View B173RW01V3_2083752.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 ( ) preliminary specifications ( ) final specifications module 17.3 (17.26) hd+ 16:9 color tft-lcd with led backlight design model name b173rw01 v3 (h/w:5a) note ( ) led backlight with driving circuit design customer date checked & approved by date note: this specification is subject to change without notice. approved by date beyond yang 07/20/2009 prepared by buffy chen 10/24/2009 nbbu marketing division / au optronics corporation www..net
2 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 contents 1. handling precautions ............................ ................................................... ........ 4 2. general description............................. ................................................... .......... 5 2.1 general specification .......................... ................................................... ............................5 2.2 optical characteristics ........................ ................................................... ............................6 3. functional block diagram........................ ................................................... ... 11 4. absolute maximum ratings ........................ ................................................... 12 4.1 absolute ratings of tft lcd module............. ................................................... ...............12 4.2 absolute ratings of environment................ ................................................... ..................12 5. electrical characteristics ...................... ................................................... ....... 13 5.1 tft lcd module ................................. ................................................... ..............................13 5.2 backlight unit ................................. ................................................... ..................................15 5.2.1 led characteristics .......................... ................................................... .............................15 6. signal characteristic ........................... ................................................... ........ 16 6.1 pixel format image ............................. ................................................... ............................16 6.2 the input data format .......................... ................................................... ..........................17 6.3 integration interface and pin assignment ....... ................................................... ...........18 6.3.1 connector description ........................ ................................................... ........................18 6.4 interface timing............................... ................................................... ................................21 7. vibration and shock test........................ ................................................... ..... 23 7.1 vibration test................................. ................................................... ...................................23 7.2 shock test spec:............................... ................................................... ...............................23 7.3. reliability................................... ................................................... .......................................23 8. mechanical characteristics...................... ................................................... .. 24 8.1 lcm outline dimension.......................... ................................................... ........................24 8.2 screw hole depth and center position ........... ................................................... ............27 9. shipping and package ............................ ................................................... ... 28 9.1 shipping label format .......................... ................................................... .........................28 9.2. carton package ................................ ................................................... ............................29 9.3 shipping package of palletizing sequence ....... ................................................... ........29 10. appendix: edid description ..................... ................................................... . 30 www..net
3 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 record of revision version and date page old description new description remark 0.1 2009/10/24 all preliminary edition for custome r www..net
4 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 1. handling precautions 1) since front polarizer is easily damaged, pay attent ion not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with abso rbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or c rack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an en closure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideratio n that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) small amount of materials having no flammability gr ade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source (iec60950 or ul1950), or be applied ex emption. 13) disconnecting power supply before handling lcd modu les, it can prevent electric shock, do not touch the electrode parts, cables, co nnectors and led circuit part of tft module that a led light bar build in as a light source of back light unit. it can prevent electros tic breakdown. www..net
5 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 2. general description b173rw01 v3 is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and led backlight system. the scr een format is intended to support the 16:9 hd+ (1600(h) x 900(v)) screen and 262k colors (rgb 6-bits data driver) with led backlight driving circuit. all input signals are lv ds interface compatible. b173rw01 v3 is designed for a display unit of noteb ook style personal computer and industrial machine. 2.1 general specification the following items are characteristics summary on the table at 25 condition: items unit specifications screen diagonal [mm] 438.38 active area [mm] 382.08 x 214.92 pixels h x v 1600x3(rgb) x 900 pixel pitch [mm] 0.2388x0.2388 pixel format r.g.b. vertical stripe display mode normally white white luminance (i led =20ma) (note: i led is led current) [cd/m 2 ] 220 typ. (5 points average) 187 min. (5 points average) luminance uniformity 1.25 max. (5 points) 1.53 max. (13 points) contrast ratio 500:1 response time [ms] 8 typ/16max nominal input voltage vdd [volt] +3.3 typ. power consumption [watt] 6.5 max. (include logic and blu power) weight [grams] 570 max. min. typ. max. length 397.6 398.1 398.6 width 232.3 232.8 233.3 physical size without inverter, bracket. [mm] thickness - - 5.8 electrical interface 2 channel lvds glass thickness [mm] 0.5 surface treatment glare support color 262k colors ( rgb 6-bit ) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance www..net
6 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 2.2 optical characteristics the optical characteristics are measured under stab le conditions at 25 (room temperature) : item symbol conditions min. typ. max. unit note white luminance iled=20ma 5 points average 187 220 - cd/m 2 1, 4, 5. r l horizontal (right) cr = 10 (left) 40 40 45 45 - - degre e viewing angle h l vertical (upper) cr = 10 (lower) 10 30 15 35 - - 4, 9 luminance uniformity 5p 5 points - - 1.25 1, 3, 4 luminance uniformity 13p 13 points - - 1.53 2, 3, 4 contrast ratio cr 400 500 - 4, 6 cross talk % 4 4, 7 t r rising - 2 - t f falling - 6 - response time t rt rising + falling - 8 16 msec 4, 8 rx 0.590 0.620 0.650 red ry 0.310 0.340 0.370 gx 0.295 0.325 0.355 green gy 0.540 0.570 0.600 bx 0.120 0.150 0.180 blue by 0.030 0.060 0.090 wx 0.283 0.313 0.343 color / chromaticity coodinates white wy 0.299 0.329 0.359 ntsc % cie 1931 - 60 - 4 www..net
7 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 note 1 : 5 points position (ref: active area) 1 2 3 4 5 h /4 h /4 h /4 h /4 h w w /4 w /4 w /4 w /4 note 2 : 13 points position (ref: active area) w /4 w w /4 h h /4 h /4 h /4 h /4 7 9 1 0 w /4 1 8 w /4 1 0 1 0 1 0 1 0 2 3 1 3 1 2 4 5 6 1 1 note 3 : the luminance uniformity of 5 or13 points is defi ned by dividing the maximum luminance values by the minimum test point luminance note 4 : measurement method the lcd module should be stabilized at given temper ature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after w13 = maximum brightness of thirteen points minimum brightness of thirteen points maximum brightness of five points w5 = minimum brightness of five points www..net
8 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 lighting backlight for 30 minutes in a stable, wind less and dark room, and it should be measured in th e center of screen. note 5 definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the poin t x at figure in note (1). note 6 definition of contrast ratio: contrast ratio is calculated with the following for mula. note 7 definition of cross talk (ct) ct = | y b C y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) center of the screen tft - lcd module 50 cm photo detector lcd panel field=2 contrast ratio (cr)= brightness on the ?white? state brightness on the ?black? state www..net
9 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 note 8 : definition of response time: the output signals of bm-7 or equivalent are measur ed when the input signals are changed from black to white (falling time) and from white to blac k (rising time), respectively. the response time i nterval between the 10% and 90% of amplitudes. refer to fig ure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% www..net
10 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 note 9 . definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles) . the 180 viewing angle range is broken down as follows; 90 () horizontal left and right and 90 () vertical, high (up) and low (down). the measure ment direction is typically perpendicular to the display surface with the screen rotated about its center t o develop the desired measurement viewing angle. www..net
11 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 3. functional block diagram the following diagram shows the functional block of the 17.3 inches wide color tft/lcd 40 pin. www..net
12 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 4. absolute maximum ratings an absolute maximum rating of the module is as foll owing: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/lcd drive vin -0.3 +4.0 [volt] note 1,2 4.2 absolute ratings of environment item symbol min max unit conditions operating top 0 +50 [ o c] note 4 operation humidity hop 5 95 [%rh] note 4 storage temperature tst -20 +60 [ o c] note 4 storage humidity hst 5 95 [%rh] note 4 note 1: at ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: led specification refer to section 5.2 note 4: for quality performance, please refer to au o iis (incoming inspection standard). twb=39c operating range storage range www..net
13 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; the power specification are measured under 25 and frame frenquency under 60hz symble parameter min typ max units note vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] pdd vdd power - - 1.6 [watt] note 1/2 idd idd current - 350 450 [ma] note 1/2 irush inrush current - - 2000 [ma] note 3 vddrp allowable logic/lcd drive ripple voltage - - 100 [mv] p-p note 1 : maximum measurement condition black pattern at 3.3v driving voltage. (p max =v 3.3 x i black ) note 2 measure condition 90% 10% vin rising time 0v 3.3v 0.5ms www..net
14 of 33 au optronics corporation product specification b173rw01 v3 document version : 0.1 5.1.2 signal electrical characteristics i nput signals shall be low or high-impedance state w hen vdd is off. signal electrical characteristics are as follows; parameter condition min max unit vth differential input high threshold (vcm=+1.2v) - 100 [mv] vtl differential input low threshold (vcm=+1.2v) -100 - [mv] v id differential input voltage 100 600 [mv] vcm differential input common mode voltage 1.125 1.375 [v] note: lvds signal waveform www..net
15 of 33 au optronics corporation product specification 5.2 backlight unit 5.2.1 led characteristics parameter symbol min typ max units condition backlight power consumption pled - 4.2 4.5 [watt] (ta=25 ), note 1 vin =12v led life-time n/a 10,000 - - hour (ta=25 ), note 2 i f =20 ma note 1: calculator value for reference p led = vf (normal distribution) * if (normal distributi on) / efficiency note 2: the led life-time define as the estimated time to 50% degradation of initial luminous. 5.2.2 backlight input signal characteristics parameter symbol min typ max units remark led power supply vled 7 -- 21 [volt] led enable input high level 3 - 5.5 [volt] led enable input low level vled_en - - 0.8 [volt] pwm logic input high level 3 - 5.5 [volt] pwm logic input low level vpwm_en - - 0.8 [volt] pwm input frequency fpwm 100 1k 20k hz pwm duty ratio duty 5 -- 100 % define as connector interface (ta=25 ) www..net
16 of 33 au optronics corporation product specification 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the inpu t signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 1 1600 1st line 900th line www..net
17 of 33 au optronics corporation product specification 6.2 the input data format signal name description r5 r4 r3 r2 r1 r0 red data 5 (msb) red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) red-pixel data red-pixel data each red pixel's brightness data consists of these 6 bits pixel data. g5 g4 g3 g2 g1 g0 green data 5 (msb) green data 4 green data 3 green data 2 green data 1 green data 0 (lsb) green-pixel data green-pixel data each green pixel's brightness data consists of thes e 6 bits pixel data. b5 b4 b3 b2 b1 b0 blue data 5 (msb) blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) blue-pixel data blue-pixel data each blue pixel's brightness data consists of these 6 bits pixel data. rxclkin data clock the signal is used to strobe the pixel data and de signals. all pixel data shall be valid at the falling edge when the de signal is high de display timing this signal is strobed at the fal ling edge of rxclkin. when the signal is high, the pixel data sh all be valid to be displayed. vs vertical sync the signal is synchronized to rxcl kin . hs horizontal sync the signal is synchronized to rx clkin . note: output signals from any system shall be low o r high-impedance state when vdd is off. www..net
18 of 33 au optronics corporation product specification 6.3 integration interface and pin assignment 6.3.1 connector description physical interface is described as for the connecto r on module. these connectors are capable of accommodating the f ollowing signals and will be following components. connector name / designation for signal connector manufacturer ipex or compatible type / part number 20455-040e-12r or compatible mating housing/part number ipex 20353-040t-11 or co mpatible 6.3.2 pin assignment lvds is a differential signal technology for lcd in terface and high speed data transfer device. pin# signal name description 1 nc no connection 2 vdd power supply +3.3v 3 vdd power supply +3.3v 4 vedid edid +3.3v power 5 nc no connect (reserve for m1 aging) 6 clkedid edid clock input 7 dataedid edid data input 8 rxoin0- -lvds differential data input(odd r0-r5,g 0) 9 rxoin0+ +lvds differential data input(odd r0-r5,g 0) 10 vss ground 11 rxoin1- -lvds differential data input(odd g1-g5, b0-b1) 12 rxoin1+ +lvds differential data input(odd g1-g5, b0-b1) 13 vss ground 14 rxoin2- -lvds differential data input(odd b2-b5, hs,vs,de) 15 rxoin2+ +lvds differential data input(odd b2-b5, hs,vs,de) 16 vss ground 17 rxockin- -lvds odd differential clock input 18 rxockin+ +lvds odd differential clock input 19 vss ground 20 rxein0- -lvds differential data input(even r0-r5 ,g0) 21 rxein0- +lvds differential data input(even r0-r5 ,g0) 22 vss ground 23 rxein1- -lvds differential data input(even g1-g5 ,b0-b1) www..net
19 of 33 au optronics corporation product specification 24 rxein1+ +lvds differential data input(even g1-g5 ,b0-b1) 25 vss ground 26 rxein2- -lvds differential data input(even b2-b5 ,hs,vs,de) 27 rxein2+ +lvds differential data input(even b2-b5 ,hs,vs,de) 28 vss ground 29 rxeckin- -lvds even differential clock input 30 rxeckin+ +lvds even differential clock input 31 vled_gnd led ground 32 vled_gnd led ground 33 vled_gnd led ground 34 nc no connection 35 s_pwmin system pwm logic input level 36 led_en led enable input level 37 nc no connection 38 vled led power supply 39 vled led power supply 40 vled led power supply www..net
20 of 33 au optronics corporation product specification note1: input signals shall be low or high-impedance state when vdd is off. www..net
21 of 33 au optronics corporation product specification 6.4 interface timing 6.4.1 timing characteristics basically, interface timings should match the 1600x 900 /60hz manufacturing guide line timing. parameter symbol min. typ. max. unit frame rate - 50 60 - hz clock frequency 1/ t clock 50 53.90 85 mhz period t v 908 912 1500 active t vd 900 vertical section blanking t vb tbd tbd 600 t line period t h 840 985 1250 active t hd 800 horizontal section blanking t hb tbd tbd 450 t clock note : de mode only 6.4.2 timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 www..net
22 of 33 au optronics corporation product specification 6.5 power on/off sequence power on/off sequence is as follows. interface sign als and led on/off sequence are also shown in the chart. signals from any system shall b e hi-z state or low level when vdd is off note:if t3,t5,t6 couldnt match above specification s, must request t3+t5+t6 > 200ms at least power sequence timing value parameter min. max. units t1 0.5 10 t2 0 50 t3 200 - t4 200 - t5 0 50 t6 0 10 t7 500 - t8 10 - t9 10 180 t10 10 180 t11 10 - t12 0.5 10 ms www..net
23 of 33 au optronics corporation product specification 7. vibration and shock test 7.1 vibration test test spec: test method: non-operation acceleration: 1.5 g frequency: 10 - 500hz random sweep: 30 minutes each axis (x, y, z) 7.2 shock test spec: test spec: test method: non-operation acceleration: 220 g , half sine wave active time: 2 ms pulse: x,y,z .one time for each side 7.3. reliability items required condition note temperature humidity bias ta= 40 , 90%rh, 300h high temperature operation ta= 50 , dry, 300h low temperature operation ta= 0 , 300h high temperature storage ta= 60 , 35%rh, 300h low temperature storage ta= -20 , 50%rh, 300h thermal shock test ta=-20 to 60 , duration at 30 min, 100 cycles esd contact : 8 kv air : 15 kv note 1 note1: according to en 61000-4-2 , esd class b: some perf ormance degradation allowed. no data lost . self-recoverable. no hardware failures. remark: mtbf (excluding the led): 30,000 hours with a conf idence level 90% www..net
24 of 33 au optronics corporation product specification 8. mechanical characteristics 8.1 lcm outline dimension www..net
25 of 33 au optronics corporation product specification note: prevention ic damage, ic positions not allowe d any overlap over these areas. www..net
26 of 33 au optronics corporation product specification www..net
27 of 33 au optronics corporation product specification 8.2 screw hole depth and center position maximum screw penetration from side surface is 2.5m m (see drawing) screw hole center location, from front surface = 3. 10 0.3mm (see drawing) screw torque: maximum 2.5 kgf-cm www..net
28 of 33 au optronics corporation product specification 9. shipping and package 9.1 shipping label format www..net
29 of 33 au optronics corporation product specification 9.2. carton package 9.3 shipping package of palletizing sequence www..net
30 of 33 au optronics corporation product specification 10. appendix: edid description address function value value value note hex hex bin dec 00 header 00 00000000 0 01 ff 11111111 255 02 ff 11111111 255 03 ff 11111111 255 04 ff 11111111 255 05 ff 11111111 255 06 ff 11111111 255 07 00 00000000 0 08 eisa manuf. code lsb 06 00000110 6 09 compressed ascii af 10101111 175 0a product code 9e 10011110 158 0b hex, lsb first 13 00010011 19 0c 32-bit ser # 00 00000000 0 0d 00 00000000 0 0e 00 00000000 0 0f 00 00000000 0 10 week of manufacture 01 00000001 1 11 year of manufacture 13 00010011 19 12 edid structure ver. 01 00000001 1 13 edid revision # 03 00000011 3 14 video input def. (digital i/p, non-tmds, crgb) 80 10000000 128 15 max h image size (rounded to cm) 26 00100110 38 16 max v image size (rounded to cm) 15 00010101 21 17 display gamma (=(gamma*100)-100) 78 01111000 120 18 feature support (no dpms, active off, rgb, tmg blk#1) 0a 00001010 10 19 red/green low bits (lower 2:2:2:2 bits) c4 11000100 196 1a blue/white low bits (lower 2:2:2:2 bits) 95 10010101 149 1b red x (upper 8 bits) 9e 10011110 158 1c red y/ higher 8 bits 57 01010111 87 1d green x 53 01010011 83 1e green y 92 10010010 146 1f blue x 26 00100110 38 20 blue y 0f 00001111 15 21 white x 50 01010000 80 22 white y 54 01010100 84 23 established timing 1 00 00000000 0 24 established timing 2 00 00000000 0 www..net
31 of 33 au optronics corporation product specification 25 established timing 3 00 00000000 0 26 standard timing #1 01 00000001 1 27 01 00000001 1 28 standard timing #2 01 00000001 1 29 01 00000001 1 2a standard timing #3 01 00000001 1 2b 01 00000001 1 2c standard timing #4 01 00000001 1 2d 01 00000001 1 2e standard timing #5 01 00000001 1 2f 01 00000001 1 30 standard timing #6 01 00000001 1 31 01 00000001 1 32 standard timing #7 01 00000001 1 33 01 00000001 1 34 standard timing #8 01 00000001 1 35 01 00000001 1 36 pixel clock/10000 lsb f8 11111000 248 37 pixel clock/10000 usb 2a 00101010 42 38 horz active lower 8bits 40 01000000 64 39 horz blanking lower 8bits 90 10010000 144 3a horzact:horzblnk upper 4:4 bits 61 01100001 9 7 3b vertical active lower 8bits 84 10000100 132 3c vertical blanking lower 8bits 0c 00001100 12 3d vert act : vertical blanking (upper 4:4 bit) 30 00110000 48 3e horzsync. offset 30 00110000 48 3f horzsync.width 20 00100000 32 40 vertsync.offset : vertsync.width 36 00110110 54 41 horz&vert sync offset/width upper 2bits 00 00000000 0 42 horizontal image size lower 8bits 7e 01111110 126 43 vertical image size lower 8bits d6 11010110 214 44 horizontal & vertical image size (upper 4:4 bits) 10 00010000 16 45 horizontal border (zero for internal lcd) 00 00000000 0 46 vertical border (zero for internal lcd) 00 00000000 0 47 signal (non-intr, norm, no stero, sep sync, neg pol) 18 00011000 24 48 detailed timing/monitor 00 00000000 0 49 descriptor #2 00 00000000 0 4a 00 00000000 0 4b 0f 00001111 15 4c 00 00000000 0 www..net
32 of 33 au optronics corporation product specification 4d 00 00000000 0 4e 00 00000000 0 4f 00 00000000 0 50 00 00000000 0 51 00 00000000 0 52 00 00000000 0 53 00 00000000 0 54 00 00000000 0 55 00 00000000 0 56 00 00000000 0 57 00 00000000 0 58 00 00000000 0 59 20 00100000 32 5a detailed timing/monitor 00 00000000 0 5b descriptor #3 00 00000000 0 5c 00 00000000 0 5d fe 11111110 254 5e 00 00000000 0 5f manufacture 41 01000001 65 a 60 manufacture 55 01010101 85 u 61 manufacture 4f 01001111 79 o 62 0a 00001010 10 63 20 00100000 32 64 20 00100000 32 65 20 00100000 32 66 20 00100000 32 67 20 00100000 32 68 20 00100000 32 69 20 00100000 32 6a 20 00100000 32 6b 20 00100000 32 6c detailed timing/monitor 00 00000000 0 6d descriptor #4 00 00000000 0 6e 00 00000000 0 6f fe 11111110 254 70 00 00000000 0 71 manufacture p/n 42 01000010 66 b 72 manufacture p/n 31 00110001 49 1 73 manufacture p/n 37 00110111 55 7 74 manufacture p/n 33 00110011 51 3 75 manufacture p/n 52 01010010 82 r 76 manufacture p/n 57 01010111 87 w 77 manufacture p/n 30 00110000 48 0 www..net
33 of 33 au optronics corporation product specification 78 manufacture p/n 31 00110001 49 1 79 manufacture p/n 20 00100000 32 7a manufacture p/n 56 01010110 86 v 7b manufacture p/n 33 00110011 51 3 7c 20 00100000 32 7d 0a 00001010 10 7e extension flag 00 00000000 0 7f checksum 26 00100110 38 www..net

▲Up To Search▲

Price & Availability of B173RW01V3

	To Download B173RW01V3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .