View WL36-B230_797674.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

u 306 sensick catalogue lichtschranken baureihe wl 27-2 w 36 photoelectric switches w 36: mastering complex tasks reliably users have long appreciated the benefits of the w 36 series of photoelectric switches. thanks to their design, the devices can be used both indoors and outdoors, since all dc types are suitable for temperatures ranging from C 40 to + 55 c and polarising filters also make it possible to detect shiny surfaces. the scanning ranges of the w 36 series speak for themselves: 60 metres for the ws/we 36 through-beam photoelectric switch, 22 metres for the wl 36 photoelectric reflex switch and 800 mm for the wt 36 photo- electric proximity switch, which also offers adjustable scanning distance and background suppression. great demands are often placed on the mechanical endurance of sensors. suitable enclosure rat- ings (depending on the type of connection) of ip 65 and ip 67, robust plastic housings, pre- failure signalling output and indi- cator, and insensitivity to ambient light ensure reliable switching in hostile industrial environments. universal voltage versions, time delay, test input and selectable light- or dark-switching are additional characteristic features of the w 36 series. photoelectric proximity switches, bgs photoelectric reflex switches through-beam photoelectric switches
307 sensick catalogue w 36 m wl 36 photoelec- tric reflex switches checking the pre- sence of beer crates before automatic removal of the bottle caps. n hot or cold, wet, dry or dusty C wl 36 photoelectric reflex switches are design- ed for use under hostile operating conditions indoors and outdoors C here they are being used on the roll-up gate of a carwash. v wl 36 sensors used to detect mesh baskets in front of a goods lift. m making sure that crates are full: wl 36 photoelectric reflex switches used to count coloured bottles before packaging.
0.015 C 0.3 s with dc only 0.5 C 12 s with dc 0.5 C 12 s with uc t 0 without time delay t 0 without time delay t 0 without time delay t 1 on-delay t 3 on-delay t 1 on-delay t 2 off-delay t 4 off-delay t 2 off-delay wt 36 photoelectric proximity switches, infrared light -- dc/uc, plug connection 308 sensick catalogue 20 64 28 34 85 6 max. 13 28 22 65 77 36 ?5.5 62 11 2 6 7 3 4 14 5 5 1 distance t 0.015-0.3 s t 0 t 0 t 3 t 1 t 4 t 2 0.5-12 s distance t rel. off rel. on t 0 t 0 t 1 t 1 t 2 t 2 0.5-12s 1 2 3 4 q 1 l+ m 3 2 4 q 1 2 4 1 l+ m 2 3 4 q q 5 5 6 6 te nc 7 1 2 3 4 5 1 l1 n nc nc 2 3 4 5 6 7 standard direction of the material being scanned alignment sight centre of optical axis, receiver centre of optical axis, sender led signal strength indicator m 5 threaded mounting hole C 5.5 mm deep mounting holes, recesses on both sides for m 5 hex nuts time delay selector switch with dc, time delay and light-/dark-switching selector switches with uc light-switching dark-switching time control scanning distance adjustment 8 0 1 photoelectric proximity switches scanning distance 200 . . . 800 mm robust plastic housing infrared light selectable time delay dimensional drawing wt 36-n 410 wt 36-p 410 wt 36-n 710 wt 36-p 710 wt 36-r 710 adjustments possible switch-selectable time delay connection types c v accessories page mounting brackets 510 cable receptacles 496 7 9 8 0 1 9 x 6 5 4 3 2 1 wt 36-n 410 wt 36-n 710 wt 36-r 710 4-pin, m 12 7-pin 7-pin wt 36-p 410 wt 36- p 710
wt 36 309 sensick catalogue (mm) 300 400 500 600 700 800 25 20 15 10 5 0 % of scanning distance 1 2 6%/90% 18%/90% 200 600 200 800 technical data wt 36- n 410 p410 n710 p710 r710 type part no. 1 011 109 order information wt 36-n 410 1 011 108 wt 36-p 410 1 006 370 wt 36-n 710 1 006 047 wt 36-p 710 1 005 927 wt 36-r 710 scanning distance 1) average service life 100,000 h at t a = + 25 c 2) limit values 3) may not exceed or fall short of v s tolerances 4) without load 5) provide suitable spark suppression for inductive or capacitive loads 9) a = v s connections reverse-polarity protected b = output q n and q p short-circuit protected c = interference pulse suppression 6) signal transit time with resistive load 7) with light/dark ratio 1:1 8) reference voltage 50 v dc, 250 v ac 1 2 scanning distance on black, 6 % remission 1 scanning distance on grey, 18 % remission 2 0 (mm) 200 400 600 800 scanning distance 200 . . . 800 mm, adjustable light source 1) , light type led, infrared light light spot diameter approx. 15 mm at 800 mm supply voltage v s 10...30 vdc 2) 24 . . . 240 v uc (+ 10 % /C 25 %) ripple 3) 5 v ss current consumption 4) 50 ma power consumption < 2 va switching outputs pnp, q and q C npn, q and q C spdt, isolated 5) output current i a max. 200 ma max. switching voltage ac: 250 v / dc: 120 v switching current 4 a / 240 v ac or 24 v dc max. switching capacity ac: 1000 va / dc: 100 w response time 6) 2 ms 6 ms max. switching frequency 7) 250/s 10/s test input te, sender off pnp: test input to 0 v npn: test input to v s connection types plug vde protection class 8) v circuit protection 9) a, b, c a, c enclosure rating ip 65 ip 67 ambient temperature t a operation C40 c...+ 55 c operation C25 c...+ 55 c storage C25 c...+75 c weight approx. 200 g housing material glass-fibre-reinforced plastic
310 sensick catalogue wt 36 photoelectric proximity switches, infrared light -- dc/uc, terminal connection t 0 t 0 t 3 t 1 t 4 t 2 0.015-0.3s 0.5-12s t distance 1 2 3 4 5 t 0 t 0 t 1 t 1 t 2 t 2 rel. on 0.5-12s rel. off t distance 1 2 3 4 5 20 64 28 34 85 6 18 28 16 88 100 36 ?5.5 62 11 2 6 7 3 4 5 14 5 1 1 2 3 4 5 l+ m q q te 1 2 3 4 5 l1 n 0.015 C 0.3 s with dc only 0.5 C 12 s with dc 0.5 C 12 s with uc t 0 without time delay t 0 without time delay t 0 without time delay t 1 on-delay t 3 on-delay t 1 on-delay t 2 off-delay t 4 off-delay t 2 off-delay standard direction of the material being scanned alignment sight centre of optical axis, receiver centre of optical axis, sender led signal strength indicator m 5 threaded mounting hole C 5.5 mm deep mounting holes, recesses on both sides for m 5 hex nuts time delay selector switch with dc, time delay and light-/dark-switching selector switches with uc light-switching dark-switching time control scanning distance adjustment terminal connection 8 photoelectric proximity switches scanning distance 200 . . . 800 mm robust plastic housing infrared adjustable background suppression easily accessible terminal chamber selectable time delay dimensional drawing wt 36-n 210 wt 36-p 210 wt 36-r 210 adjustments possible switch-selectable time delay connection types c v 7 8 0 1 1 1 1 1 9 6 5 4 3 2 1 wt 36-n 210 wt 36-r 210 pg 11, terminals pg 11, terminals wt 36-p 210 0 1 9 x accessories page mounting brackets 510
311 sensick catalogue wl 27-2 wt 36 (mm) 300 400 500 600 700 800 25 20 15 10 5 0 % of scanning distance 1 2 6%/90% 18%/90% 200 600 200 800 technical data wt 36- n 210 p210 r 210 type part no. 1 010 109 order information wt 36-n 210 1 010 108 wt 36-p 210 1 010 110 wt 36-r 210 scanning distance 1 2 0 (mm) 200 400 600 800 scanning distance 200 . . . 800 mm, adjustable light source 1) , light type led, infrared light light spot diameter approx. 15 mm at 800 mm supply voltage v s 10...30 vdc 2) 24 . . . 240 v uc (+ 10 % /C 25 %) ripple 3) 5 v ss current consumption 4) 50 ma power consumption < 2 va switching outputs pnp, q and q C npn, q and q C spdt, isolated 5) output current i a max. 200 ma max. switching voltage ac: 250 v / dc: 120 v switching current 4 a / 240 v ac or 24 v dc max. switching capacity ac: 1000 va / dc: 100 w response time 6) 2 ms 6 ms max. switching frequency 7) 250/s 10/s test input te, sender off pnp: test input to 0 v npn: test input to v s connection types terminal connection vde protection class 8) v circuit protection 9) a, b, c a, c enclosure rating ip 67 ambient temperature t a operation C40 c...+ 55 c operation C25 c...+ 55 c storage C25 c...+70 c weight approx. 200 g housing material glass-fibre-reinforced plastic 1) average service life 100,000 h at t a = + 25 c 2) limit values 3) may not exceed or fall short of v s tolerances 4) without load 5) provide suitable spark suppression for inductive or capacitive loads 9) a = v s connections reverse-polarity protected b = output q n and q p short-circuit protected c = interference pulse suppression 6) signal transit time with resistive load 7) with light/dark ratio 1:1 8) reference voltage 50 v dc, 250 v ac scanning distance on black, 6 % remission 1 scanning distance on grey, 18 % remission 2
312 sensick catalogue wl 36 photoelectric reflex switches, red light -- dc 20 48 12 52 85 6 max. 45 28 16 60 72 36 ?5.5 62 11 1 5 6 2 3 4 14 4 1 2 3 4 5 6 2b 1 a t0 1 2 3 4 5 6 l+ m alarm q p q n te 1 2 3 4 alarm 1 l+ m 3 2 4 q p 5 1 2 3 4 alarm 1 l+ m 2 3 4 q n q p 5 5 6 6 te nc 7 1 2 3 4 1 l+ m (alarm) 2 3 q p (q n ) 5 6 4 alignment sight centre of optical axis, receiver centre of optical axis, sender led signal strength indicator m 5 threaded mounting hole C 5.5 mm deep mounting holes recesses on both sides for m 5 hex nuts on/off timer switch t = time on, 0 = time off time delay 1 on-delay 2 off-delay time control 0.02 to 1 s light/dark selector a = light-switching, b = dark-switching sensitivity adjustment terminal connections 8 photoelectric reflex switches scanning range 22 m robust plastic housing visible red light selectable time delay dimensional drawing wl 36-b 230 wl 36-b 430 wl 36-b 730 wl 36-b 330 adjustments possible connection types c v accessories page mounting brackets 510 cable receptacles 496 attachable heated cover 556 reflectors 520 7 1 1 6 5 4 3 2 1 wl 36-b 230 wl 36-b 430 wl 36-b 730 wl 36-b 330 pg 11, terminals 4-pin, m 12 7-pin 3-pin 0 1 9 8 7 1 1 2 1 2 1 0 1 9
313 sensick catalogue wl 27-2 wl 36 (m) 5 10 15 20 25 100 10 1 operating reserve 1 3 5 scanning range, max. typical operating range 0.25 3 22 12 18 16 16 11 0.1 12 0.1 11 0.1 11 0.1 7 0.1 15 0.3 9 technical data wl 36- b 230 b 430 b730 b 330 pl 80 a c 110 pl 50 a pl 40 a 0.1...15.0m operating range 0.3...9.0m 0.1...12.0m 0.1...11.0m pl 30 a 0.1...11.0m pl 20 a 0.1...7.0 m reflective tape 0.25...3.0 m ?diamond grade? 7 6 5 4 3 2 1 reflector type type part no. 1 005 385 order information wl 36-b 230 1 010 612 wl 36-b 430 1 008 848 wl 36-b 730 1 005 787 wl 36-b 330 operating range and operating reserve 6 7 5 4 3 2 1 0 (m) 4 8 12 16 18 24 operating range scanning range, max. typical 1) average service life 100,000 h at t a =+25c 2) limit values 3) may not exceed or fall short of v s tolerances 4) without load 9) a = v s connections reverse-polarity protected b = output q n and q p short-circuit protected c = interference pulse suppression 5) signal transit time with resistive load 6) with light/dark ratio 1:1 7) signal reserve 50 % 8) reference voltage 50 v dc scanning range, max. typ./on reflector 22 m /pl 80 a sensitivity adjustable light source 1) , light type led, red light light spot diameter approx. 50 mm at 3 m supply voltage v s 10...30 vdc 2) ripple 3) 5 v ss current consumption 4) 40 ma switching outputs pnp: q p and npn q n pnp: q p pnp: q p or npn q n light-/dark-switching switch-selectable output current i a max. 200 ma response time 5) 1.25 ms max. switching frequency 6) 400/s pre-failure signalling output alarm, pnp, open collector internal resistance 1.5 k ? 5% operating condition correct 7) output high (v s C 1.5 v) operating condition faulty switching periodically at 5/s to v s test input te sender switched off sender off test input to 0 v connection type pg cable gland plug vde protection class 8) v circuit protection 9) a, b, c enclosure rating ip 67 ip 65 ambient temperature t a operation C40 c...+ 55 c storage C40 c...+70 c weight approx. 165 g polarising filter housing material glass-fibre-reinforced plastic
314 sensick catalogue wl 36 photoelectric reflex switches, red light -- uc 20 48 12 52 85 6 max. 45 28 16 60 72 36 ?5.5 62 11 1 5 6 2 3 4 14 4 1 2 3 4 5 l1 n 1 2 3 4 5 1 l1 n nc nc 2 3 4 5 6 7 1 2 3 4 5 6 2b 1 a t0 alignment sight centre of optical axis, receiver centre of optical axis, sender led signal strength indicator m 5 threaded mounting hole C 5.5 mm deep mounting holes recesses on both sides for m 5 hex nuts on/off timer switch t = time on, 0 = time off time delay 1 on-delay 2 off-delay time control 0.5 to 12 s light/dark selector a = light-switching, b = dark-switching sensitivity adjustment terminal connections 8 photoelectric reflex switches scanning range 22 m robust plastic housing visible red light easily accessible terminal chamber selectable time delay dimensional drawing wl 36-r 230 wl 36-r 230 adjustments possible connection types c v accessories page mounting brackets 510 cable receptacles 496 attachable heated cover 556 reflectors 520 7 1 1 6 5 4 3 2 1 wl 36-r 230 wl 36-r 730 pg 11, terminals 7-pin 0 1 9 8 7 1 1 2 1 2 1 0 1 9
315 sensick catalogue wl 27-2 wl 36 (m) 5 10 15 20 25 100 10 1 operating reserve 1 3 5 scanning range, max. typical operating range 0.25 3 22 12 18 16 16 11 0.1 12 0.1 11 0.1 11 0.1 7 0.1 15 0.3 9 technical data wl 36- r 230 r730 pl 80 a c 110 pl 50 a pl 40 a 0.1...15.0m operating range 0.3...9.0m 0.1...12.0m 0.1...11.0m pl 30 a 0.1...11.0m pl 20 a 0.1...7.0 m reflective tape 0.25...3.0 m ?diamond grade? 7 6 5 4 3 2 1 reflector type type part no. 1 005 387 order information wl 36-r 230 1 008 849 wl 36-r 730 operating range and operating reserve 6 7 5 4 3 2 1 0 (m) 4 8 12 16 18 24 operating range scanning range, max. typical 1) average service life 100,000 h at t a = + 25 c 2) provide suitable spark suppression for inductive or capacitive loads 3) with light/dark ratio 1:1 4) reference voltage 250 v ac 5) a = v s connections reverse-polarity protected c = interference pulse suppression scanning range, max. typ./on reflector 22 m /pl 80 a sensitivity adjustable light source 1) , light type led, red light light spot diameter approx. 50 mm at 3 m supply voltage v s 24 . . . 240 v uc (+ 10 % / C 25 %) power consumption < 2 va switching output spdt, isolated 2) max. switching voltage ac: 250 v / dc: 120 v max. switching current 4 a / 240 v ac or 24 v dc max. switching capacity ac: 1000 va / dc: 100 w response time 20 ms max. switching frequency 3) 10/s light-/dark-switching switch-selectable connection types pg cable gland plug vde protection class 4) v circuit protection 5) a, c enclosure rating ip 67 ip 65 ambient temperature t a operation C25 c...+ 55 c storage C40 c...+70 c weight approx. 165 g polarising filter housing material glass-fibre-reinforced plastic
316 sensick catalogue ws/we 36 through-beam photoelectric switches, infrared light -- dc 20 48 12 52 85 6 max. 45 28 16 60 72 36 ?5.5 62 11 1 5 6 2 3 4 14 4 1 2 3 4 5 6 l+ m alarm q p q n 1 2 3 4 alarm 1 l+ m 2 3 4 q p 5 1 2 3 4 alarm 1 l+ m 2 3 4 q n q p 5 5 6 6 te nc 7 1 2 3 4 5 6 l+ m te 1 2 3 te l+ m 1 2 3 4 1 l+ m 2 5 6 te 1 2 3 4 5 6 2b 1 a t0 alignment sight centre of optical axis, receiver centre of optical axis, sender led signal strength indicator, top and front m 5 threaded mounting hole C 5.5 mm deep mounting holes recesses on both sides for m 5 hex nuts on/off timer switch t = time on, 0 = time off time delay 1 on-delay 2 off-delay time control 0.02 to 1 s light/dark selector a = light-switching, b = dark-switching sensitivity adjustment terminal connections 8 through-beam photoelectric switches scanning range 60 m robust plastic housing infrared light selectable time delay dimensional drawing ws/we 36-b 230 ws/we 36-b 430 ws/we 36-b 730 adjustments possible connection types c v accessories page mounting brackets 510 cable receptacles 496 attachable heated cover 556 7 1 1 6 5 4 3 2 1 pg 11, terminals sender receiver 4-pin, m 12 7-pin 0 1 9 8 7 1 1 2 1 2 1 0 1 9 ws/we 36-b 230 ws/we 36-b 430 ws/we 36-b 730
317 sensick catalogue wl 27-2 ws/we 36 (m) 30 40 50 60 100 10 1 operating reserve operating range scanning range, max. typical 60 technical data ws/we 36- b 230 b 430 b730 type part no. 1 010 922 order information 1 011 107 1 011 114 operating range and operating reserve 0 (m) 10 20 30 40 50 60 operating range scanning range, max. typical ws/we 36-b 230 ws/we 36-b 430 ws/we 36-b 730 050 scanning range, max. typical 60 m sensitivity adjustable light source 1) , light type led, infrared light light spot diameter approx. 1300 mm at 25 m supply voltage v s 10...30 vdc 2) ripple 3) 5 v ss current consumption 4) 40 ma switching outputs pnp: q p and npn q n pnp: q p light-/dark-switching switch-selectable output current i a max. 200 ma response time 5) 2.5 ms max. switching frequency 6) 400/s pre-failure signalling output alarm, pnp, open collector internal resistance 1.5 k ? 5% operating condition correct 7) output high (v s C 1.5 v) operating condition faulty switching periodically at 5/s to v s test input te sender switched off sender off test input to 0 v connection types pg cable gland plug vde protection class 8) v circuit protection 9) a, b, c enclosure rating ip 67 ip 65 ambient temperature t a operation C40 c...+ 55 c storage C40 c...+70 c weight approx. 160 g housing material glass-fibre-reinforced plastic 1) average service life 100,000 h at t a =+25c 2) limit values 3) may not exceed or fall short of v s tolerances 4) without load 9) a = v s connections reverse-polarity protected b = output q n and q p short-circuit protected c = interference pulse suppression 5) signal transit time with resistive load 6) with light/dark ratio 1:1 7) signal reserve 50 % 8) reference voltage 50 v dc
318 sensick catalogue ws/we 36 through-beam photoelectric switches, infrared light -- uc 20 48 12 52 85 6 max. 45 28 16 60 72 36 ?5.5 62 11 1 5 6 2 3 4 14 4 1 2 3 4 5 l1 n 1 2 3 4 5 1 l1 n nc nc 2 3 4 5 6 7 1 2 3 4 5 l1 n 1 2 3 4 1 l1 n 3 5 6 1 2 3 4 5 6 2b 1 a t0 alignment sight centre of optical axis, receiver centre of optical axis, sender led signal strength indicator, top and front m 5 threaded mounting hole C 5.5 mm deep mounting holes recesses on both sides for m 5 hex nuts on/off timer switch t = time on, 0 = time off time delay 1 on-delay 2 off-delay time control 0.5 to 12 s light/dark selector a = light-switching, b = dark-switching sensitivity adjustment terminal connections 8 through-beam photoelectric switches scanning range 60 m robust plastic housing infrared light easily accessible terminal chamber selectable time delay dimensional drawing ws/we 36-r 230 ws/we 36-r 730 adjustments possible connection types c v accessories page mounting brackets 510 cable receptacles 496 attachable heated cover 556 7 1 1 6 5 4 3 2 1 pg 11, terminals sender receiver 7-pin 0 1 9 8 7 1 1 2 1 2 1 0 1 9 ws/we 36-r 230 ws/we 36-r 730
319 sensick catalogue wl 27-2 ws/we 36 (m) 30 40 50 60 operating range 100 10 1 operating reserve scanning range, max. typical technical data ws/we 36- r 230 r730 type part no. 1 010 978 order information 1 010 980 operating range and operating reserve ws/we 36-r 230 ws/we 36-r 730 60 0 (m) 10 20 30 40 50 60 operating range scanning range, max. typical 050 1) average service life 100,000 h at t a = + 25 c 2) provide suitable spark suppression for inductive or capacitive loads 3) with light/dark ratio 1:1 4) reference voltage 250 v ac 5) a = v s connections reverse-polarity protected c = interference pulse suppression scanning range, max. typ./on reflector 60 m sensitivity adjustable light source 1) , light type led, infrared light light spot diameter approx. 1300 mm at 25 m supply voltage v s 24 . . . 240 v uc (+ 10 % / C 25 %) power consumption < 2 va switching output spdt, isolated 2) max. switching voltage ac: 250 v / dc: 120 v max. switching current 4 a / 240 v ac or 24 v dc max. switching capacity ac: 1000 va / dc: 100 w response time 20 ms max. switching frequency 3) 10/s light-/dark-switching switch-selectable connection types pg cable gland plug vde protection class 4) v circuit protection 5) a, c enclosure rating ip 67 ip 65 ambient temperature t a operation C25 c...+ 55 c storage C40 c...+70 c weight approx. 160 g housing material glass-fibre-reinforced plastic

▲Up To Search▲

Price & Availability of WL36-B230

	To Download WL36-B230 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .