www.perkinelmer.com/opto lighting imaging telecom fiber-optic receiver modules 10 gbps series srap10 fiber-optic receiver modules description the srap10 series incorporates a high- speed ingaas photodiode with a low- noise gaas hbt transimpedance ampli- fier in an 8 pin butterfly package for digital communication applications. the srap10 series conforms to synchronous optical network (sonet) requirements for oc-192 (10 gbps) receivers used in long-range, intermedi- ate-range and short-range applications. receiver modules are available in her- metically sealed fibered packages with single-mode fiber. committed to supplying the highest quality products, perkinelmer optoelectronics is certified to meet iso 9001. the srap10 series is designed to satisfy telcordia quality specification gr-468-core. all devices undergo periodic process qualification programs to assure high reliability. applications ? short, intermediate and long-haul receivers for sonet/sdh ? dwdm systems ? high-speed networks test equipment features ? ingaas pin detector ? low-noise gaas hbt tia ? 10 gbps receiver (oc-192) ? internally bevelled fiber for low return loss ? fibered and connectorized modules ? single polarity power supply datasheet
srap10 figure 1. mechanical dimensions specifications 01-003:051201/2 www.perkinelmer.com/opto parameter srap10 units min typ max bandwidth (-3db, 50 ohms) 8 9 ghz responsivity, single-ended (1300 - 1600 nm) 320 400 v/w effective transimpedance 400 500 ohms sensitivity (ber=10 -10 ) -18 -19 dbm overload (ber=10 -10 ) 0 1 dbm output offset voltage 3.0 volts output return loss (s22), 100khz-8 ghz 8 10 db tia supply current 100 120 ma tia power dissipation 800 960 mw optical return loss -27 db pin description 1 +vpd 2 case gnd 3 +vdd 4 gnd 5 gnd 6 gnd 7 gnd 8 n/c k con. o/p test conditions: t=22 c, v pd = 8 volts, v dd = 8 volts, r l = 50 ohms ac. limits applicable at 22 c (case temperature). note: consult perkinelmer optoelectronics for typical performance characteristics over the operating temperature range. unit: mm (nominal) optical fiber pigtail length (1000 ?m min) connector 04.191
srap10 figure 2. typical connection circuitry maximum ratings supply voltage (v dd ) 8.5 volts detector voltage (v pd ) 15 volts optical power 1.25 mw fiber bend radius 30 mm min. operating case temp. 0/70 c storage temperature -40/85 c ordering guide 01-003:051201/3 www.perkinelmer.com/opto 2001 perkinelmer inc. all rights reserved. canada: perkinelmer optoelectronics 22001 dumberry road vaudreuil, qu?bec, j7v-8p7 canada phone: (450) 424-3300 fax: (514) 693-2210 europe: perkinelmer optoelectronics gmbh wenzel-jaksch-str.31 65199 wiesbaden phone: +49 611 492 534 fax: +49 611 492 578 asia: perkinelmer optoelectronics 47 ayer rajah crescent #06-12 singapore 139947 phone: +65 775 2022 fax: 65 775 1008 usa: perkinelmer optoelectronics 44370 christy street fremont, ca 94538-3180 phone: (510) 979-6500 fax: (510) 687-1152 perkinelmer optoelectronics reserves the right to change or amend specifications and/or configurations at any time without notice. generic device type: srap10-cc connector type ( cc ): fc : fc connector sc : sc connector fiber type (core/cladding/buffer) ( ff ): 09 : 9/125/900 ?
|
