document number: 31514 revision 05-aug-02 www.vishay.com 58 MSM vishay dale for technical questions, contact: ff2aresistors@vishay.com features ? mil-prf-83401 qualified ? 0.195" [4.95mm] "a" and 0.350" [8.89mm] "c" maximum seated heights ? highly stable thick film ? tcr available in "k" ( 100ppm/ c) or "m" ( 300ppm/ c) characteristic ? all device leads are hot-solder dipped ? rugged molded case construction ? compatible with automatic insertion equipment ? 100% screen tested per group a, subgroup 1 of mil-prf-83401 ? all devices are capable of passing the mil-std-202, method 210, condition d "resistance to soldering heat" test ? available in tube pack thick film resistor networks military, mil-prf-83401 qualified, type rz single-in-line, molded sip; 01, 03, 05 schematics model/ schematic resistor package resistance standard temperature weight profile power rating power rating range tolerance* coefficient** max. @ 70 c max. @ 70 c (- 55 c to + 125 c) ww ? %g MSM06a 01 0.12 0.60 10 - 1m 2 k, m 0.4 MSM08a 01 0.12 0.84 0.5 MSM10a 01 0.12 1.08 0.6 MSM06a 03 0.12 0.36 10 - 1m 2 k, m 0.4 MSM08a 03 0.12 0.48 0.5 MSM10a 03 0.12 0.60 0.6 MSM06a 05 0.07 0.60 consult 2 k, m 0.4 MSM08a 05 0.07 0.84 factory 0.5 MSM10a 05 0.07 1.08 0.6 MSM06c 01 0.20 1.00 10 - 1m 2 k, m 0.7 MSM08c 01 0.20 1.40 0.9 MSM10c 01 0.20 1.80 1.1 MSM06c 03 0.20 0.60 10 - 1m 2 k, m 0.7 MSM08c 03 0.20 0.80 0.9 MSM10c 03 0.20 1.00 1.1 MSM06c 05 0.11 0.88 consult 2 k, m 0.7 MSM08c 05 0.11 1.32 factory 0.9 MSM10c 05 0.11 1.80 1.1 * 1% and 5% available ** k = 100ppm/ c; m = 300ppm/ c standard electrical specifications parameter unit MSM series maximum operating voltage vdc 50 voltage coefficient of resistance v eff < 50ppm dielectric strength vac 200 min. insulation resistance ? 10,000m operating temperature range c - 55 to + 125 storage temperature range c - 55 to + 150 technical specifications body: molded epoxy. terminals: copper alloy, hot-solder dipped. solderability: per mil-prf-83401. mechanical specifications
www.vishay.com 59 MSM vishay dale document number: 31514 revision 05-aug-02 for technical questions, contact: ff2aresistors@vishay.com model MSM06 MSM08 MSM10 "a" profile "c" profile dimensions in inches [millimeters] a001* a001* resistance value g g tolerance k k characteristic f= 1% g= 2% j= 5% h h schematic "a" profile m8340107 = 6 pin sip rz070 m8340108 = 8 pin sip rz080 m8340109 = 10 pin sip rz090 05 schematic 01, 03 schematics k= 100ppm/ c m= 300ppm/ c ordering information - military part number "a" profile m8340107 "c" profile m8340104 detail spec. no. c or g c or g schematic "c" profile m8340104 = 6 pin sip rz040 m8340105 = 8 pin sip rz050 m8340106 = 10 pin sip rz060 k k characteristic k= 100ppm/ c m= 300ppm/ c the first three digits are significant figures. the last digit specifies number of zeros to follow. 1003 1003 resistance value f= 1% g= 2% j= 5% g g tolerance "a" profile m8340107 = 6 pin sip rz070 m8340108 = 8 pin sip rz080 m8340109 = 10 pin sip rz090 "a" profile m8340107 "c" profile m8340104 detail spec. no. "c" profile m8340104 = 6 pin sip rz040 m8340105 = 8 pin sip rz050 m8340106 = 10 pin sip rz060 m83401 assigned code for values of r 1 and r 2 . * the h schematic resistance values are specified by a 4-digit code, which comes from mil-r-83401. the codes and corresponding resistance values are: example: m8340107ka001gh = a low profile single-in-line resistor network with 6 pins, a tcr of 100ppm/ c, r 1 resistance value of 82 ohm, r 2 resistance value of 130 ohm, tolerance of 2% and "h" sche- matic. example : m8340107k1003gc = a low profile single-in-line resistor network with 6 pins and a tcr of 100ppm/ c, resistance value of 100 kilohm, tolerance of 2% and a "c" schematic. example: m8340104ka001gh = a high profile single-in-line resistor network with 6 pins, a tcr of 100ppm/ c, r 1 resistance value of 82 ohm, r 2 resistance value of 130 ohm, tolerance of 2% and "h" schematic. example : m8340104k1003gg = a high profile single-in-line resistor network with 6 pins and a tcr of 100ppm/ c, resistance value of 100 kilohm, tolerance of 2% and "g" schematic. thick film resistor networks, military, mil-prf-83401 - type rz 0.098 max. [2.49 max.] 0.012 0.004 [0.305 0.102] 0.098 max. [2.49 max.] 0.012 0.004 [0.305 0.102] 0.017 0.004 [0.432 0.102] b c equals spaces 0.342 + 0.008 - 0.010 [8.69 + 0.203 - 0.254] 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254] 0.040 + 0.009 - 0.015 [1.02 + 0.229 - 0.381] 0.100 0.005 [2.54 0.127] non-accumulative 0.030 + 0.005 - 0.015 [0.762 + 0.127 - 0.381] a pin # 1 0.100 0.005 [2.54 0.127] non-accumulative 0.040 + 0.009 - 0.015 [1.02 + 0.229 - 0.381] 0.017 0.004 [0.432 0.102] 0.135 + 0.015 - 0.010 [3.43 + 0.381 - 0.254] 0.030 + 0.005 - 0.015 [0.762 + 0.127 - 0.381] b c equal space 0.187 + 0.008 - 0.010 [4.75 + 0.203 - 0.254] a pin # 1 b 0.500 [12.70] 0.700 [17.78] 0.900 [22.86] a 0.583 0.015 [14.81 0.381] 0.783 0.015 [19.89 0.381] 0.983 0.015 [24.97 0.381] c 5 7 9 r 1 (ohms) code r 2 (ohms) 130 200 210 260 240 390 82 120 130 160 180 180 a001 a002 a003 a004 a005 a006 r 1 (ohms) code 3k 180 270 560 560 620 r 2 (ohms) 6.2k 270 270 560 1.2k 2.7k a013 a014 a015 a016 a017 a018 r 1 (ohms) r 2 (ohms) 270 330 390 470 680 3.3k 220 220 330 330 330 1.5k code a007 a008 a009 a010 a011 a012
document number: 31514 revision 05-aug-02 www.vishay.com 60 MSM vishay dale for technical questions, contact: ff2aresistors@vishay.com "a" profile 1.08 0.12 power rating (watts) ambient temperature c 1.00 1.40 1.80 0.20 0.60 0.48 0.36 0.12 0.20 1.00 0.80 "c" profile 1.80 1.32 0.88 0.11 "a" profile 1.08 0.84 0.60 0.07 "c" profile MSM10a package MSM08a package MSM06a package single resistor MSM10c package MSM08c package MSM06c package single resistor MSM10a package MSM08a package MSM06a package single resistor single resistor MSM06c package MSM10c package MSM08c package MSM10c package MSM08c package MSM06c package single resistor single resistor MSM06a package MSM08a package MSM10a package 01 schematic 05 schematic - 55 0 + 25 + 70 + 125 + 150 0.60 0.84 0.60 derating 03 schematic " a" profile "c" profile thick film resistor networks, military, mil-prf-83401 - type rz - 55 0 + 25 + 70 + 125 + 150 - 55 0 + 25 + 70 + 125 + 150 - 55 0 + 25 + 70 + 125 + 150 - 55 0 + 25 + 70 + 125 + 150 - 55 0 + 25 + 70 + 125 + 150 power rating (watts) ambient temperature c power rating (watts) ambient temperature c power rating (watts) ambient temperature c power rating (watts) ambient temperature c power rating (watts) ambient temperature c
www.vishay.com 61 MSM vishay dale document number: 31514 revision 05-aug-02 for technical questions, contact: ff2aresistors@vishay.com test power conditioning thermal shock short time overload low temperature operation moisture resistance resistance to soldering heat shock vibration load life terminal strength insulation resistance dielectric withstanding voltage conditions 1.5 x rated power, applied 1.5 hours on and 0.5 hour off for 100 hours 4 hours at + 25 c ambient temperature 5 cycles between - 65 c and + 125 c 2.5 x rated working voltage 5 seconds 45 minutes at full rated working voltage at - 65 c 240 hours with humidity ranging from 80% rh to 98% rh leads immersed in + 260 c solder to within 1/16" of body for 10 seconds total of 18 shocks at 100 g's 12 hours at maximum of 20 g's between 10 and 2,000 hz 1000 hours at + 70 c, rated power applied 1.5 hours on, 0.5 hour off for full 1000 hour period 4 1/2 pound pull for 30 seconds 10,000 megohm (minimum) no evidence of arcing or damage (200 v rms for 1 minute) max. ? r (typical test lots) 0.50% ? r 0.50% ? r 0.25% ? r (characteristic k) 0.50% ? r (characteristic m) 0.25% ? r (characteristic k) 0.50% ? r (characteristic m) 0.50% ? r 0.25% ? r 0.25% ? r 0.25% ? r 0.50% ? r (characteristic k) 2.00% ? r (characteristic m) 0.25% ? r performance 01 schematic 03 schematic 05 schematic circuit application 3, 4 or 5 isolated resistors "a" profile "c" profile MSM06a-03 (m8340107xxxxxxg) MSM06c-03 (m8340104xxxxxxg) MSM08a-03 (m8340108xxxxxxg) MSM08c-03 (m8340105xxxxxxg) MSM10a-03 (m8340109xxxxxxg) MSM10c-03 (m8340106xxxxxxg) the MSM06a-03, MSM08a-03, MSM10a-03, MSM06c-03, MSM08c-03 and MSM10c-03 molded single-in-line resistor networks provide the user with a choice of 3, 4 or 5 nominally equal resistors. each resistor is isolated from all others. commonly used in the following applications: ? "wired or" pull-up ? long-line impedance balance ? power driven pull-up ? led current limiting ? power gate pull-up ? ecl output pull-down ? line termination ? ttl input pull-down 1 2 3 n-1 n r 2 r 1 1 2 3 4 n-1 n 5, 7 or 9 resistors with one pin common "a" profile "c" profile MSM06a-01 (m8340107xxxxxxc) MSM06c-01 (m8340104xxxxxxc) MSM08a-01 (m8340108xxxxxxc) MSM08c-01 (m8340105xxxxxxc) MSM10a-01 (m8340109xxxxxxc) MSM10c-01 (m8340106xxxxxxc) the MSM06a-01, MSM08a-01, MSM10a-01, MSM06c-01, MSM08c-01 and MSM10c-01 molded single-in-line resistor networks provide the user with a choice of 5, 7 or 9 nominally equal resistors, each connected to a common pin (pin no. 1). commonly used in the following applications: ? "wired or" pull-up ? open collector pull-up ? power gate pull-up ? ttl input pull-down ? mos/rom pull-up/pull-down ? ttl unused gate pull-up 4, 6 or 8 isolated resistors "a" profile "c" profile MSM06a-05 (m8340107xxxxxxh) MSM06c-05 (m8340104xxxxxxh) MSM08a-05 (m8340108xxxxxxh) MSM08c-05 (m8340105xxxxxxh) MSM10a-05 (m8340109xxxxxxh) MSM10c-05 (m8340106xxxxxxh) the MSM06a-05, MSM08a-05, MSM10a-05, MSM06c-05, MSM08c-05 and MSM10c-05 molded single-in-line resistor networks provide the user with a choice of 4, 6 or 8 pair of r 1 /r 2 resistor values for pulse squaring and ttl dual-line terminating requirements. 1 2 3 n-1 n thick film resistor networks, military, mil-prf-83401 - type rz
|
