rpl & rp construction rpl series rp series 1. terminal plating by gold gives excellent results when soldering. 2. rpl series (raised actuator) and rp series (recessed actuator) 3. low contact resistance, and self-clean on contact area. 4. double contacts offer high reliability. 5. all materials are ul94v-0 grade fire retardant plastics. item description materials treatment 1 actuator ul94v-0 pbt white 2 cover ul94v-0 pbt blue, red, black 3 base ul94v-0 pbt black 4 terminal phosphor bronze gold plating 5 potting epoxy black p.c.b. layout
model prod no. no. of pos dim a rpl/rp-02 02 6.26 0.246 rpl/rp-03 03 9.06 0.357 rpl/rp-04 04 11.34 0.446 rpl/RP-05 05 13.88 0.546 rpl/rp-06 06 16.42 0.646 rpl/rp-08 08 21.5 0.846 rpl/rp-10 10 26.58 1.046 rpl/rp-12 12 31.60 1.244 how to order example: rpl-08-b-t is a piano type dip switch, long key, 8 position with top tape sealed. packing all dip switches are shipped in standard ic tubes with all poles in "off" position. circuit diagram terminal type specification electrical electrical life: 2000 operation cycles per switch 24vdc, 25ma. non-switching rating: 100ma, 50 vdc switching rating: 25ma, 24vcd. contact resistance: (a) 50m ? ? ?
wave soldering: recommended solder temperature at 500 f (260 c) max. 5 seconds. hand soldering: use a soldering iron of 30 watts, controlled at 608 f(320 c) approximately 2 seconds while applying solder. cleaning process: flux clean using force rinse, high agitation or triple bath cleaning method. freon tf or te give excellent results. when vapor methods are used, do not subject the switch to solvents at temperatures above 125 f (51 c).
|
