4/14 4 options : with catalogue products available to order motor gearbox maximum permitted continuous- rated gearbox output torque over 10 million revolutions single stage gearbox gears (1) except for 100 rpm version plastic gears base speed of motor (with nominal load) 50 hz axial load (dynamic) radial load (dynamic) absorbed power usable motor power cos ? (power factor) maximum temperature rise ambient temperature weight (approximate) voltages / frequencies 24-115-240v - 50hz 24-115v - 60hz coil with flying leads (length 250 mm) electro-mechanical brake (see page 4/23) torque /speed curves 26 32.5 130/3 67.6 598/7 130 types voltage and frequency single-direction asynchronous geared motors general characteristics applications -o ffice equipment -m edical equipment -r oasting and kebab spits - automatic feeders - automatic barriers -t ravelators -m echanised advertising hoardings - peristaltic pumps - turntables - light displays made to order products, available on request motors : - other voltages and frequencies - lead length - oversized winding (see page 4/4) - for vertical operation (see page 4/23) - cooling fan (see page 4/24) - coil supplied with thermal cut-out to suit duty factor 100 ?, 120 ?, or 130 ?. - ul/csa approved products - rear shaft extension gearboxes : - other output speeds - other output shafts - output shaft carried in needle roller bearings - special cover (see page 4/23) output speeds (rpm) ratios (i) 82 664 0 230 v 50 hz clockwise or anti-clockwise 82 644 0 230 v 50 hz clockwise or anti-clockwise 82 624 0 230 v 50 hz clockwise or anti-clockwise 82 600 0 81 034 0 0.6 plastic 2600 3.5 5 23.8 3.1 0.53 70 -5 +60 850 82 620 0 81 034 0 0.6 plastic 2600 3.5 5 23.7 5.2 0.57 70 -5 +60 1000 82 640 0 81 034 0 0.6 plastic 2600 3.5 5 28.4 8.2 0.57 70 -5 +60 1300 82 660 0 81 034 0 0.6 plastic 2600 3.5 5 32 9.5 0.57 70 -5 +60 1600 nm rpm da.n da.n w w ? ? g 100 80 60 38.4 30.4 20 direction of rotation rpm long life quiet running sintered bearings, lubricated for life speeds from 20 to 100 rpm usable powers from 3 w to 9 w ul - csa approved see page 4/6 ip00 degree of protection other information basic principles see page 4/3 insulation class iec 85 : a speed rises by 20 % for a change in supply frequency from 50 hz to 60 hz. 82 604 0 230 v 50 hz clockwise or anti-clockwise
4/15 4 to order, specify : standard products, non stocked made to order products available on request 82 600 0 81 032 0 1.2 metal (1) 2600 3.5 5 23.8 3.1 0.53 70 -5 +60 950 dimensions 82 604 0 - 82 624 0 - 82 644 0 - 82 664 0 82 602 0 - 82 622 0 - 82 642 0 - 82 662 0 82 620 0 81 032 0 1.2 metal (1) 2600 3.5 5 23.7 5.2 0.57 70 -5 +60 1100 82 640 0 81 032 0 1.2 metal (1) 2600 3.5 5 28.4 8.2 0.57 70 -5 +60 1400 82 660 0 81 032 0 1.2 metal (1) 2600 3.5 5 32 9.5 0.57 70 -5 +60 1700 3 holes m5 at 120 depth 7.5 3 holes m5 at 120 depth 7.5 across flat 8 holes m4 depth 7.5 type l1(mm) l2(mm) l3(mm) 82 604 0 14 35 84 82 624 0 20 42.6 90 82 644 0 30 52.6 100 82 664 0 40 62.6 110 type l1(mm) l2(mm) l3(mm) 82 602 0 14 35 84 82 622 0 20 42.6 90 82 642 0 30 52.6 100 82 662 0 40 62.6 110 82 602 0 230 v 50 hz clockwise or anti-clockwise 82 622 0 230 v 50 hz clockwise or anti-clockwise 82 642 0 230 v 50 hz clockwise or anti-clockwise rpm 82 662 0 230 v 50 hz clockwise or anti-clockwise 2 3 4 5 1 type voltage and frequency direction of rotation output speed option example : single - direction asynchronous geared motor - 82 604 0 - 230 v - 50 hz - cw - 100 rpm - electro-mechanical brake 5 4 3 2 1 supply connection by 2 tags type 6.35 supply connection by 2 tags type 6.35 5 across flat (shaft pushed-in ) (shaft pushed-in ) 8 holes m4 depth 7.5
|
