20.0-38.0 ghz gaas mmic low noise amplifier, 3x3mm qfn 17.0 db small signal gain 3.0 db noise figure single, positive bias supply 3x3mm qfn package 100% rf tested features absolute maximum ratings supply voltage (vd) supply current (id1,2,3) input power (pin) storage temperature (tstg) operating temperature (ta) channel temperature (tch) +7.0 vdc 70 ma +12.0 dbm -65 to +165 o c -55 to mttf graph 1 mttf graph 1 page 1 of 5 (1) channel temperature affects a device's mttf. it is recommended to keep channel temperature as low as possible for maximum life. electrical characteristics (ambient temperature t = 25 o c) parameter frequency range (f ) input return loss (s11) output return loss (s22) small signal gain (s21) gain flatness ( s21) reverse isolation (s12) noise figure (nf) output power for 1db compression (p1db) drain bias voltage (vd) supply current (id) units ghz db db db db db db dbm vdc ma min. 20.0 - - 15.0 1 - - - - 3.0 - typ. - 12.0 15.0 17.0 +/-2.0 45.0 3.0 6.0 4.0 45 max. 38.0 - - - - - - - 5.0 60 l1010-qt mimix broadbands three stage 20.0-38.0 ghz gaas mmic low noise amplifier has a small signal gain of 17.0 db with a noise figure of 3.0 db. the device comes in a rohs compliant, 3x3mm qfn package and requires only a single positive bias supply. the devices uses mimix broadbands gaas phemt device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. the device is well suited to multiple receiver applications which require broadband performance with simple bias requirements and the ease of volume manufacturing with 3x3mm qfn packaging. general description (1) specified over 24-36.5 ghz mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
low noise amplifier measurements page 2 of 5 20.0-38.0 ghz gaas mmic low noise amplifier, 3x3mm qfn l1010-qt xl1010-qt: input return loss vs. freq (ghz) -30 -25 -20 -15 -10 - 5 0 10 15 20 25 30 35 40 freq (g hz) db|s11| , vdd=3 , vdd=4 , vdd=5 xl1010-qt: small signal gain vs. freq (ghz) 0 5 10 15 20 25 10 15 20 25 30 35 40 freq (gh z ) db|s21| , vdd=3 , vdd=4 , vdd=5 xl1010-qt: reverse isolation vs. freq (ghz) -60 -50 -40 -30 -20 -10 0 10 15 20 25 30 35 40 freq (g hz) db|s12| , v d d=3 , v d d=4 , v d d=5 xl1010-qt: output return loss vs. freq (ghz) -30 -25 -20 -15 -10 - 5 0 10 15 20 25 30 35 40 freq (g hz) db|s22| , vdd=3 , vdd=4 , vdd=5 xl1010-qt: noise figure (db) vs. frequency (ghz) 0 1 2 3 4 5 6 7 8 9 10 1 8 2 0 2 2 24 26 28 30 32 34 36 38 40 f r equ ency (g hz ) no ise figure (db) xl1010-qt: p1db vs freq 5v and 52ma 0 2 4 6 8 10 12 14 16 20 2 2 24 26 28 30 32 34 36 38 40 freq (ghz) p1db (dbm) mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
package dimensions/layout functional block diagram/board layout page 3 of 5 20.0-38.0 ghz gaas mmic low noise amplifier, 3x3mm qfn l1010-qt pin designations pin number 1 2 3 4-9 10 11 12 13 14-16 pin name gnd rf in gnd nc gnd rf out gnd vd nc pin function ground rf input ground not connected ground rf output ground drain bias not connected nominal value 4v, 45 ma ground 1 2 3 4 1 6 1 5 1 4 1 3 1 2 1 1 1 0 9 5 6 7 8 rf i n n c rf out n c gn d n c n c n c gn d gn d n c n c n c v d gn d n c mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
page 4 of 5 app note [1] biasing - the device is operated with a single, positive bias supply. the device performance is insensitive to changes in bias condition; however, gain and power handling can be slightly improved with higher bias conditions without significantly affecting the noise figure performance. typical biasing conditions within the specified performance ranges are vd=3v, 35ma, vd=4v, 45ma, vd=5v, 55ma. 20.0-38.0 ghz gaas mmic low noise amplifier, 3x3mm qfn l1010-qt recommended board layout (dxf file available from website) rf in rf out vd mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
page 5 of 5 20.0-38.0 ghz gaas mmic low noise amplifier, 3x3mm qfn l1010-qt life support policy - mimix broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the president and general counsel of mimix broadband. as used herein: (1) life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. package attachment - this packaged product from mimix broadband is provided as a rugged surface mount package compatible with high volume solder installation. vacuum tools or other suitable pick and place equipment may be used to pick and place this part. care should be taken to ensure that there are no voids or gaps in the solder connection so that good rf, dc and ground connections are maintained. voids or gaps can eventually lead not only to rf performance degradation, but reduced reliability and life of the product due to thermal stress. mimix lead-free rohs compliant program - mimix has an active program in place to meet customer and governmental requirements for eliminating lead (pb) and other environmentally hazardous materials from our products. all mimix rohs compliant components are form, fit and functional replacements for their non-rohs equivalents. lead plating of our rohs compliant parts is 100% matte tin (sn) over copper alloy and is backwards compatible with current standard snpb low-temperature reflow processes as well as higher temperature (260c reflow) pb free processes. part number for ordering description xl1010-qt-0g00 matte tin plated rohs compliant 3x3 16l qfn surface mount package in bulk quantity xl1010-qt-0g0t matte tin plated rohs compliant 3x3 16l qfn surface mount package in tape and reel xl1010-qt-ev1 xl1010-qt evaluation board handling and assembly information caution! - mimix broadband mmic products contain gallium arsenide (gaas) which can be hazardous to the human body and the environment. for safety, observe the following procedures: ? do not ingest. ? do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by- products are dangerous to the human body if inhaled, ingested, or swallowed. ? observe government laws and company regulations when discarding this product. this product must be discarded in accordance with methods specified by applicable hazardous waste procedures. typical reflow profiles reflow profile ramp up rate activation time and temperature time above melting point max peak temperature time within 5 oc of peak ramp down rate snpb 3-4 oc/sec 60-120 sec @ 140-160 oc 60-150 sec 240 oc 10-20 sec 4-6 oc/sec pb free 3-4 oc/sec 60-180 sec @ 170-200 oc 60-150 sec 265 oc 10-20 sec 4-6 oc/sec factory automation and identification mimix designator -qt package type qfn (3x3mm) p 1 component pitch 8mm p 0 hole pitch 4mm w tape width 12mm number of leads offered 16 reel diameter 329mm (13in) units per reel 2000 component orientation: parts are to be oriented with the pin 1 closest to the tape's r ound sprocket holes on the tapes trailing edge. note: tape and reel packaging is ordered with a -000t suffix. package is available in 500 unit reels through designated sales channels. minimum order quantities should be discussed with your local sales representative. ordering information c a u t i o n : e s d s e n s i t i ve appropriate precautions in handling, packaging and testing devices must be observed. proper esd procedures should be followed when handling this device. mimix broadband, inc., 10795 rockley rd., houston, texas 77099 tel: 281.988.4600 fax: 281.988.4615 mimixbroadband.com characteristic data and specifications are subject to change without notice. ? 2010 mimix broadband, inc. export of this item may require appropriate export licensing from the u.s. government. in purchasing these parts, u.s. domestic customers accept their obligation to be compliant with u.s. export laws. march 2010 - rev 13-mar-10
|
