View PL-2533_779812.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PL-2533 hi-speed usb ms pro / ms / sd / mmc card reader controller ic product datasheet document revision: 1.4 document update: february 2004 prolific technology inc. 7f, no. 48, sec. 3, nan kang rd. nan kang, taipei 115, taiwan, r.o.c. tel: 886-2-2654-6363 / fax: 886-2-2654-6161 email: sales@prolific.com.tw url: http://www.prolific.com.tw tech: http://tech.prolific.com.tw
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 2 - document version 1.4 revision history revision description date 1.4 1. modify pin assignment and pin diagram: pin5 change from sd_ms_ps to ms_ps#. pin26 change from sd_led# to acc_led1#. pin28 change from ms_led# to acc_led0#. pin33 change from nc to rxd. pin35 change from nc to txd. pin37 change from nc to ser_clk. 2. add pin description to pins 32 (sda) and 34 (sclk). feb 10, 2004 1.3 modify pin assignment: pin58 change from nc to sd_ps#. pin64 change from conf [4] to sd_cd#. july 28, 2003 1.2 modify pin assignment: pin17 [g16] change from nc to sd_wp. pin58 [gp17] change from sd_wp to nc. july 1, 2003 1.1 update following pin assignment diagram/table: pin 2 (nc) change to conf [0] pin 20 (nc) change to conf [1] pin 23 (nc) change to conf [2] pin 26 (nc) change to sd_led pin 30 (nc) change to conf [3] pin 64 (nc) change to conf [4] june 18, 2003 1.0 convert to formal release 1.0 june 11, 2003 0.5 correct offset 16 (iserialnumber) description june 2003 0.4 correct outline diagram to lqfp64 june 2003 0.3 modify the ms/ms-pro/sd/mmc descriptors june 2003 0.1 datasheet initial internal release may 2003
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 3 - document version 1.4 table of contents 1.0 features ......................................................................................................... 4 2.0 overview ......................................................................................................... 5 3.0 pin assignment and description............................................................. 6 3.1 pin assignment and description of PL-2533 lqfp64 ..............................................6 4.0 usb port descriptor ................................................................................. 9 4.1 usb descriptor of ms/ms_pro/sd/mmc device .....................................................9 4.1.1 d evice d escriptor of ms/ms_p ro /sd/mmc ...............................................................9 4.1.2 c onfiguration d escriptor of ms/ms_p ro /sd/mmc................................................10 4.1.3 i nterface d escriptor of ms/ms_p ro /sd/mmc........................................................10 4.1.4 b ulk o ut e ndpoint d escriptor (e ndpoint 1) ........................................................... 11 4.1.5 b ulk o ut e ndpoint d escriptor (e ndpoint 2) ........................................................... 11 5.0 dc characteristics ................................................................................... 12 5.1 absolute maximum ratings ................................................................................... 12 5.2 recommended operation conditions .................................................................... 12 5.3 general dc characteristics ................................................................................... 12 5.4 dc electrical characteristics for 3.3 v operation................................................... 13 6.0 outline diagram......................................................................................... 14 6.1 lqfp64pin outline diagram: ................................................................................. 14
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 4 - document version 1.4 1.0 features fully compliant with universal serial bus specification v2.0 compliant with memory stick standard format specifications v1.3 compliant with memory stick standard memory stick pro format specifications v1.0 complaint with secure digital (sd) specification v1.0 high performance ms pro read/write can reach up to 4mbyte/s and 1.4mbyte/s respectively on-chip usb 2.0 phy on-chip 3.3v-2.5v 150ma regulator for internal circuit mass storage class compatible ? no drivers needed for linux, mac os, windows me, 2000, xp or above (windows 98 requires additional driver installation) supports external serial eeprom to customize vendor/product related information advanced power management mechanism package type: lqfp64pin figure 1-1 block diagram of PL-2533
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 5 - document version 1.4 2.0 overview the PL-2533 is a single chip hi-speed usb card reader controller ic. it provides high speed transmission to memory stick pro/memory stick (ms pro/ms) as well as secure digital (sd) and multi media card (mmc) interfaces. the PL-2533 can be used as a removable storage disk whenever users need to exchange data between pcs or between pc and consumer electronic devices. with the PL-2533, users can transfer data, graphics, texts or digital images stored in various ms pro, ms, sd, or mmc cards to pc quickly and easily. to exploit the highest transfer rate of ms pro, the PL-2533 implements 4-bit parallel data transfer scheme. the write performance of ms pro can reach up to 1.4mbytes/sec and read performance of up to 4mbytes/sec. to take advantage of plug and play, the mass storage device is implemented according to the usb mass storage class. since the default driver is embedded within most of the current os, no extra driver is needed for linux, mac os, windows me/2000/xp and above. windows 98 requires additional driver installation.
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 6 - document version 1.4 3.0 pin assignment and description 3.1 pin assignment and description of PL-2533 lqfp64 PL-2533 dmrs dprs avcc3 agnd avcc3 gnd vcc3 vcc25 clock_sel nc vcc25 usbvcc vcc3 sd_cd# sd_dat[3] conf [0] sd_dat[2] sd_dat[1] ms_ps# sd_dat[0] sd_cmd sd_clk ms_sdio[3] ms_sdio[2] ms_sdio[1] vcc25 ms_sdio[0] vcc3 suspend gnd sd_wp nc ms_bs conf [1] vcc3 ms_ins conf [2] vcc25 ms_sck acc_led1# gnd acc_led0# vcc3 conf [3] gnd sda rxd sclk txd resetj ser_clk vcc25 gnd xsci xsco avcc3 agnd rref dm dp 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 sd_ps# gnd agnd rpu figure 1-2 pin assignment of PL-2533 lqfp64
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 7 - document version 1.4 table 2.1 pin descriptions of PL-2533 lqfp64 type p: power/ground o: output pin i: input pin b: bidirectional pin symbol type description 1 sd_dat[3] b sd data pin 2 conf [0] i configuration pin 3 sd_dat[2] b sd data pin 4 sd_dat[1] b sd data pin 5 ms_ps# o ms power switch 6 sd_dat[0] b sd data pin 7 sd_cmd o sd command pin 8 sd_clk o sd clock pin 9 ms_sdio[3] b ms data signal 10 ms_sdio[2] b ms data signal 11 ms_sdio[1] b ms data signal 12 vcc25 p 2.5v input 13 ms_sdio[0] b ms data signal 14 vcc3 p 3.3v input 15 suspend o chip suspend signal 1: suspend 0: normal operation 16 gnd p ground 17 sd_wp i sd write protect 18 nc 19 ms_bs o ms bus state signal 20 conf [1] i configuration pin 21 vcc3 p 3.3v input 22 ms_ins i ms insertion 23 conf [2] i configuration pin 24 vcc25 p 2.5v power 25 ms_sck o ms clock 26 acc_led1# o access led (off when ready; flashes during access) 27 gnd p ground 28 acc_led0# o access led (on when ready; flashes during access) 29 vcc3 p 3.3v power 30 conf [3] i configuration pin 31 gnd p ground 32 sda b i2c interface (data) to eeprom 33 rxd not used but should be tied to ground.
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 8 - document version 1.4 pin symbol type description 34 sclk o i2c interface (clock) to eeprom 35 txd not used but should be tied to ground. 36 resetj i optional external power-on-reset signal, active low. 37 ser_clk not used but should be tied to ground. 38 vcc25 p 2.5v power 39 gnd p ground 40 xsci i crystal input. the input frequency is 12m. 41 xsco o crystal output 42 avcc3 p analog 3.3v power 43 agnd p analog ground 44 rref i connect external reference resistor (12.5kohm 1%) to analog gnd 45 dm b usb2.0 data negative pin 46 dp b usb2.0 data positive pin 47 agnd p analog ground 48 rpu i connect external resistor (1.5kohm 0.1%) to avcc (analog 3.3v power) 49 dmrs b usb2.0 data negative pin, connect to external resister (39ohm 0.1%) 50 dprs b usb2.0 data positive pin, connect to external resister (39ohm 0.1%) 51 avcc3 p analog 3.3v power 52 agnd p analog ground 53 avcc3 p analog 3.3v power 54 gnd p ground 55 vcc3 p 3.3v power 56 vcc25 p 2.5v power output 57 clock_sel i select the operating clock of 8032. 1: the 8032 operates in 60m hz 0: the 8032 operates in 30m hz 58 sd_ps# o sd power switch 59 gnd p ground 60 nc 61 vcc25 p 2.5v power 62 usbvcc i use to detect the usb bus power. 63 vcc3 p 3.3v power 64 sd_cd# i sd card detection
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 9 - document version 1.4 4.0 usb port descriptor 4.1 usb descriptor of ms/ms_pro/sd/mmc device the ms/ms_pro/sd/mmc device supports the following standard usb descriptors: device descriptor. configuration descriptor. the ms/ms_pro/sd/mmc device has one default configuration descriptor that supports one interface. interface descriptor. the ms/ms_pro/sd/mmc device has single interface with one possible alternate. endpoint descriptor. the ms/ms_pro/sd/mmc device supports the following endpoints: o bulk-out endpoint for host-to-device data/command transfer. o bulk-in endpoint for device-to-host data/status transfer. 4.1.1 device descriptor of ms/ms_pro/sd/mmc table 4.1.1 device descriptor of ms/ms_pro/sd/mmc offset field size value description 0 blength byte 12h size of this descriptor in bytes. 1 bdescriptortype byte 01h device descriptor type. 2 bcdusb word 0200h usb specification version2.0 4 bdeviceclass byte 00h interface specific. 5 bdevicesubclass byte 00h interface specific. 6 bdeviceprotocol byte 00h interface specific. 7 wmaxpacketsize0 byte 40h maximum packet size for endpoint 0 is 64. 8 idvendor word 067bh vendor id for prolific technologies. 10 idproduct word 2533h product id for the ms/ms_pro. 12 bcddevice word 0001h device release 1.00. 14 imanufacturer byte 01h string index 1 describes manufacturer. (1) 15 iproduct byte 02h string index 2 describes the product. 16 iserialnumber byte 03h string index 3 describes the serial number. 17 bnumconfigurations byte 01h one possible configuration. n ote : (1) ? the default string is ? prolific technology inc. ? in unicode format and could be changed by customers.
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 10 - document version 1.4 4.1.2 configuration descriptor of ms/ms_pro/sd/mmc table 4.1.2 configuration descriptor of ms/ms_pro/sd/mmc offset field size value description 0 blength byte 09h size of this descriptor in bytes. 1 bdescriptortype byte 02h configuration descriptor type. 2 btotallength word 0020h 32 bytes of all configuration, interface, and endpoint descriptors. 4 bnuminterfaces byte 01h the embedded hub has one interface. 5 bconfigurationvalue byte 01h value to write to the device configuration register (dcr) to select this configuration. 6 iconfiguration byte 00h no string description for this configuration. 7 bmattributes byte 80h configuration characteristics: bus powered, no remote wakeup. 8 maxpower byte fah maximum power consumption is 500ma. 4.1.3 interface descriptor of ms/ms_pro/sd/mmc table 4.1.3 interface descriptor of ms/ms_pro/sd/mmc offset field size value description 0 blength byte 09h size of this descriptor in bytes. 1 bdescriptortype byte 04h interface descriptor type. 2 binterfacenumber byte 00h interface 0. 3 balternatesetting byte 00h alternate 0. 4 bnumendpoints byte 02h supports endpoint 0, and 1. 5 binterfaceclass byte 08h mass storage class 6 iinterfacesubclass byte 05h subclass code of 8070i transparent command set. 7 binterfaceprotocol byte 50h protocol code of bulk-only transport. 8 iinterface byte 00h no string descriptor for this interface.
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 11 - document version 1.4 4.1.4 bulk out endpoint descriptor (endpoint 1) table 4.1.4 bulk out endpoint 1 descriptor offset field size value description 0 blength byte 07h size of this descriptor in bytes. 1 bdescriptortype byte 05h endpoint descriptor type. 2 bendpointaddress byte 01h in endpoint 1. 3 bmattributes byte 02h bulk endpoint 4 wmaxpacketsize word 0200h maximum packet size is 512 bytes. 6 binterval byte 00h n/a 4.1.5 bulk out endpoint descriptor (endpoint 2) table 4.1.5 bulk out endpoint 2 descriptor offset field size value description 0 blength byte 07h size of this descriptor in bytes. 1 bdescriptortype byte 05h endpoint descriptor type. 2 bendpointaddress byte 82h in endpoint 1. 3 bmattributes byte 02h bulk endpoint 4 wmaxpacketsize word 0200h maximum packet size is 512 bytes. 6 binterval byte 00h n/a
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 12 - document version 1.4 5.0 dc characteristics 5.1 absolute maximum ratings table 5.1 absolute maximum ratings symbol parameter rating units vcc3 power supply -0.3 to 3.6 v avcc3 power supply -0.3 to 3.6 v vcc25 power supply -0.3 to 2.75 v vin input voltage -0.3 to vcc+0.3 v vout output voltage -0.3 to vcc+0.3 v tstg storage temperature -55 to 150 (tbd) c 5.2 recommended operation conditions table 5.2 recommended operatrion conditions symbol parameter min typ max units vcc3 commercial power supply 3.0 3.3 3.6 v avcc3 commercial power supply 3.0 3.3 3.6 v vcc25 commercial power supply 2.25 2.5 2.75 v vin input voltage 0 - vcc3 v tj commercial junction operation temperature 0 25 115 c 5.3 general dc characteristics table 5.3 general dc characteristics symbol parameter conditions min typ max units iil input leakage current no pull-up or pull-down -10 10 ua ioz tri-state leakage current -10 10 ua cin input capacitance 3.1 pf cout output capacitance 3.1 pf cbid3 bi-directional buffer capacitance 3.1 pf note: the capacitance listed above does not include pad capacitance and package capacitance.
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 13 - document version 1.4 5.4 dc electrical characteristics for 3.3 v operation table 5.4 dc electrical characteristics for 3.3v operation symbol parameter conditions min typ max units vil input low voltage cmos 0.3*vcc v vih input high voltage cmos 0.7*vcc v vt- schmitt trigger negative going threshold voltage cmos 0.8 1.10 v vt+ schmitt trigger positive going threshold voltage cmos 1.6 2.0 v vol output low voltage i ol = 2, 4, 8, 12, 16, 24 ma 0.4 v voh output high voltage i ol = 2, 4, 8, 12, 16, 24 ma 2.4 v ri input pull-up/pull-down resistance v il = 0v or v ih = vcc 75 k ?
release date february 2004 ds_pl2533_v14 PL-2533 product datasheet - 14 - document version 1.4 6.0 outline diagram 6.1 lqfp64pin outline diagram: figure 1-3 outline diagram of PL-2533 lqfp64

▲Up To Search▲

Price & Availability of PL-2533

	To Download PL-2533 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .