View 4100400_1717663.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1-1 chapter - page calipers vernier calipers 1- 2 digital calipers 1- 4 digital universal calipers 25 es 1- 6 digital height gauge 27 es 1- 11 depth gauge 30 n 1- 12 digital depth gauge 1- 13 digital linear machine scale 1- 15 micrometers precision micrometers 1- 18 micrometers with dial comparators 1 - 21 bench micrometers 40 ts 1- 23 accessories for precision micrometers 1 - 24 inside micrometers 1- 26 self-centering inside micrometers 1 - 28 self-centering digital inside micrometers 44 ye 1 - 29 accessories for inside micrometers 1 - 30 depth micrometer 45 t 1- 31 micrometer head 46 1- 32
1-2 75 x 7 calipers vernier calipers 16 n, 16 fn, 16 dn with scale reading accessories features ? vernier and main scale with satin-chrome finish for glare- free reading ? slide and beam made of hardened stainless steel ? raised sliding surfaces for protection of the scale ? measuring blades for inside measurement ? step measuring function ? depth bar ? locking screw resp. thumb clamp ? standard accessories: plastic case and thread schedule measuring readings error limit order no. remarks range (din 862) mm (inch) mm / inch mm 16 n 150 (6) 0,05 / 1 / 128 0,05 4100500 locking screw below 16 fn 150 (6) 0,05 / 1 / 128 0,05 4100400 locking screw top 16 dn 150 (6) 0,05 / 1 / 128 0,05 4100600 thumb clamp technical data order no. depth measuring bridge 16 em 41 02020 leather case 4100302 16,5 40 10 234 16 x 3 4 16 fn 16 dn
1-3 vernier caliper 16 u with circular scale technical data measuring readings diameter of error limit order no. range circular scale (din 862) 16 u 150 mm 0,02 mm 34 mm 0,03 mm 4107000 6 .001 1.3 .0012 4107900 ? zero setting through swivelling dial and locking screw ? covered rack ? slide and beam made of hardened stainless steel ? large dial face with high contrast ? satin-chrome finished line scale ? shockproof movement calipers features ? measuring blades for inside measurement ? step measuring function ? locking screw ? depth bar 75 x 7 accessories order no. depth measuring bridge 16 em 41 02020 16,5 40 10 234 16x3 7 ? standard accessory: plastic case
1-4 75 x 7 16 es 16 es/tin digital calipers 16 es and 16 es/tin accessories features ? functions : on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output: opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? slide and beam made of hardened stainless steel ? measuring blades for inside measurement measuring resolution error limit order no. remarks range (din 862) mm (inch) mm / inch mm (inch) 16 es 150 (6) 0,01 / .0005 0,03 (.0015) 4102500 16 es/tin 150 (6) 0,01 / .0005 0,03 (.0015) 4102525 titanium-nitride (tin) coating 16 es 200 (8) 0,01 / .0005 0,03 (.0015) 4102501 technical data dimensions mm a b c d e 16 es 150 mm 233 40 10 16 16 x 3 200 mm 283 40 10 16 16 x 3 ? step measuring function ? depth bar ? locking screw ? standard accessory: plastic case and battery order no. leather case for caliper 150 mm 4102002 depth measuring bridge 16 em 41 02020 battery 3v, type cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 accessories for data processing see chapter 9 calipers a b d c e 4 mahr 16 es ref mm/in on/off 0 hold
1-5 digital caliper 18 es 18 es technical data measuring range resolution error limit order no. remarks (din 862) mm (inch) mm / inch mm (inch) 300 (12) 0,01 / .0005 0,03 (.0015) 4112600 incl. case 500 (20) 0,01 / .0005 0,03 (.0015) 4112601 1000 (40) 0,01 / .0005 0,04 (.002) 4112602 ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output: opto rs232c via data connecting cable ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) ? high contrast 6 mm liquid crystal display ? slide and beam made of hardened stainless steel ? sharp edge jaws for outside dimensions calipers accessories features ? round measuring faces for measurement of inside diameter ? locking screw ? fine adjustment ? standard accessory: battery dimensions mm a b c d e f 18 es 300 mm 5 10 90 40 410 20 x 5 500 mm 10 19 125 60 675 25 x 6 1000 mm 10 19 125 65 1200 30 x 7 order no. battery 3v, typ cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 wooden case, measuring range 500 mm 4103042 wooden case, measuring range 1000 mm 4103043 accessories for data processing see chapter 9 18 es reset ref mm/inch on/off 0 hold mahr e b d a c f
1-6 accessories order no. checking gauge, hardened steel, to be screwed in wooden case 25 eel 4118520 battery 3v, typ cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 accessories for data processing see chapter 9 digital universal caliper 25 es varimeter technical data ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring values) data (data transmission) preset (set buttons can be used to enter any numerical value) tol (tolerance display) features ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output: opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? interchangeable measuring arms ? due to the patented mounting of all measuring components on upper or lower longitudinal edge of arm holders, digital display is always readable from the users side ? arms are reversible for extending measuring range ? both arm holders can be measuring range* resolution error limit weight order no. order no. outside inside (din 862) wooden case mm (inch) mm (inch) mm/inch mm (inch) g 0-300 (0-12) 25-325 (1-13) 0,01 /.0005 0,03 (.0015) 770 4118700 4118750 0-300 (0-12) 25-325 (1-13) 0,01 /.0005 0,03 (.0015) 750 4118701** 4118750 0-600 (0-24) 25-625 (1-25) 0,01 /.0005 0,03 (.0015) 1050 4118702 4118751 0-1000 (0-40) 25-1025 (1-41) 0,01 /.0005 0,04 (.002) 1470 4118703 4118752 * related to accessories; 75 mm (3) extension of measuring range by reversible measuring arms 844 te / tx * * without fine adjustment calipers application for measurement of ? outside and inside dimensions ? registers ? narrow collars ? external and internal tapers ? dovetails ? grooves moved on beam, thus well- balanced distribution of weight on small dimensions ? slide and beam made of hardened stainless steel ? standard accessory: battery ? distances between hole- centers ? external and internal threads (see chapter 7) ? external and internal serrations (see chapter 8) for scribing of workpieces 25 0,003 10 25 50 0,003 90 25 eel illustration with accessories
1-7 844 tm 844 te 844 tw 844 tx 844 ta 844 ti 844 tu 844 tt 844 tv 844 tz 844 tb 844 tc 25 eb 25 es 25 eh 912 911 h 907 h 908 h 904 h 906 h 901 h 903 h 902 h 913 844 tp 844 ts 844 tk 844 tr 844 tg 426 m dimensions mm a 25 es 300 mm 475 600 mm 775 1000 mm 1175 digital universal caliper 25 es measuring arms, mounting attachments and anvils calipers 25es reset ref mm/inch on/off 0 hold 9 ? 5 h7 d min 6 ? 3,5 (m2,5) 4 12 18,5 24,5x5,6 18,3 8 41,5 844 te/ 844 tx 844 tm d min = 14 mm (844 te/tx, 25 mm) d min = 17 mm (844 te/tx, 50 mm) a remark: measuring anvils 844 tr / tg / tv see chapter 7 measuring anvils 844 tk / tz see chapter 8
1-8 measuring arms, stops and mounting attachments for digital universal caliper 25 es calipers measuring arms 844 te ? for outside and inside measurements ? with bore dia. 3,5 mm for accommodation of interchangeable anvils 844 ts, 844 tp, 844 tk, 844 tr and 844 tg ? reversible on arm holders for extending measuring range throat depth a mm 25 50 order no. 4500020 4500021 anvils for measuring arms 844 te ? hardened steel ? with cylindrical shank and retainer ring which ensures positive locking, yet allows free rotation inside the bore of arms 844 te stops 844 tw ? limit measuring depth. to be mounted on measuring arms 844 te. reversible for inside and outside measurements. order no. 4500109 mounting attachments 844 tm ? accommodates interchangeable anvils 844 ta, 844 ti, 844 tu, 844 tt, 844 tb, 844 tc, 844 tr as well as cylindrical measuring pins 844 tz ? faces may be used as stops ? reversible on arm holders for extending measuring range order no. 4500030 cat. no. order no. 844 tp flat, for outside diameters, distances and widths 4500040 844 ts spherical, for inside diameters 4500045 anvils for outside and inside measurements with digital universal caliper 25 es shoulder anvils for mounting attachments 844 tm ? made of hardened steel ? for measuring narrow collars, registers and similar features ? with cylindrical shank fitting into bore of interchangeable arms 844 tm cat. no. order no. 844 ta flat, for outside diameters 4500050 844 ti semi-cylindrical, for inside diameters 4500055 scribing with digital universal caliper 25 es scriber point 25 es ? for straight lines and circles ? made of hardened steel order no. 411 8530 counter holder 25 eh ? for scribing straight lines in connection with 25 es; for example along edges ? made of hardened steel order no. 411 8535 13 844 ta ?5 5 5 5 5 13 ?5 844 ti 6 3 ? 7, 5 844 tp ? 3,5 25 es 17 10 844 tw 844 te a ? 7, 5 63 844 ts ? 3,5 25 eh 844 tm
1-9 calipers roller anvils 844 tu* for measuring arms ? for measuring diameter of outside tapers and dovetail guides ? roller made of hardened steel cat. no. order no. 844 tu* roller dia. 8 mm 4500047 roller length 14 mm distance of roller to taper face 5 mm 3 m anvils for tapers and distances for digital universal caliper 25 es ball anvils 844 tt* for inside tapers ? for measuring diameter on inside tapers at 5 mm from taper face ? ball made of hardened steel cat . no. order no. 844 tt* ball dia. 8 mm 4500046 distance of ball to taper face 5 mm 3 m * for inside and outside surfaces that are parallel to each other, combination sets consisting of one roller anvil 844 tu and one ball anvil 844 tt are recommended. anvils for recesses for digital universal caliper 25 es ? for measuring registers and recesses on inside and outside diameters. each unit consists of a pin type holder and a mounted measuring blade. the holder is length adjustable in mounting attachment 844 tm and serves for setting the measuring depth ? the face of the mounting attachment 844 tm serves as stop. catalog blades regulating order no. no. length ? ranges mm mm mm 844 tb C9 0 C10 4500015 844 tc 20 C 0 C 10 4500114 20 C 40 C 50 4500115 anvils for distances for digital universal caliper 25 es measuring inserts 25 eb ? for distances between hole centers and between hole centers and edges ? carbide tipped ? longest distance between hole centers corresponds with half the measuring range order no. 411 8525 2 1 9 0-10 ?5 844 tb 5 5 ?8 ?5 844 tu 5 5 ?8 844 tt ?5 844 tc ?5 0-10 40-50 20 6 7, 5 7, 5 25 eb 2,5 ?5 ?1,5 33 measuring units with measuring blades for mounting attachments 844 tm 844 tb ? with round measuring blades ? recommended for recesses up to 2 mm depth 844 tc ? with long measuring blades ? recommended for recesses up to 7,5 mm depth
1-10 measuring arms 844 tx and corresponding anvils for digital universal caliper 25 es calipers measuring spindle extensions 912 length l order length l order mm no. mm no. 10 4360250 35 4360254 15 4360251 50 4360255 20 4360252 75 4360256 25 4360253 100 4360257 ball contact points 906 h with carbide ball, accuracy ball dia. 0/- 6 m ball dia. d order ball dia. d order mm no. mm no. 1 4360150 5,5 4360161 1,25 4360151 6 4360162 1,5 4360152 6,35 (1/4) 4360163 1,75 4360153 6,5 4360164 2 4360154 7 4360165 2,5 4360155 7,5 4360166 3 4360156 8 4360167 3,5 4360157 8,5 4360168 4 4360158 9 4360169 4,5 4360159 10 4360170 5 4360160 special contact points order no. conical contact point, carbide tipped 904 h 4360131 flat contact plates*, steel, a = 1 cm 2 907 4360200 carbide tipped, dia. 7 mm 907 h 4360201 spherical contact plates, steel 908 4360210 carbide tipped 908 h 4360211 pin-type contact point, carbide-tipped, 911 h 4360240 dia. 1 mm, flat flat contact point, for mounting 913 4360400 pin gauge holder 426 m for three wire thread measuring method * please note: when using flat-faced anvil, anvil on opposite side must be radiused. measuring arms 844 tx ? with thread size m 2,5 for screwing in interchangeable contact points ? for outside and inside dimensions on specially shaped workpieces 10 r 0,3 m 2,5 904 h 30 5 m 2,5 ? 11,3 907 h 5 m 2,5 908 h ? 12 r30 10 m 2,5 911 h ? 1 2 l m 2,5 912 m 2,5 5 m 2,5 913 ?7,5 426 m r 1,5 6 5 m 2,5 901 r 6 l m 2,5 902 ?4 m 2,5 903 l d m 2,5 906 h spherical contact points 902 flat contact points 903 902 902 h 903 903 h steel carbide tipped steel carbide contact face tipped length l order order order order mm no. no. no. no. 4 4360007 C 4360070 C 6 4360009 C 4360071 4360101 8 4360010 4360040 4360072 4360102 10 4360011 4360041 4360073 4360103 12 4360012 4360042 4360074 4360104 15 4360013 4360043 4360075 4360105 20 4360014 4360044 4360076 4360106 25 4360015 4360045 4360077 4360107 30 4360016 4360046 4360300 4360110 35 4360017 4360047 4360078 4360108 40 4360019 4360049 4360310 4360111 45 4360026 4360050 4360303 C 50 4360018 4360048 4360079 4360109 55 4360031 65 4360035 75 4360020 85 4360036 95 4360029 throat depth a mm 25 50 order no. 4500080 4500081 standard contact points 901 ball dia. 3 mm cat. no. order no. 901 steel ball 4360001 901 h carbide ball 4360002 901 r ruby ball 4360003 m 2,5 a 844 tx
1-11 c d b a 27 es ref on/off mm/inch reset digital height gauge 27 es features application ? scribing and marking of workpieces ? measurement of heights and distances ? ? ? ? ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) preset (set buttons can be used to enter any numerical value) ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output: opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? heavy-duty base, easy to handle ? hardened and lapped contact surface to produce smooth and even movement ? slide and beam made of hardened stainless steel ? fine adjustment ? locking screw ? interchangeable scriber point, carbide-tipped ? standard accessories: scriber point and battery technical data measuring resolution error limit weight order no. order no. remarks range (din 862) wooden case mm (inch) mm/inch mm (inch) kg 300 (12) 0,01 /.0005 0,03 (.0015) 6,7 4123700 4123530 incl. scriber point 27 esh 600 (24) 0,01 /.0005 0,03 (.0015) 7,6 4123701 4123531 incl. scriber point 27 esh dimensions mm a b c d 27 es 300 mm 41 190 x 130 24 x 12 475 600 mm 41 190 x 130 24 x 12 775 calipers accessories order no. scriber point, carbide-tipped 27 esh 4123710 holder for test indicators 27 sp 4123041 battery 3v, type cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 accessories for data processing see chapter 9 ?8 11,5x7 27 sp 71 65 42 15 11,5x7 27 esh
1-12 depth gauge 30 n calipers ? vernier and main scale with satin-chrome finish for glare- free reading ? slide, beam and cross beam made of hardened stainless steel ? raised sliding surfaces for protection of the scale ? locking screw features dimensions mm l 30 n 300 mm 382 500 mm 582 technical data measuring v ernier error limit order no. remarks range scale (din 862) mm mm mm 100 0,05 0,05 4127200 with hardened measuring pin and measuring face (change of beam) 300 0,05 0,05 4127201 500 0,05 0,07 4127202 4,5 160 8x4,5 6 ?1 50 l 12x4 6 150 30 n (300/500 mm) 30 n (100 mm) ? standard accessory: plastic case (measuring range 100 mm and 300 mm)
1-13 digital depth gauge 30 es features calipers ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output : opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? slide, beam and cross beam made of hardened stainless steel ? locking screw ? interchangeable measuring pin, hardened ? standard accessories: battery and case (only measuring range 300 mm) mahr ref mm/inch on/off 0 hold reset 30 es c a b 15 61,5 d e dimensions mm a b c d e 30 es 300 mm ? 1,5 5 150 x 8,5 370 12 x 4 500 mm ? 1,5 5 150 x 8,5 570 12 x 4 accessories order no. anvil for distance measurement for fixing to measuring pin 30 esa 4125611 long cross beam movable over 150 mm 30 esm 4125610 battery 3v, type cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 wooden case for measuring range 500 m 4103042 accessories for data processing see chapter 9 technical data measuring resolution error limit order no. range (din 862) mm (inch) mm/inch mm (inch) 300 (12) 0,01 /.0005 0,03 (.0015) 4125600 500 (20) 0,01 /.0005 0,03 (.0015) 4125601 distance measurement depth measurement mahr ref mm/inch on/off 0 hold reset 30 es 30 esm 300 mahr mahr ref mm/inch on/off 0 hold reset 30 es 30 esa mahr
1-14 calipers digital depth gauge 30 en features ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) preset (set buttons can be used to enter any numerical value) tol (tolerance display) ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output: opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? slide, beam and cross beam made of hardened stainless steel ? locking screw ? interchangeable anvil (m 2,5) ? standard accessories: anvils ( 30 ent 1 mm, 903 4 mm, 902 4 mm), battery and case accessories order no. flat contact point 903 4360070 spherical contact point 902 4360007 disc-type anvil 1 mm, hardened 30 ent 4882022 disc-type anvil 0,5 mm, hardened 30 ent 4126310 battery 3v, type cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 accessories for data processing see chapter 9 technical data measuring resolution error limit order no. remarks range (din 862) mm (inch) mm/inch mm (inch) 100 (4) 0,01 / .0005 0,02 (.0008) 4126300 incl. anvils 30 ent, 902, 903 ?7,5 m 2,5 30 ent 1 (0,5) 4 902/903 30 ent mahr ref mm/inch on/off 0 hold reset 30 en 16 x 3 16 3 85 x 8,5 268 ?4 r 6 4 m 2,5 902 ?4 m 2,5 903 4
1-15 ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) ? preset (set buttons can be used to enter any numerical value) for instruments with a resolution of 0,001 mm ? capacitive measuring system, life of battery approx. 2 years ? max. measuring speed 1,5 m/s (60/s) ? data output: opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? slide and beam made of hardened stainless steel ? standard accessory: battery features digital linear machine scales 31 es/32 es application ? measurement of travels at machines (for example upright drilling machines, milling machines) calipers accessories order no. drive-type device for instruments with resolution 0,001mm 31 esm 4102660 battery 3v, type cr 2032 4102520 data connecting cable rs232c (2 m), sub-d-jack 9-pin 16 esv 4102510 accessories for data processing see chapter 9 32 es 100 (4) 0,01 /.0005 0,02 (.0008) 4102620 vertical 150 (6) 0,01 /.0005 0,03 (.0015) 4102621 display 200 (8) 0,01 /.0005 0,03 (.0015) 4102622 125 (5) 0,001 /.00005 0,012 (.0005) 4102630 175 (7) 0,001 /.00005 0,015 (.0006) 4102631 225 (9) 0,001 /.00005 0,018 (.0007) 4102632 325 (13) 0,001 /.00005 0,025 (.001) 4102633 technical data measuring resolution span of order no. range error mm (inch) mm / inch mm (inch) 31 es 100 (4) 0,01 /.0005 0,02 (.0008) 4102600 horizontal 150 (6) 0,01 /.0005 0,03 (.0015) 4102601 display 200 (8) 0,01 /.0005 0,03 (.0015) 4102602 100 (4) 0,001 /.00005 0,012 (.0005) 4102610 150 (6) 0,001 /.00005 0,015 (.0006) 4102611 200 (8) 0,001 /.00005 0,018 (.0007) 4102612 300 (12) 0,001 /.00005 0,025 (.001) 4102613 31 es 32 es
1-16 ?4,2 b 37 59 13,5 5 3,6 3 16 ?7,4 7 m3 35 10,3 a c 22 13 31 es ref mm/in on/off 0 hold mahr ?4,2 17,5 5 7 13,6 3 22 40 c 35 70 b a 16 7, 5 3,6 ?7,4 13 10,3 m3 32 es mahr ref mm/in on/off reset dimensions (mm) a b c 31/32 es 100 mm 197 185 209 150 mm 247 235 259 200 mm 298 286 310 31 es 32 es digital linear machine scales 31 es/32 es with resolution 0,01 mm ?4,5 17,5 0,5 9,5 8 6 13,5 6 3 m 2,5 15 ?3,2 3,5 37 c 78 70 88 b a 40 8 16 31 esm 32 es mahr ref mm/in on/off reset dimensions (mm) a b c 31 es 100 mm 197 183 209 150 mm 247 233 259 200 mm 298 284 310 300 mm 397 383 409 32 es 125 mm 232 219 245 175 mm 282 269 295 225 mm 332 319 345 325 mm 432 419 445 31 es 32 es digital linear machine scales 31 es/32 es with resolution 0,001 mm calipers m 2,5 ?4,5 15 ?3,2 3,5 37 37 59 68 78 b a c 14 0,5 9,5 8 6 13,5 6 3 16 8 31 esm 31 es ref mm/in on/off 0 hold mahr
1-17 micrometers
1-18 micrometers ? chromium-plated steel frame ? maximum stability (for measuring ranges 0-100 mm one piece frame and spindle guide) ? spindle and anvil made of stainless steel, carbide- tipped or ceramic measuring faces (40 sc) ? measuring spindle hardened throughout and ground ? scales with satin-chrome finish ? heat insulators ? ratchet stop with integrated coupler ? locking device ? standard accessory: case (measuring range 0-100 mm) range of order no. remarks application 0-100 mm 4133001 incl. wooden case, setting (4 micrometers) standards 25 mm and 75 mm 100-200 mm 4133005 incl. wooden case, setting (4 micrometers) standards 125 mm and 175 mm 0-4 4133010 incl. wooden case and setting (4 micrometers) standards 1 and 3 dimensions mm a b c d e 0 - 25 mm / 0-1 31 28 13 3,25 3 25 - 50 mm / 1-2 56 40 13 3,25 3 50 - 75 mm / 2-3 81 53 13 3,25 3 75 -100 mm / 3-4 106 65 13 3,25 3 100 - 125 mm 130 75,5 15 4 3,5 125 - 150 mm 155 88 15 4 3,5 150 - 175 mm 180 100,5 15 4 3,5 175 - 200 mm 205 113 15 4 3,5 features technical data micrometer sets 40 ssh stand, setting standards, wooden cases, etc. see page 1-24 accessories micrometers 40 sh / sc 80 a e d c b 0 5 45 0 ?7,5 ?17,5 40 sh mahr measuring readings span of spindle order no. range error thread (din 863) pitch 40 sh 0-25 mm 0,01 mm 4 m 0,5 mm 4131000 25-50 mm 0,01 mm 4 m 0,5 mm 4131001 50-75 mm 0,01 mm 5 m 0,5 mm 4131002 75-100 mm 0,01 mm 5 m 0,5 mm 4131003 100-125 mm 0,01 mm 6 m 0,5 mm 4131004 125-150 mm 0,01 mm 6 m 0,5 mm 4131005 150-175 mm 0,01 mm 7 m 0,5 mm 4131006 175-200 mm 0,01 mm 7 m 0,5 mm 4131007 0-1 .0001 .00016 .025 4131900 1-2 .0001 .00016 .025 4131901 2-3 .0001 .0002 .025 4131902 3-4 .0001 .0002 .025 4131903 40 sc 0-25 mm 0,01 mm 4 m 0,5 mm 4131200 25-50 mm 0,01 mm 4 m 0,5 mm 4131201
1-19 micrometers ? can be read without error, because of 1 mm measuring span per rotation of thimble ? chromium-plated steel frame ? maximum stability (one piece frame and spindle guide) ? spindle and anvil made of stainless steel, carbide-tipped ? measuring spindle hardened throughout and ground features ? scales with satin-chrome finish ? heat insulators ? ratchet stop with integrated coupler ? locking device ? standard accessory: case technical data measuring readings span of error spindle order no. range f max thread (din 863) pitch mm mm m mm 0 - 25 0,01 4 1 4135000 25 - 50 0,01 4 1 4135001 50 - 75 0,01 5 1 4135002 75 - 100 0,01 5 1 4135003 precision micrometer 40 sd with extra-large thimble precision micrometer 40 sb with reduced measuring faces features ? scales with satin-chrome finish ? heat insulators ? ratchet stop with integrated coupler ? locking device ? standard accessory: case technical data measuring readings span of error spindle order no. range f max thread (din 863) pitch mm mm m mm 0 - 25 0,01 4 0,5 4140000 25 - 50 0,01 4 0,5 4140001 50 - 75 0,01 5 0,5 4140002 75 - 100 0,01 5 0,5 4140003 dimensions mm a b c d 0 - 25 mm 56 40 13 3,25 25 - 50 mm 81 53 13 3,25 50 - 75 mm 106 65 13 3,25 75 - 100 mm 130 75,5 15 4 80 a d c b 0 5 45 0 ?7,5 ?17,5 16 8 3 40 sb mahr dimensions same as 40 sh, but thimble dia. 25 mm stand, setting standards, etc. see page 1-24 accessories ? measuring faces reduced for measuring recesses and grooves ? extended anvil ? chromium-plated steel frame ? maximum stability (for measuring ranges 0 - 75 mm one piece frame and spindle guide) ? measuring spindle hardened throughout and ground
1-20 micrometers precision micrometer 40 sm with disc-type anvils features for measurements of ? tooth spans w k as of module 0,8 as indirect determination of tooth thickness on spur gears with straight and helical teeth (see din 3960) ? shoulders on shafts ? undercut dimensions ? registers ? soft materials such as rubber, cardboard, felt, etc. application ? scales with satin-chrome finish ? heat insulators ? ratchet stop with integrated coupler ? locking device ? standard accessory: case (measuring ranges 0-95 mm) dimensions mm a b c d e f 0 - 20 mm 31 28 13 3,25 4,5 25 20 - 45 mm 56 40 13 3,25 4,5 25 45 - 70 mm 81 53 13 3,25 4,5 25 70 - 95 mm 106 65 13 3,25 4,5 25 95 - 120 mm 130 75,5 15 4 4,5 30 120 - 145 mm 155 88 15 4 4,5 30 145 - 170 mm 180 100,5 15 4 4,5 30 170 - 195 mm 205 113 15 4 4,5 30 ? chromium-plated steel frame ? maximum stability (for measuring ranges 0-95 mm one piece frame and spindle- guide) ? measuring spindle hardened throughout and ground ? disc-type anvils hardened and lapped 80 a e d c b 0 5 45 ?17,5 f 40 sm 0,8 mahr w k stand, setting standards, wooden cases, etc. see page 1-24 accessories technical data measuring readings span of error spindle measuring faces order range f max thread no. (din 863) pitch flatness parallelism mm mm m mm m m 0 - 20 0,01 4 0,5 0,6 4 4145000 20 - 45 0,01 4 0,5 0,6 4 4145001 45 - 70 0,01 5 0,5 0,6 4 4145002 70 - 95 0,01 5 0,5 0,6 4 4145003 95 - 120 0,01 6 0,5 0,6 5 4145004 120 - 145 0,01 6 0,5 0,6 5 4145005 145 - 170 0,01 7 0,5 0,6 5 4145006 170 - 195 0,01 7 0,5 0,6 5 4145007
1-21 features micrometers micrometer with dial comparator 40 f / fc millimar application ? for rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) ? measurements of thickness and length ? recommended for standard precision parts ? steel frame chromium- plated with heat insulators ? maximum stability (one piece frame and spindle guide) ? retraction of the movable anvil and carbide-tipped measuring faces ensure maximum wear resistance ? ceramic measuring faces (40 fc), thus high wear resistance technical data dimensions (mm) a* b c d e 40 f/fc 0-25 mm (0-1) 149 100 16 71 32 25-50 mm (1-2) 174 125 30 85 56 * in zero position stand, setting standards, etc. see page 1-24 accessories 40 f/fc b a e ?7,5 5 c ?17,5 d mahr 0 5 45 ? measuring spindle made of stainless steel, hardened throughout and ground, lockable ? scales with satin-chrome finish ? constant measuring force ? dial comparator integrated into frame ? adjustable tolerance marks ? standard accessory: wooden case measuring retraction measuring faces measuring order no. remarks range flatness parallelism force 40 f 0-25 mm 1 mm 0,2 m 1 m 9 n 4150000 25-50 mm 1 mm 0,2 m 1 m 9 n 4150001 0-1 .04 .00001 .00005 9 n 4150900 1-2 .04 .00001 .00005 9 n 4150901 40 fc 0-25 mm 1 mm 0,2 m 1 m 9 n 4150200 ceramic measuring faces 25-50 mm 1 mm 0,2 m 1 m 9 n 4150201 ceramic measuring faces micrometer dial comparator readings span of spindle span of meas. readings error thread error f e range f me pitch (din 879) 0,01 mm 2 m 0,5 mm 1 m 65 m 1 m .0001 .00008 .025 .00005 .0025 .00005
1-22 micrometers micrometer with dial comparator 40 t application ? for rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) ? measurements of thickness and length ? recommended for standard precision parts stand, setting standards, etc. see page 1-24 accessories technical data measuring retraction measuring faces measuring order no. range flatness parallelism force 0 - 25 mm 1,2 mm 0,2 m 2 m 6,5 n 4154000 25 - 50 mm 1,2 mm 0,2 m 2 m 6,5 n 4154001 50 - 100 mm 1,2 mm 0,2 m 2 m 6,5 n 4154002 100 - 150 mm 1,2 mm 0,2 m 2 m 7,5 n 4154003 150 - 200 mm 1,2 mm 0,2 m 2 m 7,5 n 4154004 micrometer screw dial comparator 1003* readings span of spindle span of meas. readings error thread error f e range f me pitch (din 879) 0,01 mm 2 m 0,5 mm 1 m 50 m 1 m dimensions mm a** b c d** e 0 - 25 mm 27 28 4 11 8 25 - 50 mm 52 40 4 11 8 50 - 100 mm 76 65 5,5 30 8 100 - 150 mm 127 87 5,5 30 8 150 - 200 mm 177 112 5,5 30 8 *different indicating instruments on request ** in zero position ? rugged steel frame, heat- insulated, chromium-plated (up to measuring range 100-150 mm) ? maximum stability (one piece frame and spindle guide for measuring ranges 0-100 mm) ? retraction of the movable anvil and carbide-tipped measuring faces ensure maximum wear resistance features ? measuring spindle made of stainless steel, hardened throughout and ground, lockable ? scales with satin-chrome finish ? constant measuring force ? heat insulators ? standard accessories: dial comparator 1003, wooden case mahr a e c 0 5 45 0 40 t d 7, 5 b ?17,5 67
1-23 101 87,5 5,5 26x15 29 0 5 45 40ts 0-50 ?7,5 ?25 40 ts 45 140 x 80 mahr 0,005mm micrometers precision bench micrometer 40 ts features application ? for rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) ? measurements of thickness and length ? recommended for standard precision parts technical data ? rugged steel frame, can be swivelled up to 45 in relation to the heavy-duty base ? retraction of the movable anvil and carbide-tipped measuring faces ensure maximum wear resistance ? height-adjustable stop ? constant measuring force ? measuring spindle made of stainless steel, hardened throughout and ground, fixable ? scales with satin-chrome finish ? standard accessories: dial comparator 1003/ 1003 z setting standards, etc. see page 1-24 accessories micrometer screw dial comparator 1003/1003z* readings span of spindle span of meas. readings error thread error f e range f me pitch (din 879) 0,01 mm 2 m 0,5 mm 1 m 50 m 1 m .00025 .00008 .025 .00005 .002 .00005 * different indicating instruments on request measuring retraction measuring faces measuring order no. order no. range flatness parallelism force wooden case 0-50 mm 1,2 mm 0,2 m 2 m 6,5 n 4154030 4154035 0-2 .045 .00001 .00008 6,5 n 4154930 4154035
1-24 stand 41 h ? for mounting micrometers ? allows operator to use both hands to operate micrometer and insert workpiece ? rugged, heavy-duty base, hammer dimple enamel dimensions order no. (d x w x h) 130 x 100 x 90 mm 4158000 ball tip slip-on anvil 40 k ? for measuring pipe wall thicknesses 3,5 6,5 7, 8 ?9,5 40 k ?9 mahr order no. 41 30099 setting standards 43 n ? heat insulators ? manufacturing tolerance js 2 ? each 1 flat and 1 spherical measuring face ? for checking of basic setting of micrometers micrometers accessories for precision micrometers ? clamping jaws swivellable, rubber lining to protect the micrometers ? clamping of jaws and link with one screw ? slips over anvil or measuring spindle with dia. 7,5 mm ? carbide ball, ball dia. 5 0,002 mm length order no. length order no. mm mm 25 4159300 125 4159304 50 4159301 150 4159305 75 4159302 175 4159306 100 4159303 200 4159307 length order no. inch 1 4159930 2 4159931 3 4159932 4 4159933 41 h 43 n
1-25 thread pin gauges 426 m in holders ? for slipping over spindle and anvil ? pin gauges hardened and lapped ? for determining pitch diameter of external threads according to three-wire method pin gauge dia. manufacturing tolerance mounting hole 0,17 - 5,05 mm 0,5 m ? 7,5 mm* * ?6,35/6,5/8 mm on request order no. and further details see page 10-7 inch-type on request ceramic gauge block set 419 c/1 for testing of micrometers ? standard accessories: traceable mahr calibration certificate and wooden case ? testing of span of error f max of micrometers according to din 863 ? testing of flatness and parallelism of measuring faces with optical parallel gauge blocks optical parallel order no. accuracy acc. to din 861 quantity nominal sizes ? thickness mm mm 1 10 2,5 / 5,1 / 7,7 / 10,3 / 12,9 / 15,0 / 17,6 / 20,2 / 22,8 / 25 30 12 4800090 m d 2 a/2 d d p 426 m micrometers wooden cases for precision micrometers for measuring ranges over 100 mm the following wooden cases are available: 40 sh 40 sm order no. measuring 100-125 95-120 4130064 ranges 125-150 120-145 4130065 mm 150-175 145-170 4130066 175-200 170-195 4130067 accessories for precision micrometers
1-26 inside micrometer 44 f micrometers ? rigid, lightweight tubular design ? measuring spindle hardened throughout and ground ? measuring faces spherically lapped, one measuring face adjustable ? scales with satin-chrome finish ? as of 100-125 mm measuring range, heat insulators and locking device ? standard accessory: case measuring range readings span of spindle order no. error f max thread (din 863) pitch mm mm m mm 30 - 40 0,01 4 0,5 4163000 40 - 50 0,01 4 0,5 4163001 50 - 70 0,01 5 0,5 4163002 70 - 100 0,01 5 0,5 4163003 100 - 125 0,01 6 0,5 4163004 125 - 150 0,01 6 0,5 4163005 150 - 175 0,01 7 0,5 4163006 175 - 200 0,01 7 0,5 4163007 technical data accessories page ring gauges 355 e 10-2 for checking basic setting special wear-resistant steel hardened and lapped dimensions din 2250 c manufacturing tolerance din 2250 uncertainty of engraved actual deviation 1/2 it1 features dimensions mm a b measuring 30 - 70 mm 7 12,5 ranges 70 - 100 mm 7 13,5 100 - 200 mm 8 20 a b a 5 0 45 100 355 e
1-27 11 44 cm a ?16 ?18 5 0 45 5 0 inside micrometer 44 c for extra-large diameters up to 2500 mm micrometers ? rigid, lightweight tubular design ? measuring spindle hardened throughout and ground ? locking lever ? scales with satin-chrome finish features measuring head 44 cm ? cylindrical gauge rods spring-mounted in protective sleeves ? carbide-tipped spherical contact surfaces features extensions 44 cv technical data dimensions mm a b 44 cv 25 15 50 15 100 15 200 15 400 15 800 22 9 44 cv a m10x1 b 11 order no. case for measuring head 44 cm and extension set cvs1 or cvs2 4168015 wooden case for 2 extensions 44cv 800 mm 4168016 page ring gauge 355 e for checking 10-2 basic setting of measuring head 44 cm wear-resistant steel, hardened and lapped dimensions din 2250 c manufacturing tolerance din 2250 uncertainty of engraved actual deviation 1/2 it1 accessories ? carbide-tipped spherical measuring faces ? high accuracy (l = length of combinations in mm) 4 m + 10 x 10 -6 x l cat. meas. measuring head extensions order no. remarks no. range readings spindle quantity length thread pitch in mm mm mm mm measuring head 44 cms1 100-150 0,01 0,5 1 25 4168020 incl. case and extensions 44 cms2 100-300 0,01 0,5 3 25 / 50 / 100 4168021 incl. case in sets 44 cms3 100-500 0,01 0,5 4 25 / 50 / 100 / 200 4168022 incl. case 44 cms4 100-900* 0,01 0,5 5 25 / 50 / 100 / 200 / 400 4168023 incl. case measuring head 44 cm 100-125 0,01 0,5 - 4168001 single 44 cv 125 4167030 extensions 1 50 4167031 1 100 4167032 1 200 4167033 1 400 4167034 1 800 4167035 extension 44 cvs1 4 25 / 50 / 100 / 200 4168011 incl. case sets for 44 cm 44 cvs2 5 25 / 50 / 100 / 200 / 400 4168012 incl. case *up to 2500 mm with 2 extensions 44 cv 800 mm
1-28 self-centering inside micrometer 44 y inimar micrometers ? scales with satin-chrome finish ? carbide-tipped anvils ? measuring spindle hardened throughout and ground ? as of 25 mm, exchangeable anvils permitting 2 measuring ranges per head ? as of 50 mm, aluminium measuring head to minimize weight ? standard accessories: wooden case, ring gauges with traceable mahr calibration certificate features application technical data measuring readings spindle span of ring order no. range thread error gauges pitch f max mm mm mm m ? mm 6 - 8 0,005 0,5 3 8 4182100 8 - 10 0,005 0,5 3 8 4182101 10 - 12,5 0,005 0,5 3 12,5 4182102 12,5 - 16 0,005 0,5 3 16 4182103 16 - 20 0,005 0,5 3 20 4182104 20 - 25 0,005 0,5 3 20 4182105 25 - 35 0,005 0,5 3 30 4182106 35 - 50 0,005 0,5 3 42,5 4182107 50 - 75 0,005 0,5 4 62,5 4182108 75 - 100 0,005 0,5 4 87,5 4182109 100 - 125 0,005 0,5 5 112,5 4182110 125 - 150 0,005 0,5 5 137,5 4182111 150 - 175 0,005 0,5 5 162,5 4182112 175 - 200 0,005 0,5 6 187,5 4182113 200 - 225 0,005 0,5 6 212,5 4182114 225 - 250 0,005 0,5 6 237,5 4182115 250 - 275 0,005 0,5 6 262,5 4182116 275 - 300 0,005 0,5 6 287,5 4182117 measuring number ring order no. range of gauges mm micrometers ? mm 6 - 12,5 3 8 / 12,5 4182050 12,5 - 20 2 16 4182051 20 - 50 3 20 / 30 / 42,5 4182052 50 - 100 2 62,5 / 87,5 4182053 self-centering inside micrometers in sets 44 ys ? standard accessories: wooden case, ring gauges with traceable mahr calibration certificate accessories extensions, measuring heads, ring gauges see page 1-30 measurements of ? through holes ? blind holes ? registers
1-29 self-centering digital inside micrometer 44 ye micrometers ? instrument consists of micrometer screw 44 yeg and measuring head 44 yk ? functions: on/off reset (zero setting) mm/inch hold (storage of measuring value) data (data transmission) preset (set buttons can be used to enter any numerical value) tol (tolerance display) ? data output: opto rs232c via data connecting cable ? high contrast 6 mm liquid crystal display ? interchangeable measuring heads ? carbide-tipped anvils ? as of 25 mm, exchangeable anvils permitting 2 measuring ranges per head ? as of 50 mm, aluminium measuring head to minimize weight ? standard accessories: wooden case, ring gauges with traceable mahr calibration certificate features measurements of ? through holes ? blind holes ? registers application technical data measuring range readings span of ring order no. error gauges mm (inch) mm / inch m (inch) ? mm 6-8 (.24-.31) 0,001 / .00005 4 (.00015) 8 4182800 8-10 (.31-.39) 0,001 / .00005 4 (.00015) 8 4182801 10-12,5 (.39-.49) 0,001 / .00005 4 (.00015) 12,5 4182802 12,5-16 (.49-.63) 0,001 / .00005 4 (.00015) 16 4182803 16-20 (.63-.79) 0,001 / .00005 4 (.00015) 20 4182804 20-25 (.79-1) 0,001 / .00005 5 (.0002) 20 4182805 25-35 (1-1.38) 0,001 / .00005 5 (.0002) 30 4182806 35-50 (1.38-2) 0,001 / .00005 5 (.0002) 42,5 4182807 50-75 (2-3) 0,001 / .00005 5 (.0002) 62,5 4182808 75-100 (3-4) 0,001 / .00005 5 (.0002) 87,5 4182809 100-125 (4-5) 0,001 / .00005 6(.00025) 112,5 4182810 125-150 (5-6) 0,001 / .00005 6(.00025) 137,5 4182811 150-175 (6-7) 0,001 / .00005 6(.00025) 162,5 4182812 175-200 (7-8) 0,001 / .00005 6(.00025) 187,5 4182813 200-225 (8-9) 0,001 / .00005 7 (.0003) 212,5 4182814 225-250 (9-10) 0,001 / .00005 7 (.0003) 237,5 4182815 250-275 (10-11) 0,001 / .00005 7 (.0003) 262,5 4182816 275-300 (11- 12) 0,001 / .00005 7 (.0003) 287,5 4182817 measuring range no. of ring order no. measuring gauges mm (inch) heads ? mm 6 - 12,5 (.24 -.49) 3 8 / 12,5 4182850 12,5- 20 (.49 -.79) 2 16 4182851 20 - 50 (.79 -2) 3 20 / 30 / 42,5 4182852 50 - 100 (2 -4) 2 62,5 / 87,5 4182853 self-centering digital inside micrometers in sets 44 yes ? standard accessories: wooden case, ring gauges with traceable mahr calibration certificate extensions, measuring heads, ring gauges see page 1-30 accessories
1-30 micrometers measuring head 44 yk ? interchangeable measuring heads ? carbide-tipped anvils ? as of 25 mm, exchangeable anvils permitting 2 measuring ranges per head ? as of 50 mm, aluminium measuring head to minimize weight accessories for self-centering inside micrometers measuring range order no. mm (inch) 6 - 8 (.24 - .31) 4182030 8 - 10 (.31 - .39) 4182031 10 - 12,5 (.39 - .49) 4182032 12,5 - 16 (.49 - .63) 4182033 16 - 20 (.63 - .79) 4182034 20 - 25 (.79 - 1) 4182035 25 - 35 (1 - 1.38) 4182036 35 - 50 (1.38 - 2) 4182037 50 - 75 (2 - 3) 4182038 75 - 100 (3 - 4) 4182039 100 - 125 (4 - 5) 4182040 125 - 150 (5 - 6) 4182041 150 - 175 (6 - 7) 4182042 175 - 200 (7 - 8) 4182043 200 - 225 (8 - 9) 4182044 225 - 250 (9 - 10) 4182045 250 - 275 (10 - 11) 4182046 275 - 300 (11 - 12) 4182047 measuring head 44 yw for internal threads the following types are available on request: ? metric thread ? withworth-thread ? ust-thread ? design 4- 9 mm: two-point-measurement 10- 200 mm: three-point-measurement adapter for two-point-thread measurement order no. 4487851 special measuring heads for measurements of recesses or special measuring tasks on request ring gauges 44 e ? with traceable mahr calibration certificate ? up to 25 mm dia., one ring gauge can be used for any two consecutive inside micrometer sizes ? as of 25 mm dia., one ring gauge for each measuring range dia. mm order no. dia. mm order no. 8 4182300 62,5 4182306 12,5 4182301 87,5 4182307 16 4182302 112,5 4182308 20 4182303 137,5 4182309 30 4182304 162,5 4182310 42,5 4182305 187,5 4182311 micrometer screw 44 yeg threaded for mounting interchangeable measuring heads 44 yk and 44 yw measuring range order no. mm (inch) 6 - 12,5 (.39 - .49) 4182830 12,5 - 20 (.49 - .79) 4182831 20 - 50 (.79 - 2) 4182832 50 - 100 (2 - 4) 4182833 100 - 200 (4 - 8) 4182834 200 - 300 (8 - 12) 4182835 extensions 44 yv for measurement of extra-long holes. spring-loaded transfer rod mounted in steel sleeve with satin-chrome finish. measuring range length a dia. b order no. mm (inch) mm mm 6 - 10 (.24 - .39) 63 5,8 4182090 10 -12,5 (.39 - .49) 100 9,25 4182091 12,5 - 20 (.49 - .79) 100 12,2 4182092 20 - 50 (.79 - 2) 150 18,8 4182093 50 - 300 (2 - 12) 150 24,5 4182094 44 yv a b b c a d a b c d measuring ranges mm a b c d 6 - 8 1,65 2,7 2 60 8 - 10 1,65 2,9 2,5 60 10 - 12,5 2,0 3,9 2,5 62 12,5 - 16 0,7 6,7 3,5 63 16 - 20 0,7 8,7 4,5 63 20 - 25 0,8 11,9 4,5 67 25 - 35 0,8 12,3 4,5 67 35 - 50 0,8 13,3 4,5 67 50 - 100 0,8 17,8 4,5 81 100 - 125 0,15 23,8 7 81 125 - 150 0,15 23,8 7 106 150 - 200 0,15 23,8 7 119 200 - 300 0,15 21,2 7 117,5 measuring range 6 - 12,5 mm measuring range 12,5 - 200 mm
1-31 45 0 5 25 20 15 45 0 5 25 20 15 25 45 0 5 c a b 1,00 depth micrometer 45 t micrometers application ? depths measurements ? measurement of groove spacings and groove widths with disc anvil 45 tm technical data total meas. range of readings spindle span of error extensions length tolerance order no. range micrometer thread with of screw pitch standard anvil extensions mm mm mm mm m mm m 0-100 25 0,01 0,5 5 m 25/50 1,5 m 4180000 technical data accessories order no. disc anvil 45 tm for groove spacings and groove widths 4180011 extensions 45 tv length l length tolerance 25 mm 1,5 m 4180001 50 mm 1,5 m 4180002 100 mm 1,5 m 4180003 ? measuring spindle hardened throughout and ground ? hardened, chromium-plated cross beam, lapped contact surface ? hardened anvil ? when interchangeable extensions are inserted, calibrating of the instrument is not necessary ? scales with satin-chrome finish ? standard accessories: extensions 25 mm and 50 mm, case measurements of groove spacings measurements of groove spacings measurements of groove spacings measurements of groove spacings measurements of groove spacings and groove widths and groove widths and groove widths and groove widths and groove widths with disc anvil 45 tm if necessary with extensions dimension a: take reading directly from thimble dimension b: reading + 1,00 mm (thickness of disc) dimension c: dimension b minus dimension a 13 100 x 16 45 0 5 25 20 15 1 ?9 m3 45 tm standard depth measurements standard depth measurements standard depth measurements standard depth measurements standard depth measurements with standard anvil and if necessary with extensions
1-32 27 ?6,35 ?17,5 ?18,5 ?10 6h 15 46 ?10 2,2 3,5 2,5 27 ?6,35 ?17,5 ?18,5 ?10 6h 15 46 ?10 2,2 3,5 2,5 9 ?3,5 ?8,6 ?9,5 ?6 -0,008 6 19,5 1 17,5 ?5 ?14,2 ?15 ?9,5 6h 9,5 26,5 ?10 2 3,5 2,5 27 ?7,5 2,5 ?12 6h 16 46 ?17,5 ?18,5 13 1,2 ?12 10 0 40 0 5 0 45 0 5 0 45 0 5 0 45 0 5 0 45 0 micrometer heads 46 micrometers ? measuring spindle made of stainless steel, hardened throughout and ground ? scales with satin-chrome finish features measuring readings span of error spindle spindle order no. range (din 863) thread dia. pitch mm mm m mm mm 46 0 - 6,5 0,01 3 0,5 3,5 4183021 0 - 13 0,01 3 0,5 5 4183025 0 - 25 0,01 3 0,5 6,35 4183030 0 - 25* 0,01 3 0,5 6,35 4183024 46 h 0 - 25** 0,01 3 0,5 7,5 4184000 * with adjusting nut ** with ratchet, carbide-tipped further measuring ranges on request technical data measuring range 0-6,5 mm measuring range 0-13 mm measuring range 0-25 mm measuring range 0-25 mm with adjusting nut measuring range 0-25 mm carbide-tipped

▲Up To Search▲

Price & Availability of 4100400

	To Download 4100400 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .