new product b2s, b4s & b6s vishay general semiconductor document number: 88893 revision: 01-feb-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 miniature glass passivated single-phase surface mount bridge rectifier features ? ul recognition, file number e54214 ? saves space on printed circuit boards ? ideal for automated placement ? middle surge current capability ? meets msl level 1, per j-std-020, lf maximum peak of 250 c ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications general purpose use in ac-to-dc bridge full wave rectification for power supply, lighting ballaster, battery charger, home appliances, office equipment, and telecommunicatio n applications. mechanical data case: to-269aa (mbs) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked on body primary characteristics i f(av) 0.5 a v rrm 200 v, 400 v, 600 v i fsm 30 a i r 5 a v f 1.0 v t j max. 150 c to-269aa (mbs) ~ ~ ~ ~ note: (1) on glass epoxy p.c.b. mounted on 0.05 x 0.05" (1.3 x 1.3 mm) pads maximum ratings (t a = 25 c unless otherwise noted) parameter symbol b2s b4s b6s unit device marking code b2 b4 b6 maximum repetitive peak reverse voltage v rrm 200 400 600 v maximum rms voltage v rms 140 280 420 v maximum dc blocking voltage v dc 200 400 600 v maximum average forward output rectified current on glass-epoxy p.c.b. (fig. 1) i f(av) 0.5 (1) a peak forward surge current 10 msec single half sine-wave superimposed on rated load i fsm 30 a rating for fusing (t < 8.3 ms) i 2 t5.0 a 2 s operating junction and storage temperature range t j , t stg - 55 to + 150 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol value unit max. instantaneous forward voltage drop per diode 0.5 a v f 1.0 v maximum dc reverse current at rated dc blocking voltage per diode t a = 25 c t a = 125 c i r 5.0 100 a typical junction capacitance per diode 4.0 v, 1 mhz c j 13 pf
new product b2s, b4s & b6s vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88893 revision: 01-feb-08 2 note: (1) on glass epoxy p.c.b. mounted on 0.05 x 0.05" (1.3 x 1.3 mm) pads ratings and characteristics curves (t a = 25 c unless otherwise noted) thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol b2s b4s b6s unit typical thermal resistance (1) r ja r jl 90 40 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode b2s-e3/80 0.22 80 3000 13" diameter paper tape and reel figure 1. derating curve for output rectified current figure 2. maximum non-repetitive peak forward surge current per diode 0 20 40 60 8 0 100 120 140 160 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 . 8 glass epo xy p.c.b. resisti v e or ind u cti v e load am b ient temperat u re (c) a v erage for w ard rectified c u rrent (a) 1 10 100 0 5 10 15 20 25 30 35 f = 50 hz nu m b er of cycles peak for w ard s u rge c u rrent (a) 1.0 cycle figure 3. typical forward voltage characteristics per diode figure 4. typical reverse leak age characteristics per diode 0.4 0.6 0. 8 1.0 1.2 1.4 0.01 0.1 1 10 0.5 0.7 0.9 1.1 1.3 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 150 c t j = 125 c t j = 25 c 20 40 60 8 0 100 0.01 0.1 1 10 100 90 70 50 30 10 1000 percent of rated peak re v erse v oltage (%) instantaneo u s re v erse leakage c u rrent ( a) t j = 150 c t j = 125 c t j = 25 c
new product b2s, b4s & b6s vishay general semiconductor document number: 88893 revision: 01-feb-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 5. typical junction capacitance per diode 0.1 1 10 100 1 10 100 re v erse v oltage ( v ) j u nction capaci tance (pf) 0.029 (0.74) 0.017 (0.43) 0 to 8 0.049 (1.24) 0.039 (0.99) 0.062 (1.57) 0.05 8 (1.47) 0.016 (0.41) 0.006 (0.15) 0.01 8 (0.46) 0.014 (0.36) 0.00 8 (0.20) 0.004 (0.10) 0.114 (2.90) 0.110 (2. 8 0) 0.05 8 (1.47) 0.054 (1.37) 0.252 (6.40) 0.272 (6.90) 0.106 (2.70) 0.090 (2.30) 0.0075 (0.19) 0.0065 (0.16) 0.105 (2.67) 0.095 (2.41) 0.195 (4.95) 0.179 (4.55) 0.144 (3.65) 0.161 (4.10) 0.205 (5.21) 0.195 (4.95) 0.114 (2.90) 0.094 (2.40) 0.03 8 (0.96) 0.019 (0.4 8 ) 0.272 max. (6.91 max.) 0.030 mi n . (0.76 mi n .) 0.023 mi n . (0.5 8 mi n .) 0.105 (2.67) 0.095 (2.41) to-269aa (mbs) mountin g pad layout
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
