ge sensing general purpose sensors is a thermometrics product. thermometrics has joined other ge high-technology sensing businesses under a new namege industrial, sensing. g uncoated disc with radial leads features ? low cost solid state sensor ? resistance tolerances down to 2% ? high sensitivity to changes in temperature ? suitable for temperature measurement, control and compensation ? excellent mechanical strength ? wide operating temperature range: -58f to 302f (-50c to 150c) ? suitable for pcb and probe mountings ? available in a wide range of material systems ? also available with epoxy coating ? available on tape and reel to eia rs-468a for automatic insertion description point-matched disc thermistor with bare lead-wires. ntc thermistors type rl20
ge sensing type rl20 specifications g ?2007 ge. all rights reserved. 920-413a all specifications are subject to change for product improvement without notice. ge ? is a registered trademark of general electric co. other company or product names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with ge. www.gesensing.com options ? other resistances and tolerances at other temperatures available. ? resistances tolerance codes: g = 2% C j = 5% C k = 10% C l = 15% C m = 20% ? alternative lead lengths, lead materials, insulations ? the - k suffix is the same as the di suffix in earlier catalogs. type number ro@25c material beta b rl2004-16.4-59-m 25 d5.9 3096 .130 3.30 6.5 20 rl2007-32.8-59-m 50 d5.9 3096 .160 4.06 6.5 30 rl2003-62.4-73-k 100 d7.3 3468 .120 3.05 6.5 20 rl2004-93.6-73-k 150 d7.3 3468 .130 3.30 6.5 20 rl2004-89.1-85-k 150 d8.5 3772 .130 3.30 6.5 20 rl2006-125-73-k 200 d7.3 3468 .150 3.81 6.5 20 rl2006-119-85-k 200 d8.5 3772 .150 3.81 6.5 20 rl2007-156-73-k 250 d7.3 3468 .160 4.06 6.5 30 rl2008-187-73-k 300 d7.3 3468 .170 4.32 6.5 30 rl2008-178-85-k 300 d8.5 3772 .170 4.32 6.5 30 rl2003-289-95-k 500 d9.5 3965 .120 3.05 6.5 20 rl2005-434-95-k 750 d9.5 3965 .140 3.56 6.5 20 rl2006-578-95-k 1k d9.5 3965 .150 3.81 6.5 20 rl2004-582-97-k 1k d9.7a 3972 .130 3.30 6.5 20 rl2006-873-97-k 1.5k d9.7a 3972 .150 3.81 6.5 20 rl2007-1164-97-k 2k d9.7a 3972 .160 4.06 6.5 30 rl2005-1148-103-k 2k d10.3 4073 .140 3.56 6.5 20 rl2006-1600-103-k 2786 d10.3 4073 .150 3.81 6.5 20 rl2008-2010-103-k 3.5k d10.3 4073 .170 4.32 6.5 30 rl2005-2203-120-k 4k d12.0 4356 .140 3.56 6.5 20 rl2006-2753-120-k 5k d12.0 4356 .150 3.81 6.5 20 type number ro@25c material beta b rl2008-4131-120-k 7.5k d12.0 4356 .170 4.32 6.5 30 rl2004-4429-122-k 8k d12.2 4365 .130 3.30 6.5 20 rl2012-5506-120-k 10k d12.0 4356 .210 5.33 7.2 50 rl2005-5536-122-k 10k d12.2 4365 .140 3.56 6.5 20 rl2007-8304-122-k 15k d12.2 4365 .160 4.06 6.5 30 rl2010-11k-122-k 20k d12.2 4365 .190 4.83 7.0 35 rl2005-10.7k-140-k 20k d14.0 4615 .140 3.56 6.5 20 rl2003-13.2k-150-k 25k d15.0 4728 .120 3.05 6.5 20 rl2006-13.3k-140-k 25k d14.0 4615 .150 3.81 6.5 20 rl2007-16k-140-k 30k d14.0 4615 .160 4.06 6.5 30 rl2004-18.4-150-k 35k d15.0 4720 .130 3.30 6.5 20 rl2004-21.6k-138-k 40k d13.8 4561 .130 3.30 6.5 20 rl2005-27k-138-k 50k d13.8 4561 .140 3.56 6.5 20 rl2006-26.3k-150-k 50k d15.0 4720 .150 3.81 6.5 20 rl2004-26k-155-k 50k d15.5 4783 .130 3.30 6.5 20 rl2008-39.6k-150-k 70k d15.0 4220 .170 4.32 6.5 30 rl2007-40.6k-138-k 75k d13.8 4561 .160 4.06 6.5 30 rl2007-44.5k-155-k 85k d15.5 4783 .160 4.06 6.5 30 rl2010-54.1k-138-k 100k d13.8 4561 .190 4.83 7.0 35 rl2008-52.3k-155-k 100k d15.5 4783 .170 4.32 6.5 30 0.220 in max (5.6 mm) 0.156 in (4 mm) 1.5 in (38 mm) min b thickness refer to table 26 awg tinned copper
|
