original creation date: 04/29/96 last update date: 07/30/96 last major revision date: 04/29/96 mn54f378-x rev 1a0 military data sheet parallel d register with enable general description the f378 is a 6-bit register with a buffered common enable. this device is similar to the f174, but with common enable rather than common master reset. ns part numbers 54f378dm 54f378dmqb 54F378FMQB 54f378lmqb industry part number 54f378 prime die m378 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
military data sheet mn54f378-x rev 1a0 features - 6-bit high-speed parallel register - positive edge-triggered d-type inputs - fully buffered common clock and enable inputs - input clamp diodes limit high-speed termination effects - full ttl and cmos compatible 2
military data sheet mn54f378-x rev 1a0 (absolute maximum ratings) (note 1) storage temperature -65 c to +150 c ambient temperature under bias -55 c to +125 c junction temperature under bias -55 c to +175 c vcc pin potential to ground pin -0.5v to +7.0v input voltage (note 2) -0.5v to +7.0v input current (note 2) -30ma to +5.0ma voltage applied to output in high state (with vcc=0v) -0.5v to vcc standard output -0.5v to +5.5v tri-state output current applied to output in low state (max) twice the rated iol(ma) note 1: absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. functional operation under these conditions is not implied. note 2: either voltage limit or current limit is sufficient to protect inputs. recommended operating conditions free air ambient temperature 0 c to +70 c commercial -55 c to +125 c military supply voltage +4.5v to +5.5v military +4.5v to +5.5v commercial 3
mn54f378-x rev 1a0 military data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp range: -55 c to 125 c symbol parameter conditions notes pin- name min max unit sub- groups iih input high current vcc=5.5v, vm=2.7v 1, 3 inputs 20 ua 1, 2, 3 ibvi input high current vcc=5.5v, vm=7.0v 1, 3 inputs 100 ua 1, 2, 3 iil input low current vcc=5.5v, vm=0.5v, vinh=5.5v, vinl=0.0v 1, 3 inputs -0.6 ma 1, 2, 3 vol output low voltage vcc=4.5v, vil=0.8v, iol=20ma, vih=2.0v, vinl=0.0v 1, 3 outputs 0.5 v 1, 2, 3 voh output high voltage vcc= 4.5v, vih=2.0v, ioh=-1.0ma, vinh=5.5v 1, 3 outputs 2.5 v 1, 2, 3 ios short circuit current vcc=5.5v, vinh=5.5v, vinl=0.0v, vm=0.0v 1, 3 outputs -60 -150 ma 1, 2, 3 vcd input clamp diode voltage vcc=4.5v, im=-18ma 1, 3 inputs -1.2 v 1, 2, 3 icc supply current vcc=5.5v, vinh=5.5v, vinl=0.0v 1, 3 vcc 45 ma 1, 2, 3 icex output high leakage current vcc=5.5v, vinh=5.5v, vinl=0.0v, vm=5.5v 1, 3 outputs 250 ua 1, 2, 3 4
mn54f378-x rev 1a0 military data sheet electrical characteristics ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs symbol parameter conditions notes pin- name min max unit sub- groups tplh propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 5 cp to qn 3.0 7.5 ns 9 2, 5 cp to qn 3.0 10.5 ns 10, 11 tphl propagation delay vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 2, 5 cp to qn 3.5 8.5 ns 9 2, 5 cp to qn 3.5 10.5 ns 10, 11 ts(h/l)(1) setup time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 6 dn to cp 4.0 ns 9 6 dn to cp 5.0 ns 10, 11 th(h/l)(1) hold time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 6 dn to cp 0ns9 6 dn to cp 2.0 ns 10, 11 ts(h)(2) setup time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 6 e to cp 4.0 ns 9 6 e to cp 4.5 ns 10, 11 ts(l)(2) setup time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 6 e to cp 10.0 ns 9 6 e to cp 13.0 ns 10, 11 th(h/l)(2) hold time vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c 6 e to cp 0 ns 9, 10, 11 tw(h) pulse width vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c tr/tf=1.0ns 6 cp 4.0 ns 9 6 cp 5.0 ns 10, 11 tw(l) pulse width vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c tr/tf=1.0ns 6 cp 6.0 ns 9 6 cp 7.5 ns 10, 11 fmax maximum clock frequency vcc=5.0v @25c, vcc=4.5v & 5.5v @-55/125c tr/tf=1.0ns 6 80 mhz 9 6 70 mhz 10, 11 note 1: screen tested 100% on each device at +25c, +125c & -55c temperature, subgroups a1, 2, 3, 7 & 8. note 2: screen tested 100% on each device at +25c temperature only, subgroup a9. note 3: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c & -55c temperature, subgroups a1, 2, 3, 7 & 8. note 4: sample tested (method 5005, table 1) on each mfg. lot at +25c subgroup a9, and at +125c & -55c temperature, subgroups 10 & 11. note 5: sample tested (method 5005, table 1) on each mfg.lot at +125c, +25c & -55c temperature, subgroups a9, 10 & 11. note 6: guaranteed but not tested. (design characterization data) 5
|
