View 67-22-G3G3C-B45-2T_1791230.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 1 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa features ? p-lcc-4 package ? optical indicator ? colorless clear window ? ideal for ba cklight and light pipe application ? inter reflector ? wide viewing a ng le ? suitable for vapor- pha se reflow, infrared reflow and wave solder processes. ? computable with automatic placement equipment ? available on tape and reel (8mm tape) ? pb-free ? the product itself will remain within rohs compliant version descriptions ? the 67-22 series is available in soft orange , green,blue and yellow. due to the package design, the led has wide viewing angle and op timized light coupling by inter reflector. this feature makes ideal for light pipe appli cation. the low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. applications ? telecommunication: indicator and backlighting in telephone and fax ? flat backlight for lcd?s, switches and symbols ? light pipe application ? general use device selection guide chip type material emitted color resin color g3 gap pale green g3 gap pale green water clear
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 2 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa package dimensions note: the tolerance unless mentioned is 0.1mm. 0.80.1 2.2 1.8 1.6 1.8 for reflow soldering(propose) c l 0.7 1 2 3 4 1 2 3 4 0.70.1 2.20.1 2.80.2 3.50.2 3.20.2 2.40.1 2.80.2 2.70.2 0.50.1 0.150.05 1.90.2 0.80.1 yellow red green chip1 green chip2
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 3 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa absolute maximum ratings (ta=25 ) parameter symbol rating unit reverse voltage v r 5 v g3 forward current i f g3 30 ma g3 peak forward current (duty 1/10 @ 1khz) i fp g3 60 ma g3 power dissipation pd g3 100 mw operating temperature topr -40 ~ +85 storage temperature tstg -40~ +90 soldering temperature tsol reflow soldering 260 for 10 sec. hand soldering 350 for 3 sec.
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 4 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa electro-optical characteristics (ta=25 ) parameter symbol min. typ. max. unit condition g3 luminous intensity i v g3 4.5 10.0 36.0 mcd viewing angle 2 1/2 ----- 120 ----- deg g3 peak wavelength p g3 ----- 565 ----- nm g3 dominant wavelength d g3 563.5 ----- 571.5 nm g3 spectrum radiation bandwidth g3 ----- 30 ----- nm g3 forward voltage v f g3 1.7 2.0 2.4 v i f =10ma g3 reverse current i r g3 ----- ----- 10 a v r =5v notes: 1. tolerance of luminous intensity 11% 2. tolerance of dominant wavelength 1nm 3. tolerance of forward voltage 0.1v
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 5 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa bin range of dominant wavelength chip bin code min. max. unit condition c13 563.5 565.5 c14 565.5 567.5 c15 567.5 569.5 g3 c16 569.5 571.5 nm i f =10ma notes: 1. tolerance of dominant wavelength: 1nm
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 6 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa typical electro-optical characteristics curve ambient temperature t (c) -60 1 10 -20 -40 0 20 60 40 a 100 80 100 1000 relative luminous intensity vs. ambient temperature 550 25 0 50 75 100 wavelength (nm) 600 650 700 500 ta=25c spectrum distribution forward current derating curve 0 forward voltage v (v) f 1.6 0 10 20 30 40 50 forward voltage 2.4 2.0 1.8 2.2 2.6 ta=25c forward current vs. 10 10 relative luminous intensity (%) 1 100 1000 forward current i (ma) 0 1 10 2 10 f 3 10 relative luminous intensity vs. ta=25c f = 1 k h z d u t y = 1 / 1 0 forward current relative luminous intensity (%) relative luminous intensity (%) forward current i (ma) f forward current i (ma) f 10 20 30 40 ta=25c radiation diagram 0.7 0.8 0.9 1.0 80 90 50 60 70 40 0 10 20 30
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 7 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerance unless mentioned is 0.1mm. msl-4
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 8 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa carrier tape dimensions: loaded quantity 2000 pcs. per reel note: the tolerance unless mentioned is 0.1mm. moisture resistant packaging aluminum moistue-proof bag label desiccant label
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 9 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 10sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 10 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 /85%rh. 1000 hrs. 22 pcs. 0/1
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 10 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life are 72 hours under 30 or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 120 sec. max. 1~5 c / sec. pre-heating 180~200c 60 sec. max. above 220c 260 c ma x 1~5 c / sec. 10 sec. max.
technical data sheet top view leds 67-22/g3g3c-b45/2t everlight electronics co., ltd. http://www. everlight.com rev. 3 page 11 of 11 device no. dse-0000324 prepared date 22-dec-2008 prepared by teresa 4. soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capac ity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful becau se the damage of the product is often started at the time of the hand solder. 5. repairing repair should not be done after the leds have b een soldered. when repairing is unavoidable, a double-head soldering iron should be used (as be low figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 67-22-G3G3C-B45-2T

	To Download 67-22-G3G3C-B45-2T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .