View GLD10010_1912034.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features ?lead free, rohs compliant high q high self-resonant frequency including nonmagnetic models in microwave range shielded series use ferrite filled encapsulation to reduce external magnetic coupling low dc resistance carrier and reel packaging is standard ten case sizes specifications electrical inductance & q, etc.: see tables temperature range ?0? to +85?, except gly, glyc, g lz, glzb and glzp models are 40? to +85? - change of l = ?0% max, except glx, gly, glyc, glz, glzb and glzp models are 5% - change of q = ?0% max, except gly, glyc, glz, glzb and glzp models are ?5% rated current: see tables. current rating is determined by either or both of the following conditions: 1. self heating raises surfcoil temperature 20? 2. inductance value reduced by 10% from saturation effect mechanical (chip inductors) suitable for wave flow soldering, infrared, and vapor phase reflow (typically over 90% coverage) withstands soldering temperatures without damage fully encapsulated and thermally cycled for stability and highest reliability [view applies to molded bobbin wound types] encapsulation: epoxy resin all series; glc, gld and glw have ferrite filler for closed magnetic circuit. core: ferrite (except high frequency gla and glu series, which are nonmagnetic) coil: polyurethane enameled copper wire terminal: phosphor-bronze tin plated sprague-goodman surfcoil smt inductors engineering bulletin sg-800h.1 supercedes sg-800g sprague-goodman electronics, inc. 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com
surfcoil smt inductors sg-800h 2 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516- 334-8700 fax: 516-334-8771 e-mail: info@ spra guegoodman.com glz series ? laser cut 0402 size induct- standard srf q/l test rated dcr ance inductance model (mhz) q freq. current ( ? ? ?
surfcoil smt inductors sg-800h sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516- 334-8700 fax: 516-334-8771 e-mail: info@ spr aguegoodman.com 3 gly series ? laser cut 0603 size inductance standard srf rated dcr l (nh) inductance model (ghz) q typ q min current ( ? frequency (mhz) typical q versus frequency ? gly and glyc series q 47 nh gly 4.7 nh gly 60 80 10000 10 nh glyc * 0.2 nh inductance tolerance is available for inductance values from 1.0 to 8.2 nh. 2% inductance tolerance is available for inductance values of 10.0 nh and up. consult factory regarding these special units. glyc series ? high current low dcr laser cut 0603 size inductance standard srf rated dcr l (nh) inductance model (ghz) q min current (m ?
surfcoil smt inductors sg-800h 4 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com *5% inductance tolerance is available for inductance values of 0.033 h and up. 0.049 pad layout all dimensions are in/mm. glx series outline drawing 0.047 ? frequency (mhz) typical q versus frequency ? non magnetic glx series q 0.1 q glx series ? high frequency nonmagnetic wirewound 0805 size inductance standard srf q/l test rated dcr l inductance model (mhz) q frequency current ( ?
surfcoil smt inductors sg-800h sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com 5 inductance standard inductance model srf (mhz) q q/l test rated current dcr ( ? ?
surfcoil smt inductors sg-800h 6 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com gla series ? molded bobbin wound 1210 size inductance standard inductance model srf (mhz) q q/l test rated current dcr ( ? ?
surfcoil smt inductors sg-800h sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com 7 glc series ? shielded molded bobbin wound 1210 size standard inductance srf q test rated dcr inductance inductance test freq. model (mhz) q frequency current ( ? ?
surfcoil smt inductors sg-800h 8 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com glbp series ? high current low dcr shielded molded bobbin wound 1812 size carrier and reel specifications on page 12. 0.126 ? ?
surfcoil smt inductors sg-800h sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com 9 standard inductance srf q test rated dcr inductance inductance test freq. model (mhz) q frequency current ( ?
surfcoil smt inductors sg-800h.1 10 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com gl06 series ? economy surfcoil air core inductors induct- standard q/l test ance inductance model q frequency id b l c d l (nh) tolerance* no. min (mhz) (in/ mm) (in/ mm) (in/ mm) (in/ mm) (in/ mm) 1.65 10% gl06a01n6510 100 800 0.018 / 0.45 0.061 / 1.55 0.088 / 2.23 0.04 / 1.00 0.10 / 2.6 2.55 10% gl06a02n5510 100 800 0.020 / 0.52 0.052 / 1.32 0.090 / 2.29 0.04 / 1.00 0.10 / 2.6 3.85 10% gl06a03n8510 100 800 0.020 / 0.52 0.058 / 1.46 0.098 / 2.50 0.04 / 1.00 0.10 / 2.6 5.40 5% gl06a05n4005 100 800 0.021 / 0.54 0.106 / 2.69 0.84 / 2.14 0.04 / 1.00 0.10 / 2.6 5.60 5% gl06a05n6005 100 800 0.021 / 0.54 0.059 / 1.50 0.164 / 4.16 0.112 / 2.85 0.18 / 4.5 7.15 5% gl06a07n1505 100 800 0.026 / 0.65 0.064 / 1.62 0.172 / 4.38 0.112 / 2.85 0.18 / 4.5 8.80 5% gl06a08n8005 100 800 0.026 / 0.65 0.064 / 1.62 0.165 / 4.19 0.112 / 2.85 0.18 / 4.5 9.85 5% gl06a09n8505 100 800 0.026 / 0.65 0.065 / 1.65 0.163 / 4.15 0.112 / 2.85 0.18 / 4.5 12.55 5% gl06a12n5505 100 800 0.030 / 0.7 0.061 / 1.55 0.163 / 4.15 0.112 / 2.85 0.18 / 4.5 gl12 series ? economy surfcoil air core inductors induct- standard q/l test ance inductance model q frequency id b l c d l (nh) tolerance* no. min (mhz) (in/mm) (in/mm) (in/mm) (in/mm) (in/mm) 2.5 10% gl12a02n5010 100 150 0.053 / 1.35 0.091 / 2.3 0.11 / 2.9 0.065 / 1.65 0.17 / 4.2 5.0 10% gl12a05n0010 100 150 0.053 / 1.35 0.082 / 2.1 0.135 / 3.45 0.065 / 1.65 0.17 / 4.2 8.0 10% gl12a08n0010 100 150 0.061 / 1.55 0.10 / 2.6 0.15 / 3.7 0.065 / 1.65 0.17 / 4.2 12.5 10% gl12a12n5010 100 150 0.060 / 1.53 0.11 / 2.7 0.2 / 4 0.065 / 1.65 0.17 / 4.2 18.5 10% gl12a18n5010 100 150 0.061 / 1.55 0.10 / 2.6 0.135 / 3.45 0.065 / 1.65 0.17 / 4.2 17.5 10% gl12a17n5010 100 150 0.061 / 1.55 0.11 / 2.7 0.25 / 6.4 0.19 / 4.7 0.29 / 7.3 22.5 5% gl12a22n5005 100 150 0.061 / 1.55 0.11 / 2.7 0.27 / 6.8 0.19 / 4.7 0.29 / 7.3 28.0 5% gl12a28n0005 100 150 0.061 / 1.55 0.11 / 2.7 0.26 / 6.6 0.19 / 4.7 0.29 / 7.3 35.5 5% gl12a35n5005 100 150 0.061 / 1.55 0.11 / 2.8 0.24 / 6.2 0.19 / 4.7 0.29 / 7.3 43.0 5% gl12a43n0005 100 150 0.061 / 1.55 0.11 / 2.8 0.26 / 6.6 0.19 / 4.7 0.29 / 7.3 encapsulation (flat surface for ease of pick & place) tin plate l id b 0.051 1.3 d c pad layout 0.13 3.3 typ 0.11 2.8 176 4 gl12 series outline drawing all dimensions are in/mm. encapsulation (flat surface for ease of pick & place) tin plate l id b 0.03 0.8 d c pad layout 0.098 2.5 typ 0.04 1.0 176 4 gl06 series outline drawing all dimensions are in/mm. * tighter tolerances are available, consult factory. * tighter tolerances are available, consult factory. carrier and reel specifications are on the web at www.spraguegoodman.com/800/800p1/html
surfcoil smt inductors sg-800h.1 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com 11 gl15 series ? economy surfcoil air core inductors inductance standard q/l test l inductance model q frequency id b l (nh) tolerance* no. min (mhz) (in/mm) (in/mm) (in/mm) 22.0 150 gl15a22n0005 100 150 0.096 / 2.45 0.1 / 3 0.2 / 5 27.0 150 gl15a27n0005 100 150 0.08 / 2.2 0.1 / 3 0.18 / 4.5 33.0 150 gl15a33n0005 100 150 0.096 / 2.45 0.1 / 3 0.21 / 5.3 39.0 150 gl15a39n0005 100 150 0.087 / 2.2 0.1 / 3 0.19 / 4.9 47.0 150 gl15a47n0005 100 150 0.098 / 2.5 0.11 / 2.8 0.19 / 4.8 56.0 150 gl15a56n0005 100 150 0.091 / 2.3 0.12 / 3.1 0.12 / 4.7 68.0 150 gl15a68n0005 100 150 0.100 / 2.55 0.11 / 2.8 0.17 / 4.4 82.0 150 gl15a82n0005 100 150 0.098 / 2.5 0.12 / 3.1 0.18 / 4.5 100.0 150 gl15ar100005 100 150 0.096 / 2.45 0.1 / 3 0.18 / 4.6 120.0 150 gl15ar120005 100 150 0.11 / 2.8 0.1 / 3 0.18 / 4.6 gl25 series ? economy surfcoil air core inductors inductance standard q/l test l inductance model q frequency id b l (nh) tolerance* no. min (mhz) (in/mm) (in/mm) (in/mm) 90.0 50 gl25a90n0005 90 50 0.12 / 3.05 0.1 / 3 0.35 / 8.8 111.0 50 gl25ar111005 90 50 0.12 / 3.05 0.1 / 3 0.35 / 8.8 130.0 50 gl25ar130005 90 50 0.12 / 3.05 0.11 / 2.9 0.34 / 8.6 150.0 50 gl25ar150005 90 50 0.128 / 3.25 0.1 / 3 0.33 / 8.4 169.0 50 gl25ar169005 90 50 0.128 / 3.25 0.1 / 3 0.33 / 8.4 206.0 50 gl25ar206005 90 50 0.128 / 3.25 0.1 / 3 0.3 / 8 222.0 50 gl25ar222005 90 50 0.128 / 3.25 0.13 / 3.3 0.33 / 8.5 246.0 50 gl25ar246005 90 50 0.128 / 3.25 0.14 / 3.5 0.4 / 9 307.0 50 gl25ar307005 90 50 0.13 / 3.4 0.13 / 3.3 0.34 / 8.6 380.0 50 gl25ar380005 90 50 0.14 / 3.5 0.12 / 3.1 0.33 / 8.4 422.0 50 gl25ar422005 90 50 0.14 / 3.6 0.12 / 3.1 0.33 / 8.5 491.0 50 gl25ar491005 90 50 0.14 / 3.6 0.124 / 3.15 0.33 / 8.5 538.0 50 gl25ar538005 90 50 0.144 / 0.365 0.1 / 3 0.34 / 8.6 encapsulation (flat surface for ease of pick & place) tin plate l id b 0.08 2 pad layout 0.19 4.7 0.91 2.3 176 4 0.2 6 0.39 10 gl25 series outline drawing encapsulation (flat surface for ease of pick & place) tin plate l id b 0.059 1.5 pad layout 0.20 5.2 typ 0.10 2.6 176 4 0.11 2.8 0.23 5.8 gl15 series outline drawing all dimensions are in/mm. all dimensions are in/mm. carrier and reel specifications are on the web at www.spraguegoodman.com/800/800p1/html * tighter tolerances are available, consult factory. * tighter tolerances are available, consult factory.
c d e b a t w dimension a b c d e t w model tolerance series gla , glac , glc, gld, glu, glw glx, gly, glyc glb, glbp glz, glzb, glzp dimension a b c d e f g h k l m n model tolerance series gla, glac, glc, gld glb, glbp glu, glw glx gly, glyc glz, glzb, glzp 0.008 0.008 0.012 0.002 0.004 0.004 0.002 0.004 0.008 0.002 0.004 0.004 - ?e? - ?e? - ?e? - ?e? - ?e? - ?e? - ?e? - ?e? - ?e? - ?e? + - ?e? - ?e? 0.2 0.2 0.3 0.05 0.1 0.1 0.05 0.1 0.2 0.05 0.1 0.1 - 0 0.11 0.14 0.31 0.14 0.069 0.16 0.079 0.16 0.091 0.01 0.059 - ? e ? - ? e ? - ? e ? - ? e ? - ? ? e ? - ? e ? - ? e e ? - ? e e ? - ? e e ? - ? e ? - ? e e e e e ? ? 2.8 3.6 8.0 3.5 1.75 4.0 2.0 4.0 2.3 0.3 1.5 0.14 0.19 0.472 0.22 0.069 0.31 0.079 0.16 0.13 0.01 0.059 - ? ? e - ? e ? - ? e ? ? - ? e e e ? - ? ? e ? - ? e e e e e - ? ? e e e - ? e e e e ? - ? e e e e e - ? e ? - ? e e e e ? ? 3.6 4.9 12.0 5.5 1.75 8.0 2.0 4.0 3.4 0.3 1.5 0.095 0.11 0.31 0.14 0.069 0.16 0.079 0.16 0.073 0.01 0.059 0.043 - ? e e e ?? e e e e? e e e e? e e e ?? e e e e e ? - ? ? e e - ? ? e e e e - ? e ? - ? e e e e ? - ? e ? - ? e e e e ? - ? e e e e ? 2.4 2.9 8.0 3.5 1.75 4.0 2.0 4.0 1.85 0.3 1.5 1.1 0.057 0.089 0.31 0.14 0.069 0.16 0.079 0.16 0.055 0.0098 0.059 0.043 - ? ? e e e e - ? ? e e e e - ? ? - ? ? - ? e e e e ? - ? ? - ? ? e e e e - ? ? - ? e e e e ? - ? e e e ? ? - ? e e e e ? - ? e e e e ? 1.45 2.25 8.0 3.5 1.75 4.0 2.0 4.0 1.4 0.25 1.5 1.1 0.039 0.071 0.31 0.14 0.069 0.16 0.079 0.16 0.039 0.0098 0.059 - ? ? e e e e - ? e e e e ? - ? ? - ? ? - ? e e e e ? - ? ? - ? e e e e ? - ? ? - ? e e e e ? - ? ? e e e ? - ? e e e e ? ? 1.0 1.8 8.0 3.5 1.75 4.0 2.0 4.0 1.0 0.25 1.5 0.028 0.048 0.31 0.14 0.069 0.16 0.079 0.16 - ? ? e e e e - ? e e e e ? - ? ? - ? ? - ? e e e e ? - ? ? - ? e e e e ? - ? ? ???? 0.71 1.21 8.0 3.5 1.75 4.0 2.0 4.0 carrier specifications surfcoil smt inductors sg-800h 12 0.079 0.02 0.02 0.03 0.02 0.02 0.01 ? - ? e e e e ? - ? e e ? - ? e ? - ? e ? - ? e ? - ? e ? - ? e ? 2.0 0.5 0.5 0.8 0.5 0.5 0.3 7.01 2.4 0.51 0.83 0.079 0.043 0.35 2,000 - ? e ? - ? ? - ? ? - ? e ? - ? e e e e ? - ? e e e e ? - ? e e ? 178 60 13 21 2.0 1.1 9.0 7.01 2.4 0.51 0.83 0.079 0.043 0.35 3,000 - ? ? e - ? ? - ? ? - ? ? e - ? e e e e ? - ? e e e ? e - ? e ? 178 60 13 21 2.0 1.1 9.0 7.01 2.4 0.51 0.83 0.079 0.043 0.51 500 - ? e ? - ? ? - ? e ? - ? e ? - ? e e e e ? - ? ? ? - ? ? 178 60 13 21 2.0 1.1 13 7.01 2.4 0.51 0.83 0.079 0.043 0.35 10,000 - ? ? e - ? ? - ? ? - ? ? e - ? e e e e ? - ? e e e ? e - ? e ? 178 60 13 21 2.0 1.1 9.0 reel specifications qty cover tape e c d h g b m a f k n l all dimensions are in/mm. not to scale. ?2005 sprague-goodman electronics, inc., all rights reserved. printed in u.s.a. 2.50501 sprague-goodman electronics, inc., 1700 shames drive, westbury, ny 11590 tel: 516-334-8700 fax: 516-334-8771 e-mail: info@spraguegoodman.com reel outline drawing carrier outline drawing all dimensions are in/mm. not to scale.

▲Up To Search▲

Price & Availability of GLD10010

	To Download GLD10010 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .