings (@ 25? c) parameter ratings units blocking voltage 60 v p reverse input voltage 5 v input control current peak (10ms) 50 ma 1a input power dissipation 1 150 mw total power dissipation 2 800 mw isolation voltage, input to output 3750 v rms operational temperature -40 to +85 c storage temperature -40 to +125 c 1 derate linearly 1.33 mw / oc 2 derate linearly 6.67 mw / oc parameter conditions symbol min typ max units output characteristics @ 25? load current continuous 1 -i l - - 600 ma peak t 10ms i lpk - - 2.0 a on-resistance i l =600ma r on - 0.85 1.0 off-state leakage current v l =60v i leak --1a switching speeds turn-on i f = 5ma, v l = 10v t on --5ms turn-off t off --2ms output capacitance v l = 50v, f=1mhz c out -25 -pf input characteristics @ 25? input control current i l = 600ma i f --2ma input dropout current - i f 0.2 - - ma input voltage drop i f = 10ma v f 0.9 1.2 1.4 v reverse input current v r = 5v i r - - 10 a common characteristics @ 25? capacitance input to output - c i/o -3 -pf 1 if both poles operate, the load current must be derated so that the package power dissipation value is not exceeded. electrical characteristics
paa132 www.clare.com 3 r02 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. paa132 typical led forward voltage drop (n=50, t a =25?, i f =5ma) 35 30 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 led forward voltage drop (v) device count (n) 35 30 25 20 15 10 5 0 device count (n) 0.83 0.84 0.86 0.85 0.89 0.87 0.88 paa132 typical on-resistance distribution (n=50, t a =25?, i l =600ma, i f =5ma) on-resistance ( ) 35 30 25 20 15 10 5 0 69.0 70.0 71.0 72.0 69.5 70.5 71.5 blocking voltage (v p ) device count (n) paa132 typical blocking voltage distribution (n=50, t a =25?) 0.41 0.45 0.49 0.39 0.43 0.47 0.51 led current (ma) device count (n) 25 20 15 10 5 0 paa132 typical i f for switch operation (n=50, t a =25?, i l =600ma) 25 20 15 10 5 0 0.41 0.45 0.49 0.39 0.43 0.47 0.51 led current (ma) device count (n) paa132 typical i f for switch dropout (n=50, t a =25?, i l =600ma) 0.75 0.85 0.95 1.05 0.80 0.90 1.00 turn-on (ms) device count (n) 25 20 15 10 5 0 paa132 typical turn-on time (n=50, t a =25?, i f =5ma, i l =100ma) 0.29 0.33 0.37 0.41 0.39 0.35 0.31 turn-off (ms) device count (n) 25 20 15 10 5 0 paa132 typical turn-off time (n=50, t a =25?, i l =100ma, i f =5ma) load current (a) 0.66 0.60 0.54 0.48 0.42 0.36 0.30 0.24 0.18 0.12 -40 -20 0 20 40 60 80 120 100 one pole operating paa132 maximum load current vs. temperature (i f =2ma) temperature (?) two poles operating leakage ( a) -40 0.016 0.014 0.012 0.010 0.008 0.006 0.004 0.002 0 -20 0 20 40 60 80 100 temperature (?) paa132 typical leakage vs. temperature (measured across pins 5&6, 7&8) (v p =60v) blocking voltage (v p ) -40 72 70 68 66 64 62 60 58 -20 0 20 40 60 80 100 temperature (?) paa132 typical blocking voltage vs. temperature i f = 5ma i f = 10ma turn-on (ms) -40 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -20 0 20 40 60 80 100 paa132 typical turn-on vs. temperature (i l =80ma) temperature (?) turn-off (ms) -40 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -20 0 20 40 60 80 100 i f = 10ma i f = 5ma paa132 typical turn-off vs. temperature (i l =80ma) temperature (?) performance data*
www.clare.com 4 paa132 r02 *the performance data shown in the graphs above is typical of device performance. for guaranteed parameters not indicated in t he written speci? cations, please contact our application department. performance data* temperature (?) -40 -20 0 20 40 60 80 100 120 led forward voltage drop (v) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 paa132 typical led forward voltage vs. temperature i f =50ma i f =1ma i f =2ma i f =5ma i f =10ma i f =20ma led forward current (ma) turn-on (ms) 0 5 1015202530354045 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 50 paa132 typical turn-on vs. led forward current (i l =80ma) led forward current (ma) turn-off (ms) 0 5 1015202530354045 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 50 paa132 typical turn-off vs. led forward current (i l =80ma) -40 1.2 1.1 1.0 0.9 0.8 0.7 0.6 -20 0 20 40 60 80 100 i f = 2ma paa132 typical on-resistance vs. temperature (i l =max rated @ temperature) on-resistance ( ) temperature (?) led current (ma) -40 -20 0 20 40 60 80 100 1.2 1.0 0.8 0.6 0.4 0.2 0 paa132 typical i f for switch operation vs. temperature (i l =300ma) temperature (?) led current (ma) -40 1.2 1.0 0.8 0.6 0.4 0.2 0 -20 0 20 40 60 80 100 paa132 typical i f for switch dropout vs. temperature (i l =300ma) temperature (?) load voltage (v) load current (ma) 600 400 200 0 -200 -400 -600 -0.6 -0.4 -0.2 0 0.2 0.4 0.6 paa132 typical load current vs. load voltage (t a =25?, i f =2ma) time load current (a) 10 s 1ms 100 s 100ms 1s 10ms 10s 100s paa132 energy rating curve 2.2 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 2.0 0 0.2
paa132 www.clare.com 5 r02 mechanical dimensions manufacturing information soldering for proper assembly, the component must be processed in accordance with the current revision of ipc/jedec standard j-std-020. failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. washing clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 8.077 0.127 (0.318 0.005) 9.144 0.508 (0.360 0.020) 0.457 0.076 (0.018 0.003) 9.652 0.381 (0.380 0.015) 8-pin dip through-hole package 7.239 typ. (0.285) 3.302 (0.130) 9.144 typ. (0.360 typ.) 7.620 0.254 (0.300 0.010) 4.064 typ (0.160 typ) 0.889 0.102 (0.035 0.004) pc board pattern dimensions mm (inches) 8-0.800 dia. (8-0.031 dia.) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) 6.350 0.127 (0.250 0.005) 8-pin surface mount package 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) 6.350 0.127 (0.250 0.005) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) 8.077 0.127 (0.318 0.005) 4.064 typ (0.160 typ) 0.889 0.102 (0.035 0.004) recommended pcb land pattern dimensions mm (inches) 3.302 (0.130) 4.445 0.127 (0.175 0.005) 7.620 0.254 (0.300 0.010) 0.635 0.127 (0.025 0.005) 0.254 0.127 (0.010 0.0005) 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255)
clare, inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publica tion and reserves the right to make changes to specifications and product descriptions at any time without notice. neither circuit patent licenses nor indemnity are expressed or implied. except as set forth in clare?s standard terms and conditions of sale, clare, inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products incl uding, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. the products described in this document are not designed, intended, authorized or warranted for use as components in systems in tended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of clare?s product may result in direct physical harm, i njury, or death to a person or severe property or environmental damage. clare, inc. reserves the right to discontinue or make changes to its products at any time without notice. specification: ds-paa132-r02 ? copyright 2007, clare, inc. optomos ? is a registered trademark of clare, inc. all rights reserved. printed in usa. 11/9/07 for additional information please visit our website at: www.clare.com 6 mechanical dimensions embossment embossed carrier top cover tape thickness 0.102 max. (0.004 max.) 330.2 dia. (13.00 dia.) p = 12.00 (0.472) user direction of feed w = 16.30 max (0.642 max) bo = 10.30 (0.406) ao = 10.30 (0.406) 18 k 1 = 4.20 (0.165) top cover tape k 0 = 4.90 (0.193) tape and reel packaging for 8-pin surface mount package note: tape dimensions not shown comply with jedec standard eia-481-2 dimensions mm (inches)
|
