microwave corporation 12 - 19 for price, delivery, and to place orders, please contact hittite microwave corporation: 12 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com mixers - smt 12 -20 -15 -10 -5 0 conversion loss (db) 0 1 2 3 4 5 67 89 1011 rf frequency (ghz) -60 -50 -40 -30 -20 -10 0 isolation (db) 012 34567891011 frequency (ghz) rf/if lo /if lo/rf lo /if lo/rf conversion loss isolation -15 -12.5 -10 -7.5 -5 conversion loss (db) rf frequency (ghz) +13dbm +10dbm +9dbm +15dbm +8dbm 012 3456 7891011 conversion loss vs lo power v01.0801 HMC168C8 gaas mmic smt double- balanced mixer, 4.5 - 8 ghz -40 -30 -20 -10 0 return loss (db) 012345 67891011 frequency (ghz) if rf lo return loss distortion and 1db compression vs. lo drive level s - parameters for the rf, lo, if ports are available on-line at www.hittite.com distortion lo drive rf (f1) = 6.01 ghz rf (f2) = 6.00 ghz lo = 6.5 ghz rf level = 0 dbm 1 db compression (dbm) ip3 (dbm) ip2 (dbm) p1db (dbm) +7 14 59 8.5 +10 16 62 10 +13 18 65 11 +15 19 65 11
microwave corporation 12 - 20 for price, delivery, and to place orders, please contact hittite microwave corporation: 12 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com mixers - smt 12 outline drawing absolute maximum ratings v01.0801 HMC168C8 gaas mmic smt double- balanced mixer, 4.5 - 8 ghz rf / if input +13 dbm lo drive +27 dbm storage temperature -65 to +150 c operating temperature -55 to +85 c notes: 1. package body material: white alumina 92% 2. lead, package bottom material: copper 3. plating: electrolytic gold 100-200 microinches, over electrolytic nickel 100-250 microinches. 4. dimensions are in inches [millimeters]. 5. package length and width dimensions do not include lid seal protrusion .005 per side. 6. all ground leads and ground paddle must be soldered to pcb rf ground.
microwave corporation 12 - 21 for price, delivery, and to place orders, please contact hittite microwave corporation: 12 elizabeth drive, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order online at www.hittite.com mixers - smt 12 v01.0801 HMC168C8 gaas mmic smt double- balanced mixer, 4.5 - 8 ghz evaluation pcb list of material item description j1 - j3 pc mount sma rf connector u1 HMC168C8 mixer pcb* 107214 evaluation board * circuit board material: rogers 4350 the circuit board used in the ? nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a suf? cient number of via holes should be used to con- nect the top and bottom ground planes. the evalua- tion circuit board shown is available from hittite upon request.
|
