material safety data sheet no. 0064e page 1 of 4 material safety data sheet chemtronics cw2200 circuitworks conductive pen 1. identification of substance/preparation and of the company/undertaking commercial product name: code no. circuitworks conductive pen cw2200stp cw2200mtp cw2200blk manufacturer/supplier: chemtronics, inc. 8125 cobb center drive kennesaw, georgia 30152 usa phone number: 1-770-424-4888 fax number: 1-770-423-0748 emergency: 1-703-527-3887 2. composition/information on ingredients hazardous ingredients cas no. classification r phrases concentration silver 7440-22-4 - - 35.0-65.0 propylene glycol methyl ether acetate 108-65-6 xi r10, r36 2.0-20.0 ethylene glycol monobutyl ether acetate 112-07-2 xn r20/21 2.0-20.0 butyl acetate 123-86-4 f r10 5.0-35.0 3. hazards identification main hazards flammable. health effects - eyes liquid may cause slight transient irritation. health effects - skin repeated or prolonged contact may produce defatting of the skin leading to irritation and dermatitis. health effects - ingestion swallowing may have the following effects: dizziness, light headedness, drowsiness , nausea. health effects - inhalation exposure to vapour at high concentrations may have the following effects: drowsiness, unconsciousness. 4. first-aid measures first aid - eyes immediately flood the eye with plenty of water for at least 15 minutes, holding the eye open. obtain medical attention if soreness or redness persists. first aid - skin wash skin with soap and water. apply a reconditioning skin cream. first aid - ingestion give two or more glasses of water. do not induce vomiting. obtain medical attention. first aid - inhalation remove from exposure. seek medical attention if you feel unwell. material safety data sheet chemtronics cw2200 circuitworks conductive pen 5. fire-fighting measures extinguishing media use foam, dry chemical or carbon dioxide. unsuitable extinguishing media: do not use waterjet. special hazards of product: this product may give rise to hazardous fumes in a fire.
material safety data sheet no. 0064e page 2 of 4 protective equipment for fire-fighting: wear self contained breathing apparatus. 6. accidental release measures personal precautions: ventilate the area. wear appropriate protective clothing. environmental precautions: try to prevent the material from entering drains or water courses. spillages: contain and absorb using earth, sand or other inert material. 7. handling and storage handling: use in well ventilated area. storage: storage area should be: out of direct sunlight, away from sparks and flames. storage temperature should be kept below 50 c. 8. exposure controls /personal protection engineering control measures exposure to this material may be controlled in a number of ways. the measures appropriate for a particular worksite depend on how the material is used and on the potential for exposure. use of the basic principles of industrial hygiene will enable this material to be used safely. respiratory protection general ventilation should be sufficient. hand protection: use a good quality barrier cream. eye protection: chemical goggles if there is a risk of eye contact. body protection: normal work wear. 9. physical and chemical properties physical state: paste colour: silver/gray odour: mild hydrocarbon boiling range/point ( c): 126-192 explosion limits (%): lower/upper 1.5/10.0 solubility in water (kg/m3): insoluble vapour pressure (mm.hg./20 c) 5-6 density (kg/m3) 1.80 material safety data sheet chemtronics cw2200 circuitworks conductive pen 9. physical and chemical properties continued vapour density (air=1): >1 evaporation rate: >1 10. stability and reactivity stability: stable under normal conditions. conditions to avoid: sources of ignition. temperatures in excess of 50 c. materials to avoid: strong oxidizing agents, acids, bases, caustics. hazardous decomposition products: combustion will generate: oxides of carbon, oxides of nitrogen, monomers and smoke. 11. toxicological information
material safety data sheet no. 0064e page 3 of 4 acute toxicity low order of acute toxicity. 12. ecological information mobility: no product specific data is available. persistence/degradability: no product specific data is available. bio-accumulation: no product specific data is available. 13. disposal considerations container disposal: plastic caps and empty containers may be recycled via appropriate routes. do not incinerate closed containers. 14. transportation information un number: 1263 un proper shipping name: paint un class 3 un packaging group ii adr/rid substance identification number 1263 adr/rid - description inflammable liquids having a flash-point below 21 c, not toxic and not corrosive. adr/rid - class 3 adr/rid - item no. 3b adr/rid - hazard identification number 33 imdg - proper shipping name paint imdg - packaging group ii imdg - class 3.2 imdg - marine pollutant no. imdg - ems number 3-07 imdg - page number 3268 iata - proper shipping name paint iata - packaging group ii iata - class 3 tremcard no. tec(r) 527 material safety data sheet chemtronics cw2200 circuitworks conductive pen 15. regulatory information labeling information f flammable. r phrases : flammable. s phrases : keep away from sorces of ignition - no smoking. use only in well vetilated areas. keep away from children. do not breathe gas/vapour/spray. avoid contact with eyes. 16. other information: product information: 1-770-424-4888 product use: for industrial use only. msds first issued: 5/31/96 msds data revised: 4/3/98 ec legislation ec directive 91/155/eec defining the laying down and detailed arrangements for the system of specific information relating to dangerous preparations. ec directive 88/379/eec relating to the classification, packaging and labelling of dangerous preparations.
material safety data sheet no. 0064e page 4 of 4 to the best of our knowledge, the information contained herein is accurate. however, all materials may present unknown hazards and should be used with caution. in particular, improper use of our products and their inappropriate combination with other products and substances may produce harmful results which cannot be anticipated. final determination of the suitability of any material is the sole responsibility of the user. although certain hazards are described herein, we cannot guarantee that these are the only hazards that may exist.
|
