*all brand names and product names are trademarks or re gistered trademarks of their respective companies. function this accessory tool connects an emulation pod and the target. it can be mounted on the same foot pattern as the mcu housed in the 42-pin 0.8mm-pitch ssop (42p2r-a) package. attaching procedure this converter can be used during debugging and board-mounted evaluation in common. when debugging (1) mount this dummy ic on the foot pattern. (2) mount a converter (e.g. m3t-flx-dct503) on top of (1). (3) then connect the emulation pod to the connector provided on the converter. also, when using an emulator mcu housed in the 42-pin 1.778mm-pitch sdip (42p4b or 42s1b-a), use the converter m3t-42dip-dms between the mcu and the M3T-DCT42B-450. during board-mounted evaluation attach the converter m3t-42dip-dms to the dummy ic (M3T-DCT42B-450) on the target system. * : position of no. 1 pin * when using the emulation pod m37515t-rpd, the converter m3t-flx-dct503 is required. dimensions ? denotes pin numbers on the m3t-dct42b 450. denotes pin numbers of the top of a connector. symbol term dimensions [mm] a fitting height 5.0 d package length 11.8 e package width 17.5 e interval in row of pins 0.8 foot pattern reference dimensions see appendix d "reference dimensional drawings for ssop package foot pattern made by matsushita electric works, ltd." [ordering information] see appendi x h "ordering information". M3T-DCT42B-450 direct dummy ic for 42-pin 0.8mm-pitch ssop
|
