View 62GB-56TG14-22SN044_2223641.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 62 gb - series receptacles miniature bayonet lock connectors complies with mil -c -26482 ce -2ra a this miniature bayonet lock connector series offers designers important features not found in any other range of connectors. they are developed and manufactured entirely in the u.k. by amphenol ltd., and have full qualification approval to british standards specification bs 9522 f0017 and british defence specification def stan 59 -35 (part 3) sec. 7. amphenol this catalogue to be used in conjunction with catalogues: ce-2pa ? 62gb series plugs ce-2aa ? 62gb series accessories
2 62gb and pattern 608 new planforms current: (a) maximum current per individual contact (in isolation)* at ambient temperature of 85c contact size 12: 23 a (b) maximum current per contact through all contacts simultaneously at an ambient temperature of 85c contact size 12: 20 a current: (a) maxim um current per individual contact (in isolation)* at ambient temperature of 85c contact size 8: 45 a (b) maximum current per contact through all contacts simultaneously at an ambient temperature of 85c contact size 8: 40 a sea level 8500m (27,900ft) 21,340m (70,oooft) 1013 mbar ? 320 mbar 44 mbar voltage rating i ii iii i ii iii i ii iii working voltages ** 700 1200 1500 550 650 800 330 380 450 (nominal) d.c. or a.c. peak voltage proof 2100 3000 3000 1100 1300 1300 660 760 750 d.c. or a.c. peak * i.e. when only one contact per connector is electrically loaded. ? 1 mbar=10 2 n/m 2 =100 pa ** establishment of electrical safety factors is the responsibility of the user
contents page amphenol 62gb solder connectors 4 schedule of tests 5-6 connector styles available 7 insert availability 9-10 ordering 62gb series connectors 11-12 box mounting receptacles - table of styles 13-14 box mounting receptacles 15-19 single hole fixing receptacles - table of styles 20-22 single hole fixing receptacles 23-30 cable mounting receptacles - table of styles 31 cable mounting receptacles 32-34 insert orientations 35 key/ keyway orientations 36
4 amphenol ? 62gb solder connectors this miniature bayonet lock connector series offers designers important features not found in any other range of connectors. the range has full qualification approval to british standards specification bs 9522 foo 17 and british defence specification def stan 59 -35 (part 3) sec. 7. 62gb series connectors - de veloped and manufactured entirely in the united kingdom by amphenol limited. they are the first and only british connectors to have achieved this. a doubly strong position which amphenol are well geared to handle. the manufacturing facilities of the whitstable plant have been cited as exemplary in europe. certainly the layout is extensive and extremely efficient; safety awards have been attained every time returns have been submitted to the british safety council. 62gb series connectors have been well established with government authorities on an international scale and users can be found in sweden, denmark, norway, finland, germany, spain, holland, india, canada and italy. derating connectors must be derated under the following operating conditions: 1. at elevated ambient temperatures, the current ratings are reduced so that total maximum hot spot temperature of 125c is not exceeded. 2. at high altitudes, revised voltage ratings become effective as shown on page 7. 3. when connectors to different s pecifications are intermated (e.g. bs 9522 foo 17 and mil -c26482), the combination must not be operated under conditions more severe than the less stringent clause of either specification. amphenol 62gb connectors are designed to meet the most stringent requirements of both specifications. military specifications british standards specification bs 9522 foo 17 closely corresponds to the united states military specification mil -c -26482 solder terminations. certain differences exist between the schedules which can be seen on pages 2 and 3. approved gauges are used to check interchangeability of 62gb series with other connectors manufactured to bs 9522 foo 17 or mil -c -26482. basic construction connector shells are machined from solid aluminium bar stock - not forged or extruded as in competitive designs. machining has inherent advantages in terms of strength and adaptability. 62gb series can be supplied in brass or stainless steel, for instance. the normal shell finish used, which has a high resistance to corrosion, is zinc cobalt olive drab. other finishes may be supplied to special order, such as cadmium plate which is available by adding deviation (714) to the end of part number. inserts are of polychloroprene rubber compounded to an amphenol specification. operating temperature range is -55c to 125c, and the connectors have gold -plated contacts designed for soldered connections. configurations for size 20 contacts range between 2 contacts in the size 8 12.7mm (0.5in diameter) shell up to a maximum of 61 contacts in the size 2436.1 mm (1.5in diameter) shell. intermediate sizes, and contact data for heavier current ratings are shown in the insert availability chart on page 6 and 7. hermetic connectors with glass sealed dialectric are manufactured with mild steel shells and nickel iron contacts plated tin over copper. * other finishes are available on request. protection against mis -mating or cross -plugging in bs 9522 foo 17 positive shell -to -shell keying is provided with keys and keyways in a choice of either the normal (n) or any of the four preferred alternate positions: b, c, e and f. this prevents mismating between shells of different orientations and overcomes the difficulties associated with rotated inserts and a standard key -keyway orientati on. in the latter system, damage to the inserts or contacts can result if excessive force is used to engage non -mating pairs. rotated inserts are, however, permissible in bs 9522 foo 17 connectors if required to mate with or replace units to mil -c -26482 m ounted in existing equipment. connectors have normal orientations manufactured to bs 9522 foo 17 or mil -c -26482 are fully intermateable as also are connectors with inserts in positions w, x, y or z. 1 this catalogue to be used in conjunction with catalogues: ce-2pa ? 62gb series receptacles ce-2aa ? 62gb series accessories
5 schedule of tests required for qualification approval tests visual examination dimensions, outline mass(including contacts) compatability gauging procedure polarization engaging and separating force, connector contact holding force sealing (air pressure) sealing hermetic contact resistance housing (shell) continuity insulation resistance voltage proof soldering bumping vibration shock acceleration (steady state) rapid change of temperature climatic sequence flammability damp heat (steady state) brief description engagement max: 0,90 nm (8.0 lbf.in.) to 4,97 nm (44 lbf.in.) according to shell size. separation min: 0,22 nm (2.0 lbf.in.) to 1,58 nm (14.0 lbf.in.) according to shell size. 0,21 n (0.047 lbf) min.size 20 0,56 n (0.126 lbf)min. size 16 max leakage 28,53 unm/s (1 cm3/h), 1 bar (14.5 p.s.i.) differential. hermetic receptacles have a max leak of 0.1 micron cubic foot per hour (1 x 10 -6cm3/s) 5 milliohms max. 200 milliohms max. 5 milliohms max. grounding spring styles. 5,000 megaohms at 500 - 50 v d.c. see page 7. duration 1 minute as bs 9520: 1974, clause 1.2.6.6, method 2. as bs 9520: 1974, clause 1.2.6.1. 4,000 -10 bumps / 390m / s2 (40 gn). as bs 9520: 1974, clause 1.2.6.2.1. procedure a. 10 hz to 5000 hz, 0.75 mm / 10 gn. as bs 9520: 1974, clause 1.2.6.3. 981 m/s2 (100 g n). as bs 9520: 1974, clause 1.2.6.4. 490 m/s2 (50 gn). as bs 9520: 1974, clause 1.2.6.7. -550 c to - 1250 c. as bs 9520: 1974, clause 1.2.6.11. severity 55/125/56. as bs 9520: 1974, clause 1.2.6.8. direct flame applied, duration 1 minute. as bs 9520: 1974, clause 1.2.6.14. severity 56 days.
6 schedule of tests required for qualification approval tests brief description immersion (at low air pressure) mechanical endurance high temperature endurance mould growth salt mist dust robustness of terminations contact retention (in insert) insert retention (in shell) test prod damage impact grounding spring holding force plugs with grounding springs only. fluid resistance compass safe distance 3 cycles at 30 mins each cycle, total immersion in water at pressure 44 m bar. 500 operations minimum long term: 1,000 hrs. at 850 c ambient carrying the specified current. short term: 250 hrs at 1250 c, no current. as bs 9520: 1974, clause 1.2.6.15. 28 days duration. as bs 9520: 1974, clause 1.2.6.16. severity 1. as bs 9520: 1974, clause 1.2.6.17 exposure 30 minutes. 44,5 n (101bf) size 16 22,2 n (5 lbf) size 20 67,0 n (15 lbf) min. size 20 112,0 n (25 lbf) min. size 16 517 kn1m2 (751bf/in2) min. moment: 0,056 nm (0.5 lbf in) size 20 0,225 nm (2 lbf in) size 16 five impacts, drop height 1 m (3ft.3 in.). 1,17 n (0.263 lbf) to 2,74 n (0.616 lbf) according to size. immersion in 4 solvents and 9 fluids including aircraft fuels, lubricating oils and hydraulic fluids. as bs 9520: 1974, clause 1.2.5.11. 127 mm (5.0 in) min.
7 connector styles available receptacles box mounting see pages 13-19 accessories see catalogue ce-2aa single hole mounting see pages 20-30 cable mounting see pages 31-34 hermetic seal see pages 19 & 26
8
9 insert availability notes * this insert arrangement is not included in b.s. spec., but is available and. listed in mil -c -26482. ? due to the arrangement of contacts in the 14 -12 insert arrangement it is classified, for current derating, in the shell size range 18 -24. lettering of inserts shown above corresponds to view of front (mating surface of pin inserts or rear face (cable accessory end) of socket inserts. key ? no 16 size contacts o no 20 size contacts current rating maximum current per individual contact (in isolation) at a maximum ambient temperature of 85c: size 20 contact 7.5a size 16 contact 13 -oa the performance of 62gb series connectors at all times exceeds the maximum continuous bunched rating of the appropriate size wire, or cable of equivalent temperature rating. this bunched rating is therefore the determining factor. in the case of mixed loadings, the greatest individual load shall be the bunched loading. in any combination of ambient temperature plus temperature rise due to current flow through the contacts, the maximum connector internal hot spot temperature of 125c must not be exceeded. that is, when only one contact per connector is loaded.
10 insert availability voltage ratings altitude -thousands of feet (met res) relationship between flashover voltage and altitude for each voltage rating voltage ratings two categories of voltage rating are specified in bs9522 f0017, f0038 and n0001. rating 1 (700v d.c. working at sea -level) applicable to the high contact density inserts shown in the upper section of the insert availability diagram above. rating 2 (1200v d.c. working at sea -level) applicable to the inserts shown in the lower section of the insert availability diagram. altitude derating. information on voltage derating for operation at altitudes above sea -level can be obtained from the flashover voltage altitude curves on the left. 22 22 -55 d.c. working voltage a.c. working voltage r.m.s. proof voltage d.c. or a.c. peak rating 1 sea level 300 mb at 20c 8,500m (27,800 ft) 44 mb at 20c 20,000m (66,000 ft) rating 2 sea level 300 mb at 20c 8,500m (27,800 ft) 44 mb at 20"c 20,000m (66,000 ft) 700 550 330 120 0 650 380 500 390 230 850 460 270 2100 1100 660 3000 1300 760 24 altitude 24 -61
11 ordering 62gb series connectors to obtain the specific connector required write down the connector number from the typical example below. only inserts shown in the availability chart on p. 10&11 can be specified. all connectors are delivered with protective dust covers 62gb shell style 1 4 e environmental code a - plain shell, exposed solder buckets. no grommet e - insert seal and grommet seal with grommet nut (excluding 12e which has plain shell and no grommet or nut) f - as (e) but grommet nut has integral strain relief clamp h - hermetic seal no cable accessories j - as (e) but with resilient gland seal and nut for unscreened jacketed cable. no grommet supplied. see pp. 26 -27 for accessory to accept screened jacketed cable. p - potting construction complete with potting mould t - exposed solder buckets. threaded shell for cable accessories shell style 0 - receptacle wall mounting 1 - receptacle cable mounting 2 - receptacle box mounting 3 - receptacle, solder flange mounting 4 - receptacle, internally threaded with cable accessories as illustrated, for single hole mounting 6 - plug cable mounting 7 - receptacle, plain shell, single hole mounting specification key 1 - styles originally specified in mil -c -26482 5 - styles exclusive to bs9522 f0017 series designation 62 gb - aluminium shell 62 gb ss -stainless steel shell* 62 gb cu - brass shell* *consult factory for availability 62gb -xxh -hermetic mild steel shell. how to order from ms connector numbers connector numbers in the amphenol and ms numbering systems. only alternative insert orientations are specified in mil -c -26482 which does not include alternative key/keyway orientations. ms31 - 14 e 18 -11 p x 62gb - 14 e 18 -11 p x
12 ordering 62gb series connectors insert arrangement 18 11 p b (044) shell size (in sixteenths of an inch) 8, 10, 12, 14, 16 18,20,22,24 number of contacts 2, 3, 4, 5, 6, 7, 8, 10, 11, 12, 16, 19, 21', 23, 26, 32, 41, 55, 61 * consult factory for availability contact style p - pins s - sockets for hermetic connectors. p3 denotes pin contacts with solder bucket terminations. (standard range). p2 denotes pin contacts with flattened and pierced terminations. (special order). orientation (omit if normal orientation) keys/keyways: a', b, c, d', e. f, (see p. 31) inserts: w,x,y,z.(see p56/57) *inactive for new designs deviations (044) rough grip heavy duty coupling ring. (046) box mounting plug. (214)fitted with extension back shell and strain relief clamp without grommet on f types only (218) lever coupling ring (219)contacts for flexible punted wrung (57a and 12e only) (639) bright cadmium plated shells (345) contacts for flexible punted wiring 12h,13h 17h only (276) hermetics with gold plated contacts. (608) black anodise. (416) electroless nickel (714) cadmium plate olive drab how to order from b.s. connector numbers select the connector style by reference to bs9522 f0017 using the code below for identification. note that the b.s. specification includes only certain connectors from the table of styles as shown on pp. 8 & 9. alternative key/keyway orientations are preferred in the bs9522 f0017 specification to prevent mis -mating. however, rotated inserts are permissible where connectors are required to mate with or replace items to mil -c -26482 on existing equipment. 62gb - 14e c2098 18 -1 1 18 11 p m b b o style insert arrangement, see above m - pin contacts f - socket contacts alternative key/key way orientation variant. 0 ? standard connector
13 box mounting receptacles table of styles 62gb -50t page no. 15 62gb -10a 15 62gb -10e 16 62gb -10f 16 62gb -10j 17 62gb -10p 17 62gb -12e 18
14 page no. 62gb -12e(219) 18 62gb -12h hermetic seal 19 box mounting receptacles table of styles
15 shell size a max b 0.005 ( 0.13) c max sq. d tp sq. e dia. 0.010 ( 0.254) f 0 005 ( 0.13) g dia max. y dia. max. x thread 0.978 0.062 0.817 0.594 0120 0.445 0.434 0.473 08 24.84 1.58 20.75 15.09 3.05 11.3 11.02 12.02 7/16 ? 28 unef 0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.590 10 24.84 1.58 23.93 18.26 3.05 11.3 14.17 14.99 9/16 ? 24 nef 0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.750 12 24.84 1.58 26.32 20.63 3.05 11.3 17.35 19.05 11/16 - 24 nef 0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.875 14 24.84 1.58 28.70 23.10 3.05 11.3 20.52 22.23 13/16 ? 20 unef 0.978 0.062 1.223 0.969 0.120 0.445 0.933 1.000 16 24.84 1.58 31.07 24.61 3.05 11.3 23.7 25.4 15/16 ? 20 unef 0.978 0.062 1.317 1.062 0.120 0.445 1.057 1.125 18 24.84 1.58 33.45 26.58 3.05 11.3 26.85 28.58 1.1/16 - 18 nef 1.048 0.080 1.442 1.156 0.120 0.555 1.182 1.250 20 26.62 2.03 36.63 29.36 3.05 1410 30.02 31.75 1.3/16 - 18 nef 1.048 0.080 1.567 1.250 0.120 0.555 1.307 1.375 22 26.62 2.03 39.80 31.75 3.05 14.10 33.20 34.93 1.5/16 - 18 nef 1.048 0.080 1.692 1.375 0147 0.590 1.432 1.500 24 26.62 2.03 42.98 34.93 3.d4 14.99 36.37 38.1 1.7/16 ? 18 nef shell size a max. b 0.005 ( 0.13) c max. sq. d tp sq. e 0.010 ( 0.254) f 0.005 ( 0.13) g dia max. y dia. max. m 1.624 0.062 0.817 0.594 0.120 0.445 0.561 0.473 08 41.25 1.58 20.75 15.09 3.05 11.3 14.25 12.02 1/2 - 28 unef 1.624 0.062 0.942 0.719 0.120 0.445 0.686 0.590 10 41.25 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5/8 - 24 nef 1.624 0.062 1.036 0.812 0.120 0.445 0.811 0.750 12 41.25 1.58 26.32 20.63 3.05 11.3 20.60 19.05 3/4 - 20 unef 1.624 0.062 1.130 0.906 0.120 0.445 0.936 0.875 14 41.25 1.58 28.70 23.10 3.05 11.3 23.78 22.23 7/8 - 20 unef 1.624 0.062 1223 0.969 0.120 0.445 1.061 1.000 16 41.25 1.58 31.07 24.61 3.05 11.3 26.98 25.4 1 - 20 unef 1.624 0.062 1.317 1.062 0.120 0.445 1.186 1.125 18 41.25 1.58 33.45 26.58 3.05 11.3 30.12 28.58 1.3/16 - 18 nef 1 .687 0.080 1.442 1.156 0.120 0.555 1.311 1 250 20 42.85 2.03 36.63 29.36 3 05 14.10 33.30 31.75 1.3/16 - 18 nef 1.687 0.080 1.567 1.250 0.120 0.555 1.436 1.375 22 42.85 2.03 39.80 31.75 3.05 14.10 36.47 34.93 1.7/16 - 18 nef 1.730 0.080 1.692 1.375 0 147 0.590 1.561 1.500 24 43.94 2.03 42.98 34.93 3.73 14.99 39.65 38.1 1.7/16 - 18 nef box mounting receptacles 50t 62gb - 50t bs9522 -c2096 4 -hole flange mounting with threaded shell to accept standard cable accessories. 10a 62gb -10a 4 -hole flange mounting with general duty back shell. no grommet supplied.
16 box mounting receptacles 10e 62gb -10e mil -c -26482 ms3110e shell a b c d e f g v size max 0.005 max tp 0.010 0.005 dia dia. ( 0.13) sq. sq. ( 0.254) ( 0.13) max max 1.281 0.062 0.817 0.594 0.120 0.445 0.561 0.473 08 32.54 1 .58 20.75 15.09 3.05 11.3 14.25 12.02 1.281 0.062 0.942 0.719 0.120 0.445 0.686 0.590 10 32.54 1.58 23.93 18.26 3.05 11.3 17.43 14.99 1.281 0.062 1.036 0.812 0.120 0.445 0.811 0.750 12 32.54 1.58 26.32 20.63 3.05 11.3 20.60 19.05 1.281 0.062 1.130 0.906 0.120 0.445 0.936 0.875 14 32.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23 1.281 0.062 1.223 0.969 0.120 0.445 1.061 1.000 16 32.54 1.58 31.07 24.61 3.05 11.3 26.98 25.4 1.281 0.062 1.317 1.062 0.120 0.445 1.186 1.125 18 32.54 1.58 33.45 26.58 3.05 11.3 30.12 28.58 1.383 0.080 1.442 1.156 0.120 0.555 1.311 1.250 20 35.13 2.03 36.63 29.36 3.05 14.10 33.30 31.75 1.383 0.080 1.567 1.250 0.120 0.555 1.436 1.375 22 35.13 2.03 39.80 31.75 3.05 14.10 36.47 34.93 1 .383 0.080 1.692 1.375 0.147 0.590 1.561 1.500 24 35.13 2.03 42.98 34.93 3.74 14.99 39.65 38.1 10f 62gb -10f mil -c -26482 ms31 10f shell a b c d e f g h y size max. 0.005 max. tp 0.010 0.005 dia 0.005 dia. ( 0.13) sq. sq. ( 0.254) ( 0.13) max. ( 0.13) max. 1.762 0.062 0.817 0.594 0.120 0.445 0.828 0.156 0.473 08 44.76 1.58 20.75 15.09 3.05 11.3 21.03 3.96 12.01 1.762 0.062 0.942 0.719 0.120 0.445 0.891 0.188 0.590 10 44.76 1.58 23.92 18.26 3.05 11.3 22.63 4.78 14.99 1 .762 0.062 1.036 0.812 0.120 0.445 1.016 0.312 0.750 12 44.76 1.58 26.31 20.63 3.05 11.3 25.81 7.93 19.05 1.736 0.062 1.130 0.906 0.120 0.445 1.141 0.375 0.875 14 44.10 1.58 28.70 23.10 3.05 11.3 28.98 9.58 22.23 1.876 0.062 1.223 0.969 0.120 0.445 1.203 0.500 1.000 16 47.65 1.57 31.07 24.61 3.05 11.3 30.56 12.7 25.4 1.876 0.062 1.317 1.062 0.120 0.445 1.426 0.625 1.125 18 47.65 1.58 33.45 26.58 3.05 11.3 36.22 15.87 28.58 2.118 0.080 1.442 1.156 0.120 0.555 1.426 0.625 1.250 20 53.80 2.03 36.63 29.36 3.05 14.10 36.22 15.88 31.75 2.118 0.080 1.567 1.250 0.120 0.555 1.567 0.750 1.375 22 53.80 2.03 39.80 31.75 3.05 14.10 39.80 19.05 34.93 2.250 0.080 1.692 1.375 1.147 0.590 1.735 0.800 1.500 24 57.15 2.03 42.98 34.93 3.74 14.99 44.07 20.32 38.10 4 -hole flange mounting with grommet and grommet nut 4 -hole flange mounting with grommet and grommet nut fitted with integral strain relief clamp
17 box mounting receptacles shell size a max b 0.005 ( 0.13) c max.sq d tp sq e 0.010 ( 0.254) f 0.005 ( 0.13) g dia. max. y dia max z cable entry min max closed free 1.846 0.062 0.817 0.594 0.120 0.445 0.561 0.473 0.168 0.230 08 46.89 1.58 20.75 15.09 3.05 11.3 14.25 12.02 4.28 5.84 1.846 0.062 0.942 0.719 0.120 0.445 0.686 0.590 0.205 0.312 10 46.89 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5.21 7.93 1.947 0.062 1.036 0.812 0.120 0.445 0.811 0.750 0.338 0.442 12 49.45 1.58 26.32 20.63 3.05 11.3 20.60 19.05 8,59 11.23 2.147 0.062 1.130 0.906 0.120 0.445 0.936 0.875 0.416 0.539 14 54.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23 10.57 13.69 2.347 0.062 1.223 0.969 0.120 0.445 1.061 1.000 0.550 0.616 16 59.61 1.575 31.07 24.61 3.05 11.3 26.96 25.4 13.97 15.65 2.547 0.062 1.317 1.062 0.120 0.445 1.186 1.125 0.600 0.672 18 64.70 1.575 33.45 26.58 3.05 11.3 30.12 28.58 15.24 17.07 2.831 0.080 1.442 1.156 0.120 0.555 1.311 1.250 0.635 0.747 20 71.91 2.03 36.63 29.36 3.05 14.10 33.30 31.75 16.13 18.98 3.031 0.080 1.567 1.250 0.120 0.555 1.436 1.375 0.670 0.846 22 76.99 2.03 39.80 31.75 3.05 14.10 36.47 34.93 17.02 21.49 3.074 0.080 1.692 1.375 0.147 0.590 1.561 1.500 0.740 0.894 24 78.08 2.03 42.98 34.93 3.73 14.99 39.65 38.1 18.80 22.71 10p 62gb -10p 4 -hole flange mounting for potting shell size a max b 0.005 ( 0.13) c max.sq. d tp sq e 0.010 ( 0.254) f 0.005 ( 0.13) g dia. max y dia. max z dia. min 1.453 0.062 0.817 0.594 0.120 0.445 0.572 0.473 0.260 08 36.91 1.575 20.75 15.09 3.05 11.3 14.53 12.02 6.60 1.453 0.062 0.942 0.179 0.120 0.445 0.666 0.590 0.463 10 36.91 1.58 23.93 18.26 3.05 11.3 16.92 14.99 11.76 1.453 0.062 1.036 0.812 0.120 0.445 0.822 0.750 0.577 12 36.91 1.58 26.32 20.63 3.05 11.3 20.88 19.05 14.15 1.453 0.062 1.130 0.906 0.120 0.445 0.907 0.875 0.590 14 36.91 1.58 28.70 23.10 3.05 11.3 23.04 22.23 14.99 1.453 0.062 1.223 0.969 0.120 0.445 1.040 1.000 0.713 16 36.91 1.58 31.07 24.61 3.05 11.3 26.42 25.40 18.11 1.453 0.062 1.317 1.062 0.120 0.445 1.165 1.125 0.835 18 36.91 1.58 33.45 26.58 3.05 11.3 29.60 28.58 22.21 1.672 0.080 1.442 1.156 0.120 0.555 1.285 1.250 1.015 20 42.47 2.03 36.63 29.36 3.05 14.10 32.64 31.75 25.78 1.672 0.080 1.567 1.250 0.120 0.555 1.400 1.375 1.015 22 42.47 2.03 39.80 31.75 3.05 14.10 35.56 34.93 25.78 1.734 0.080 0.692 1.375 0.147 0.590 1.540 1.500 1.265 24 44.05 2.03 42.98 34.93 3.74 14.99 39.12 38.10 32.13 10j 4 -hole flange mounting w ith clamp for unscreened jacketed cable. no grommet supplied 62gb -10j
18 box mounting receptacles 12e 62gb -12e bs9522 - f0017 - c2097 mil -c -26482 ms3112e shell size a max 8 0.005 ( 0.13) c max sq. d tp sq. e 0 010 ( 0.254) f 0.005 ( 0.13) g dia. max. l v dia. max. 0.978 0.062 0.817 0.594 0.120 0.445 0.434 0.800 0.473 08 24.84 1.58 20.75 15.09 3.05 11.3 11.02 20.32 12.02 0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.800 0.590 10 24.84 1.58 23.93 18.26 3.05 11.3 14.17 20.32 14.99 0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.800 0.750 12 24.84 1.58 26.32 20.63 3.05 11.3 17.35 20.32 19.05 0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.800 0.875 14 24.84 1.58 28.70 23.10 3.05 11.3 20.52 20.32 22.23 0.978 0.062 1.223 0.969 0.120 0.445 0.933 0.800 1.000 16 24.84 1.58 31.07 24.61 3.05 11.3 23.70 20.32 25.4 0.978 0.062 1.317 1.062 0.120 0.445 1.057 0.800 1.125 18 24.84 1.58 33.45 26.58 3.05 11.3 26.85 20.32 28.58 1.048 0.080 1.442 1.156 0.120 0.555 1.182 0.875 1.250 20 26.62 2.03 36.63 29.36 3.05 14.10 30.02 22.23 31.75 1.048 0.080 1.567 1.250 0.120 0.555 1.307 0.875 1.375 22 26.62 2.03 39.80 31.75 3.05 14.10 33.20 22.23 34.93 1 .048 0.080 1.692 1.375 0.147 0.590 1.432 0.875 1.500 24 26.62 2.03 42.98 34.93 3.74 14.99 36.37 22.23 38.1 bs9522 - f0017 - c2262 k l shell size a max b 0.005 (0.13) c max sq. d tp sq. e dia 0.010 f 0.005 ( 0.13) g dia. max j 0.020 ( 0.51) min max. max min y dia max. z 0.982 0.062 0.817 0.594 0.120 0.445 0.434 0.089 0.030 0.028 0.198 0.166 0.473 0.800 08 24.95 1.58 20.75 15.09 3.05 11.3 11.02 2.26 0.76 0.70 5.03 4.22 12.02 20.32 0.982 0.062 0.942 0.719 0.120 0.445 0.558 0.089 0.030 0.028 0.198 0.166 0.590 0.800 10 24.95 1.58 23.93 18.26 3.05 11.3 14.17 2.26 0.76 0.70 5.03 4.22 14.99 20.32 0.982 0.062 1.036 0.812 0.120 0.445 0.683 0.089 0.030 0.028 0.198 0.166 0.750 0.800 12 24.95 1.58 26.32 20.63 3.05 11.3 17.35 2.26 0.76 0.70 5.03 4.22 19.05 20.32 0.982 0.062 1.130 0.906 0.120 0.445 0.808 0.089 0.030 0.028 0.198 0.166 0.875 0.800 14 24.95 1.58 28.70 23.10 3.05 11.3 20.52 2.26 0.76 0.70 5.03 4.22 22.23 20.32 0.982 0.062 1.223 0.969 0.120 0.445 0.933 0.089 0.030 0.028 0.198 0.166 1.000 0.800 16 24.95 1 .58 31.07 24.61 3.05 11.3 23.70 2.26 0.76 0.70 5.03 4.22 25.4 20.32 0.982 0.062 1.317 1.062 0.120 0.445 1.057 0.089 0.030 0.028 0.198 0.166 1.125 0.800 18 24.95 1.58 33.45 26.58 3.05 11.3 26.85 2.26 0.76 0.70 5.03 4.22 28.58 20.32 1.057 0.080 1.442 1.156 0.120 0.555 1.182 0.076 0.030 0.028 0.185 0.153 1.250 0.875 20 26.85 2.03 36.63 29.36 3.05 14.10 30.02 1.93 0.76 0.70 4.70 3.89 31.75 22.23 1.057 0.080 1.567 1.250 0.120 0.555 1.307 0.076 0.030 0.028 0.185 0.153 1.375 0.875 22 26.85 2.03 39.80 31.75 3.05 14.10 33.20 1.93 0.76 0.70 4.70 3.89 34.93 22.23 1.057 0.080 1.692 1.375 0.147 0.590 1.432 0.076 0.030 0.028 0.185 0.153 1.500 0.875 24 26.85 2.03 42.98 34.93 3.74 14.99 36.37 1.93 0.76 0.70 4.70 3.89 38.1 22 23 62gb -12e (219) 12e (219) 4 -hole flange mounting with plain shell with film wire terminations
19 box mounting receptacles hermetic seal 12h 62gb -12h shell size a max b 0.005 ( 0.13) c max sq. d e 0.008 ( 0.203) (.051) .002 f 0.005 ( 0.13) r 0.005 (0.13) s y 0.828 0.062 0.812 0.594 0.120 0.443 0.568 1.250 0.473 08 21.03 1.57 20.61 15.08 3.05 11.25 14.42 31.73 12.01 0.828 0.062 0.937 0.719 0.120 0.443 0.695 1.359 14.99 10 21.03 1.57 23.79 18.29 3.05 11.25 17.53 34.52 14.99 0.828 0.062 1.031 0.812 0.120 0.443 0.864 1.531 0.750 12 21.03 1.57 26.17 20.57 3.05 11.25 21.84 38.89 19.05 0.828 0.062 1.125 0.906 0.120 0.443 0.989 1.656 0.875 14 21.03 1.57 28.57 23.11 3.05 11.25 25.15 42.06 22.23 0.828 0.062 1.218 0.969 0.120 0.443 1.113 1.781 1.000 16 21.03 1.57 30.93 24.64 3.05 11.25 28.19 45.24 25.40 0.828 0.062 1.312 1.062 0.120 0.443 1.238 1.891 1.125 18 21.03 1.57 33.32 26.92 3.05 11.25 31.49 48.03 28.58 0.890 0.093 1.437 1.156 0.120 0.561 1.363 2.031 1.250 20 22.60 2.36 36.49 29.46 3.05 14.24 34.54 51.59 30.75 0.890 0.093 1.562 1.250 1.120 0.561 1.488 2.156 1.375 22 22.60 2.36 39.67 31.75 3.05 14.24 37.85 54.76 34.93 0 890 0.093 1.687 1.375 0.147 0.593 1.615 2.277 1.500 24 22.60 2.36 42.84 35.05 3.81 15.06 41.15 57.84 38.10 4 -hole square mounting with exposed solder buckets or flattened and pierced pins.
20 single hole fixing receptacles table of styles 62gb -57a page no. 23 62gb -57a (219) 23 62gb -14e 24 62gb -14f 24 62gb -57t 25 62gb -17p 25 62gb -17h hermetic seal 26
21 single hole fixing receptacles table of styles 62gb -1 3h hermetic seal 62gb -5005 -10 62gb -5036 -10 62gb -5016 -10 62gb -5024 62gb -5052 62gb -5030 page no. 26 27 27 28 28 29 29
22 single hole fixing receptacles table of styles 62gb -5065 62gb -5067 page no. 30 30
23 single hole fixing receptacles 57a 62gb -57a bs9522 - f0017 - c2099 single hole mounting with plain shell for direct wiring to exposed solder buckets. has panel 'o' ring seal. shell size a max b 0.005 ( 0.13) c sq, f 0.005 (0.13) k min max l m -0.005 (-0.13) n r .0.005 0.005 (0.13) (0.13) s min y x thread 0.978 0.117 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 08 24.84 2.97 23.93 17.93 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 nef 0.978 0.117 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 24.84 2.97 27.10 17.93 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 nef 0.978 0.117 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0 885 1 531 0.750 12 24.84 2.97 31.88 17.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 unef 0.978 0.117 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 24.84 2.97 35.05 17.93 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 -20 unef 0.978 0.117 1.505 0.706 0.062 0.125 1 312 1.063 1.076 1.135 1.781 1.000 16 24.84 2.97 38.23 17.93 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 nef 0.978 0.117 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 18 24.84 2.97 41.40 17.93 1.58 3.18 36.50 30.18 30.50 32.00 48 03 28.58 1.1/4 - 18 nef 1.048 0.148 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 20 26.62 3.76 46.15 22.71 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 - 18nef 1.048 0.148 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 22 26.62 3.76 49.33 22.71 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1 /2 - 18 nef 1.048 0.148 2.067 0.927 0.062 0.250 1 .812 1 .563 1.576 1 635 2 277 1.500 24 26.62 3.76 52.50 23.55 1.575 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 nef 57a(219) 62gb -57a (219) bs9522 - f0017 - c2261 single hole mounting with plain shell and film wire terminations shell size a m b 0.005 ( 0.13) c sq. max. max d min f 0.005 (0.13) h max min k min max l m n r -0.005 0.005 0.005 (-0.13) (0.13) (0.13) s min y x thread 0.976 0.117 0.942 0.030 0.028 0.706 0.173 0.133 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 08 24.79 2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 -24 nef 0.976 0.117 1.067 0.030 0.028 0.706 0.173 0.133 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 24.79 2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 nef 0.976 0.117 1.255 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 12 24.79 2.97 31.88 0.76 0.71 17.93 4.40 3.38 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 unef 0.976 0.117 1.380 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 24.79 2.97 35.05 0.76 0.71 17.93 4.40 3.38 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.26 1 - 20 unef 0.976 0.117 1.505 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 16 24.79 2.97 38.23 0.76 0.71 17.93 4.40 3.38 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 nef 0.976 0.117 1.630 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 18 24.79 2.97 41.40 0.76 0.71 17.93 4.40 3.38 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1 /4 - 18 nef 1 .195 0.148 1 817 0.030 0.028 0.894 0.173 0.133 0.062 0.250 1 562 1 .313 1 .326 1 .385 2.031 1 .250 20 30.35 3.76 46.15 0.76 0.71 22.71 4.40 3.38 1.58 6.35 38.68 33.35 35.18 51 59 31.75 1 .3/8 - 18 nef 1.195 0.148 1.942 0.030 0.028 0.894 0.173 0.133 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 22 30.35 3.76 49.33 0.76 0.71 22.71 4.40 3.38 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18nef 1.228 0.148 2.067 0.030 0.028 0.927 0.173 0.133 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 24 30.35 3.76 52.50 0.76 0.71 23.55 4.40 3.38 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 nef
24 single hole fixing receptacles 14e 62gb -14e mil -c -26482 ms3114e bs9522 - f0017 - c2098 single hole mounting with grommet and grommet nut. has panel 'o' ring seal shell size a max b 0.005 (0.13) c max sq. f 0.005 (0.13) g dia max k min max l m n r -0.005 0.005 0.005 (-0.13) ( 0.13) (0.13) s y x thread 1.344 0.117 0.942 0.706 0 713 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 08 34.14 2.97 23.93 17.93 18.11 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16-24nef 1.344 0.117 1.067 0.706 0.838 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 34.14 2.97 27.10 17.93 21.29 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 nef 1.344 0.117 1.255 0.706 0.963 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 12 34.14 2.97 31 .88 17.93 24.46 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 unef 1 .344 0.117 1.380 0.706 1.088 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 34.14 2.97 35.05 17.93 27.63 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 unef 1.344 0.117 1.505 0.706 1.213 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 16 34.14 2.97 38.23 17.93 30.81 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 -18nef 1.344 0.117 1.630 0.706 1.338 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 18 34.14 2.97 41.40 17.93 33.98 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1/4 ?18 nef 1.576 0.148 1 817 0.894 1.463 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 20 40.03 3.76 46.15 22.71 37.16 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 - 18 nef 1.576 0.148 1.942 0.894 1 .588 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 22 40.03 3.76 49.33 22.71 40.33 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1 /2 - 18 nef 1.609 0.148 2.067 0.927 1.713 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 24 40.87 3.76 52.50 23.55 43.51 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 nef 14f 62gb -1 4f mil -c -26482 ms3114f single hole mounting with grommet and grommet nut fitted with integral strain relief clamp. has panel 'o' ring seal shell size a max b 0.005 (0.13) c max sq. f 0.005 (0.13) g dia. max. h 0.005 ( 0.13) k min max l m n r -0.005 0.005 0.005 (-0.13) (0.13) (0.13) s y x thread 1.762 0.117 0.942 0.706 0.828 0.156 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473 08 44.75 2.97 23.93 17.93 21.03 3.96 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 -24 nef 1.762 0.117 1.067 0.706 0.891 0.188 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 44.75 2.97 27.10 17.93 22.63 4.78 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 124 nef 1.762 0.117 1.255 0.706 1.016 0.312 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 12 44 75 2.97 31.88 17.93 25.81 7.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 - 20 unef 1 .736 0.117 1.380 0.706 7.147 0.375 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 44.10 2.97 35.05 17.93 28.97 9.53 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 nef 1.876 0.117 1.505 0.706 1.203 0.500 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 16 47.65 2.97 38.23 17.93 30.56 12.7 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 nef 1.876 0.117 1.630 0.706 1.426 0.625 0.062 0.125 1.437 1.188 1.201 1.260 1.891 7.125 18 47.65 2.97 41.40 17.93 36.22 15.88 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1/4 - 18 nef 2.118 0.148 1.817 0.894 1.426 0.625 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 20 53.8 3. 76 46.15 22.71 36.22 15.88 1.58 6.35 38 68 33.35 33.68 35.18 51 .59 31.75 1.3/8 - 18 nef 2.118 0.148 1.942 0.894 7.567 0.750 0.062 0.250 1.687 1.438 1.451 1.510 2.756 1.375 22 53.8 3.76 49.33 22.71 39.80 19.05 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18 nee 2.250 0.148 2.067 0.927 1.735 0.800 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 24 57.15 3.76 52.50 23.55 44.07 20.32 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 nef
25 single hole fixing receptacles 57t 62g b -57t bs9522 - f0017 - c2100 single hole mounting with threaded shell to accept accessories shell size a max b 0.005 ( 0.13) c max. sq. f 0.005 (0.13) g dia, max. k min max l m -0.005 (- 0.13) n y x thread 0.978 0.117 0.942 0.595 0.426 0.062 0.125 0.750 0.527 0.473 08 24.84 2.97 23.93 15.12 10.82 1.58 3.18 19.05 13.3 7/16 - unef 12.03 9/16 - 24 nef 0.978 0.117 1.067 0.595 0.552 0.062 0.125 0.875 0.652 0.590 10 24.84 2.97 27.10 15.12 14.02 1.58 3.18 22.23 16.56 9/16 ? unef 14.99 11/16 ? 24 nef 0.978 0.117 1.255 0.595 0.677 0.062 0.125 1.062 0.815 0.750 12 24.84 2.97 31 .88 15.12 17.20 1.58 3.18 26.98 20.70 11/16 ? unef 19.05 7/8 ? 20 unef 0.978 0.117 1.380 0.595 0.802 0.062 0.125 1.187 0.939 0.875 14 24.84 2.97 35.05 15.12 20.37 1.58 3.18 30.15 23.85 13/16 - unef 22.23 1 ? 20 unef 0.978 0.117 1.505 0.595 0.927 0.062 0.125 1.312 1.063 1.000 16 24.84 2.97 38.23 15.12 23.55 1.58 3.18 33.32 27.00 15/16 ? unef 25.40 1.1/18 ? 18 nef 0.978 0.117 1.630 0.595 1.052 0.062 0.125 1.437 1.188 1.125 18 24.84 2.98 41.40 15.12 26.72 1.58 3.18 36.50 30.18 1.1/16 ? unef 28.58 1.1/4 ? 18 nef 1.048 0.148 1.817 0.720 1.167 0.062 0.250 1.562 1.313 1.250 20 26.62 3.76 46.15 18.29 29.65 1 58 6.35 38.68 33.35 1.3/16 ? unef 31.75 1.3/8 - 18 nef 1.048 0.148 1.942 0.720 1.292 0.062 0.250 1.687 1.438 1.375 22 26,62 3.76 49.33 18.29 32.82 1.58 6.35 42.85 36.53 1.5/16 ? unef 34.93 1.1/2 ? 18 nef 1.048 0.148 2.067 0.753 1.416 0.062 0.250 1.812 1.563 1.50 24 26.62 3.76 52.50 19.13 35.97 1.58 6.35 46.05 39.70 1.7/16 - unef 38.10 1.5/8 - 18 nef 17p 62gb -17p mil -c -26482 ms3114p single hole mounting for potting. supplied complete with potting mould locating ring and panel 'o' ring seal shell size a max. b 0.005 (0.13) c max. sq. f 0.005 (0.13) g k min max. l m -0.005 (-0.13) n 0.005 (0.13) r 0.005 (0.13) y z x thread 1.391 0.117 0.942 0.706 0.572 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 0.260 08 35.33 2.97 23.93 17.93 14.53 1.58 3.175 19.05 13.3 13.72 14.53 31.75 12.03 6.60 9/16 -24 nef 1.391 0.117 1.067 0.706 0.666 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 0.463 10 35.33 2.97 27.10 17.93 16.92 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11.76 11/16 -24 nef 1.391 0.117 1.255 0.706 0.822 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 0.557 12 35.33 2.97 31.88 17.93 20.88 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 14.15 7/8 - 20 unef 1.391 0.117 1.380 0.706 0.907 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 0.590 14 35.33 2.97 35.05 17.93 23.06 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 14.99 1 - 20 unef 1.391 0.117 1.505 0.706 1.040 0.062 0.125 1.312 1 063 1 .076 1.135 1.781 1.000 0.713 16 35.33 2.97 38.23 17.93 26.42 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 18.11 1.1/18 ? 18 nef 1.391 0.117 1.630 0.706 1.165 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 0.835 18 35.33 2.97 41.40 17.93 29.59 1.58 3.175 36.50 30.18 30.50 32.00 48.03 28.58 21.21 1.1/4 - 18 nef 1.641 0.148 1.817 0.894 1.285 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.015 20 41.68 3.76 46.15 22.71 32.64 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 25.78 1.3/8 ?18 nef 1.641 0.148 1.942 0.894 1.400 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.015 22 41.68 3.76 49.33 22.71 35.56 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 25.78 1.1/2 ?18 nef 1.674 0.148 2.067 0.927 1 .540 0.062 0.250 1.812 1 .563 1.576 1.635 2.277 1.500 1.265 24 42.52 3.76 52.50 23.55 39.12 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 32.13 1.5/8 - 18 nef
26 single hole fixing receptacles hermetic seal 17h 62gb -17h mil -c -26482 ms3114h single hole mounting with pin contacts in one piece glass -to -metal seal. exposed solder buckets or flattened and pierced pins. has panel 'o' ring seal shell size a max. b 0.005 (0.13) c max. sq f 0.005 (0.13) min k max l m -0.005 (-0.13) n r 0.005 0.005 (0.13) (0.13) s y x thread 0.828 0.094 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 08 21.03 2.39 23.93 17.93 1.57 3.18 19.05 13.39 13.72 14.53 31.75 12.01 9/16 - 24 nef 0.828 0.094 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 21.03 2.39 27.10 17.93 1.57 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 ? 24 nef 0.828 0.094 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 12 21.03 2.39 31.88 17.93 1.57 3.18 26.97 20.70 21.03 22.48 38.89 19.05 7/8 ? 20 unef 0.828 0.094 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 21.03 2.39 35.05 17.93 1.57 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 unef 0.828 0.094 1.505 0.706 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 16 21.03 2.39 38.23 17.93 1.57 3.18 33.32 27.00 27.33 28.53 45.24 25.40 1.1/8 ? 18 nef 0.828 0.094 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 18 21.03 2.39 41.40 17.93 1.57 3.18 36.50 30.18 30.51 32.00 48.03 28.58 1.1/4 ? 18 nef 0.828 0.125 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 20 21.03 3.18 46.15 22.71 1.57 6.35 39.67 33.35 33.68 35.18 51.59 30.75 1.3/8 ? 18 nef 0.890 0.125 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 22 22.61 3.18 49.33 22.71 1.57 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 ? 18 nef 0.890 0.125 2.067 0.927 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 24 22.61 3.18 52.50 23.55 1.57 6.35 46.02 39.70 40.03 41.53 57.84 38.10 1.5/8 ? 18 nef 13h 62gb -1 3h mil -c -26482 ms3113h solder mounting with plain shell and exposed solder buckets or flattened and pierced pins shell size a max b 0.005 ( 0.13) c max f 0.005 ( 0.13) g max j max r 0.005 ( 0.13) s min y dia. max 0.828 0.036 0.630 0.426 0.562 0.592 0.578 1.250 0.473 08 21.03 0.91 16.00 10.82 14.27 15.04 14.68 31.75 12.01 0.828 0.036 0.755 0.426 0.672 0.592 0.687 1.359 0.590 10 21.03 0.91 19.18 10.82 17.07 15.04 17.45 34.52 14.99 0.828 0.036 0.849 0.426 0.781 0.592 0.797 1.531 0.750 12 21.03 0.91 21.56 10.82 19.84 15.04 20.24 38.89 19.05 0.828 0.036 0.974 0.426 0.906 0.592 0.922 1.656 0.875 14 21.03 0.91 24.74 10.82 23.01 15.04 23.42 42.06 22.23 0.828 0.036 1.099 0.426 1.031 0.592 1.047 1.781 1.000 16 21.03 0.91 27.91 10.82 26.19 15.04 26.59 45.24 25.40 0.828 0.036 1.223 0.426 1.156 0.592 1.172 1.891 1.125 18 21.03 0.91 31.06 10.82 29.36 15.04 29.77 48.03 28.58 0.890 0.036 1.317 0.488 1.250 0.658 1.266 2.031 1.250 20 22.61 0.91 33.45 12.40 31.75 16.70 32.16 51.59 30.75 0.890 0.036 1.443 0.488 1.375 0.686 1.390 2.156 1.375 22 22.61 0.91 36.65 12.40 34.93 17.42 35.31 54.76 34.93 0.890 0.036 1.567 0.521 1.500 0.719 1.516 2.277 1.500 24 22.61 0.91 39.80 13.23 38.10 18.26 38.51 57.84 38.10
27 single hole fixing receptacles 5005 62gb -5005 -10 (rsre sd/c 235025/x) single hole mounting plain shell with pc pin terminated contacts. reduced diameter flange with panel 'o' seal size 10 only a max b +0.001 -0.002 (+0.03) (-0.03) d dia. max f +0.002 -0.003 (+0.05) (-0.08) k min max m -0.005 (-0.13) n 0.003 (0.08) r +0.005 (+0.13) s y dia. max. x thread l dia 10 0.877 0.065 0.880 0.681 0.062 0.125 0.655 0.659 0.690 1.017 0.590 11/16 ? 24 nef 0.820 22.28 1.65 22.35 17.29 1.58 3.18 16.63 16.47 17.52 25.83 14.99 20.83 5036 62gb -5036 -10 (rsre sd/c235025/x) single hole mounting with circular flange and p.c. terminations size 10 only shell size a max b +0.001 -0.002 (+0.03) (-0.05) d dia. max f +0.002 -0.003 (+0.05) (-0.08) y dia. max. k min max m -0.005 (-0.13) n 0.003 (0.08) r +0.005 (+0.13) s x thread l dia 10 0.829 0.066 0.880 0.679 0.590 0.062 0.125 0.655 0.659 0.690 1.017 11/16 ? 24 nef 0.820 21.06 1.67 22.35 17.25 14.99 1.57 3.18 16.63 16.47 17.52 25.83 20.83
28 single hole fixing receptacles 5016 62gb -5016 -10 (rsre sd/c 235025/x) single hole mounting plain shell for direct wiring to exposed solder buckets. reduced diameter flange with panel 'o' ring seal solder bucket: size 10 only shell size a max b +0.002 -0.001 (+0.05) (-0.03) d dia. max f + 0.003 - 0.002 (+ 0.08) (- 0.05) k min max m - 0.010 (- 0.25) n 0.005 ( 0.13) r + 0.005 (+ 0.13) s y dia. max. x thread 10 0.902 0.064 0.880 0.678 0.062 0.125 0.655 0.665 0.697 1.359 0.590 11/16 ? 24 nef 22.91 1.62 22.35 17.21 1.58 3.18 16.63 16.89 17.70 34.52 14.99 5024 62gb -5024 (rsre sd/c 35077/x) single hole mounting plain shell for direct wiring to exposed solder buckets. reduced diameter flange with panel 'o' ring seal solder buckets: size 8, 12 and 14 only shell size a max b 0.005 ( 0.13) d dia. max f 0.005 ( 0.13) k min max m - 0.005 (- 0.13) n r 0.005 0.005 ( 0.13) ( 0.13) s min y dia. max x thread 0.978 0.117 0.830 0.706 0.062 0.125 0.527 0.540 0.572 1.250 0.473 08 24.84 2.97 21.08 17.93 1.58 3.18 13.3 13.72 14.53 31.75 12.03 9/16 - 24 nef 0.978 0.117 1.130 0.706 0.062 0.125 0.815 0.828 0.885 1.531 0.750 12 24.84 2.97 28.70 17.93 1.58 3.18 20.70 21.03 22.48 38.89 19.05 7/8 - 20 unef 0.978 0.117 1.260 0.706 0.062 0.125 0.939 0.952 1.010 1.656 0.875 14 24.84 2.97 32.00 17.93 1.58 3.18 23.85 24.18 25.65 42.06 22.23 1 -20 unef
29 single hole fixing receptacles 5052 62gb -5052 -10 single hole fixing with circular flange and back end thread - solder termination size 10 only shell size a max b ( 0.05) ( 0.03) c max. sq. f + 0.003 - 0.002 (+ 0.08) (- 0.05) k min max l m - 0.005 (- 0.13) n 0.005 ( 0.13) r 0.005 ( 0.13) s 0.005 ( 0.13) x thread 10 0.947 0.062 0.880 0.677 0.062 0.125 0.820 0.650 5/8 ? 24 unef 0.697 1.359 11/16 ? 24 nef 24.06 1.58 22.35 17.19 1.58 3.18 20.83 16.51 17.70 34.52 5030 62g b -5030 bulkhead mounting receptacle with solder terminations shell size a max b 0.005 ( 0.13) c 0.010 ( 0.25) f 0.005 ( 0.13) l n thread 0.978 0.094 0.812 0.415 0.563 08 24.85 2.39 20.63 10.54 14.30 7/16 - 28 unef 0.978 0.094 0.937 0.415 0.680 10 24.85 2.39 23.80 10.54 17.28 9/16 - 24 nef 0.978 0.094 1.031 0.415 0.859 12 24.85 2.39 26.19 10.54 21.82 11 /16 - 24 nef 0.978 0.094 1.125 0.415 0.984 14 24.85 2.39 28.58 10.54 25.00 13/16 - 20 unef 0.978 0.094 1.218 0.415 1.108 16 24.85 2.39 30.94 10.54 28.15 15/16 - 20 unef 0.978 0.094 1.3121 0.415 1.233 18 24.85 2.39 33.33 10.54 31.32 1.1/16 - 18nef 1.048 0.102 1.437 0.535 1.358 20 26.62 2.59 36.50 13.59 34.50 1.3/16 -18nef 1.048 0.102 1.562 0.535 1.483 22 26.62 2.59 39.68 13.59 37.67 1.5/16 - 18 nef 1.048 0.102 1.687 0.572 1.610 24 26.62 2.59 42.85 14.53 40.90 1.7/16 - 18 nef
30 single mole fixing receptacles 5065 62g b -5065 bs9522 -f0017 c2261 single hole mounting with plain shell and film wire terminations shell size a max b 0.005 ( 0.13) c sq. d max min f 0.005 ( 0.13) h max min j 0.020 ( 0.51) k min max l m n r -0.005 0.005 0.005 (-0.13) (0.13) (0.13) s y x thread 1.021 0.117 0.942 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473 08 25.94 2.97 23.93 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 nef 1.021 0.117 1.067 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 25.94 2.97 27.10 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 24 nef 1.021 0.117 1.255 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 12 25.94 2.97 31.88 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 - 20 unef 1.021 0.117 1.380 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 25.94 2.97 35.05 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 unef 1.021 0.117 1.505 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 16 25.94 2.97 38.23 0.76 0.71 17.93 5.54 4.52 1 .52 1.58 3.18 33.32 27.00 27.33 28.83 45 24 25.40 1.1/8 - 18 nef 1.021 0.117 1.630 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 18 25.94 2.97 41.40 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1 /4 - 18 nef 1.240 0.148 1.817 0.030 0.028 0.894 0.218 0.178 0.060 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1 .250 20 31.50 3.76 46.15 0.76 0.71 22.71 5.54 4.52 1.52 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 - 18 nef 1.240 0.148 1942 0.030 0.028 0.894 0.218 0.178 0.060 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 22 31 .50 3.76 49.33 0.76 0.71 22.71 5.54 4.52 1 .52 1.58 6.35 42.85 36.53 36.855 38.35 54.76 34.93 1.1/2 - 18 nef 1.273 0.148 2.067 0.030 0.028 0.927 0.218 0.178 0.060 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1 .500 24 32.34 3.76 52.50 0.76 0.71 23.55 5.54 4.52 1.52 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 nef 5067 62gb -5067 bs9522 - f0017 - c2261 single hole mounting with plain shell and film wire terminations shell size a max b 0.005 ( 0.13) c max sq d max min f 0.005 ( 0.13) h max min j 0.012 ( 0.30) k min max l m n r -0.005 0.005 0.005 (-0.13) (0.13) (0.13) s y x thread 1.095 0.117 0.942 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 08 27.81 2.97 23.93 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 nef 1.095 0.117 1.067 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 10 27.81 2.97 27.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 24 nef 1.095 0.117 1.255 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 12 27.81 2.97 31.88 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 26.98 20.70 21.03 22.50 38.89 19.05 7/8 - 20 unef 1.095 0.117 1.380 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875 14 27.81 2.97 35.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 unef 1.095 0.117 1.505 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000 16 27.81 2.97 38.23 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 33.23 27.00 27.33 28.83 45.24 25.40 1.1/8 -18 nef 1.095 0.117 1.630 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 18 27.81 2.97 41.40 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 36.50 30.18 30.51 32.00 48.03 28.58 1.1 /4 - 18 nef 1.309 0.148 1.817 0.030 0.028 0.894 0.262 0.230 0.049 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1 .250 20 33.24 3.76 46.15 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 -18 nef 1.309 0.148 1.942 0.030 0.028 0.894 0.262 0.230 0.049 0.062 0250 1.687 1.438 1.451 1.510 2.156 1.375 22 33.24 3.76 49.33 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18 nef 1.342 0.148 2.067 0.030 0.028 0.927 0.262 0.230 0.049 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 24 34.08 3.76 52.50 0.76 0.71 23.55 6.66 5.85 1.24 1.58 6.35 46.03 39.07 40.03 41.59 57.84 38.10 1.5/8 -18 nef
31 cable mounting receptacles table of styles 62gb -51t 62gb -11a 62gb -11e 62gb -1 1f 62gb -11j 62gb -11p page no. 32 32 33 33 34 34
32 cable mounting receptacles 51t 62gb -51t bs9522 -f0017 -c2101 basic cable mounting receptacle with threaded shell to accept standard cable accessories. shell size a max b 0.005 ( 0.13) c max sq f 0.005 ( 0.13) y dia max x thread 0.978 0.094 0.817 0.415 0.473 08 24.84 2.39 20.75 10.54 12.03 7/16 - 28 unef 0.978 0.094 0.942 0.415 0.590 10 24.84 2.39 23.93 10.54 14.99 9/16 - 24 nef 0.978 0.094 1.036 0.415 0.750 12 24.84 2.39 26.32 10.54 19.05 11 /16 - 24 nef 0.978 0.094 1.130 0.415 0.875 14 24.84 2.39 28.70 10.54 22.23 13/16 - 20 unef 0.978 0 094 1.223 0.415 1.000 16 24.84 2.39 31.07 10.54 25.40 15/16 - 20 unef 0.978 0.094 1.317 0.415 1.125 18 24.84 2.39 33.45 10.54 28.58 1.1/16 -18 nef 1.048 0.102 1.442 0.535 1.250 20 26 62 2.59 36.63 13.59 31.75 1 .3/16 -18 nef 1.048 0.102 1.567 0.535 1.375 22 26.62 2.59 39.80 13.59 34.93 1.5/16 -18 nef 1.048 0.102 1.692 0.560 / 0.574 1.500 24 26.62 2.59 42.98 14.23 / 14.58 38.10 1.7/16 -18 nef 11a 62gb -11a cable mounting receptacle with general duty back shell. no grommet supplied. shell size a max b 0 005 ( 0.13) c max sq f 0.005 ( 0.13) g dia max y dia max m thread 1.624 0.094 0.817 0.415 0.561 0.473 08 41.25 2.39 20.75 10.54 14.25 12.03 1/2 - 28 unef 1 .624 0.094 0.942 0.415 0.686 0.590 10 41.25 2.39 23.93 10.54 17.43 14.99 5/8 - 24 nef 1.624 0.094 1.036 0.415 0.811 0.750 12 41.25 2.39 26.32 10.54 20.60 19.05 3/4 - 20 unef 1.624 0.094 1.130 0.415 0.936 0.875 14 41.25 2.39 28.70 10.54 23.78 22.23 7/8 - 20 unef 1.624 0.094 1.223 0.415 1.061 1.000 16 41.25 2.39 31.07 10 54 26.95 25.40 1 ? 20 unef 1.624 0.094 1.317 0.415 1.186 1.125 18 41.25 2.39 33.45 10.54 30.13 28.58 1.3/16 ? 18 nef 1.687 0 104 / 0.100 1.442 0.535 1.311 1.250 20 42.85 2.64 / 2.55 36.63 13.59 33.30 31.75 1 3/16 -18 nef 1.687 0.104 / 0.100 1.567 0.535 1.436 1.375 22 42.85 2.64 / 2.55 39.80 13.59 36.75 34.93 1.7/16 -18 nef 1.730 0.104 / 0.100 1.692 0.569 / 0.574 1.561 1.500 24 43.94 2.64 / 2.55 42.98 14.45 / 14.58 39.65 38.10 1.7/16 -18 nef
33 cable mounting receptacles 11e 62gb -11e mil -c -26482 ms3111e cable mounting receptacle with grommet and grommet nut shell size a max b 0.005 ( 0.13) c max sq f 0.005 ( 0.13) g dia max y dia max 1.281 0.094 0.817 0.415 0.561 0.473 08 32.54 2.39 20.75 10.54 14.25 12.03 1.281 0.094 0.942 0.415 0.686 0.590 10 32.54 2.39 23.93 10.54 17.43 14.99 1.281 0.094 1.036 0.415 0.811 0.750 12 32.54 2.39 26.32 10.54 20.60 19.05 1.281 0.094 1.130 0.415 0.936 0.875 14 32.54 2.39 28.70 10.54 23.78 22.23 1.281 0.094 1.223 0.415 1.061 1.000 16 32.54 2.39 31.07 10.54 26.95 25.40 1.281 0.094 1.317 0.415 1.186 1.125 18 32.54 2.39 33.45 10.54 3013 28.58 1.383 0.102 1.442 0.535 1.311 1.250 20 35.13 2.59 36.63 13.59 33.30 31.75 1.383 0.102 1.567 0.535 1.436 1.375 22 35.13 2.59 39.80 13.59 36.75 34.93 1.383 0.102 1.692 0.569 / 0.574 1.561 1.500 24 35.13 2.59 42.98 14.45 / 14.58 39.65 38.10 62gb -11f mil -c -26482 ms3111f cable mounting receptacle with grommet and grommet nut fitted with integral strain relief clamp shell size a max b 0.005 ( 0.13) c max sq f 0.005 ( 013) g dia max h 0.005 ( 0.13) y dia max 08 1.762 0.094 0.817 0.415 0.828 0.156 0.473 44.75 2.39 20.75 10.54 21.03 3.96 12.03 10 1.762 0.094 0.942 0 415 0.891 0.188 0.590 44.75 2.39 23.93 10.54 22.63 4.78 14.99 12 1.762 0.094 1.036 0.415 1.016 0.312 0.750 44.75 2.39 26.32 10.54 25.81 7.93 19.05 14 1.736 0.094 1.130 0.415 1.141 0.375 0.875 44.10 2.39 28.70 10.54 28.97 9.53 22.23 16 1.876 0.094 1.223 0.415 1.203 0.500 1.000 47.65 2.39 31.07 10.54 30.56 12.7 25.40 18 1.876 0.094 1.317 0.415 1.426 0.625 1.125 47.65 2.39 33.45 10.54 36.22 15.88 28.58 20 2.118 0.104 / 0.100 1.442 0.535 1 .426 0.625 1.250 53.80 2.64 / 2.55 36.63 13.59 36.22 15.88 31.75 22 2.118 0.104 / 0.100 1.567 0.535 1.567 0.750 1.375 53.80 2.64 / 2.55 39.80 13.59 39.80 19.05 34.93 24 2.250 0.104 / 0.100 1.692 0.569 / 0.574 1.735 0.800 1.500 57.15 2.64 / 2.55 42.98 14.45 / 14.58 44.07 20.32 38.10 11f
34 cable mounting receptacles 11j 62gb -11j with cable clamp for unscreened jacketed cable. no grommet supplied shell size a max b 0.005 ( 0.13) c max sq f 0.005 ( 0.13) g dia max y dia max min closed z max free 1.846 0.094 0.817 0.415 0.561 0.473 0.168 0.230 08 46.89 2.39 20.75 10.54 14.25 12.03 4.28 5.84 1.846 0.094 0.942 0.415 0.686 0.590 0.205 0.312 10 46.89 2.39 23.93 10.54 17.43 14.99 5.21 7.93 1.947 0.094 1.036 0.415 0.811 0.750 0.338 0.442 12 49.45 2.39 26.32 10.54 20.60 19.05 8.59 11.23 2.147 0.094 1.130 0.415 0.936 0.875 0.416 0.539 14 54.54 2.39 28.70 10.54 23.78 22.23 10.57 13.69 2.347 0.094 1.223 0.415 1.061 1.000 0.550 0.616 16 59.61 2.39 31.07 10.54 26.95 25.40 13.97 15.65 2.547 0.094 1.317 0.415 1.186 1.125 0.600 0.672 18 64.70 2.39 33.45 10.54 30.13 28.58 15.24 17.07 2.831 0.102 1.442 0.535 1.311 1.250 0.635 0.747 20 71.91 2.59 36.63 13.59 33.30 31.75 16.13 18.98 3.031 0.102 1.567 0.535 1.436 1.375 0.670 0.846 22 76.99 2.59 39.80 13.59 36.75 34.93 17.02 21.49 3.074 0.102 1.692 0.569 / 0.574 1.561 1.500 0.740 0.894 24 78.03 2.59 42.98 14.45 / 14.58 39.65 38.10 18.80 22.71 11p 62gb -11p mil -c -26482 ms3111p for potted seal supplied complete with detachable potting mould and location ring shell size a max 8 0.005 ( 0.13) c max sq f 0.005 ( 0.13) g dia max y dia max z min 1.316 0.094 0.817 0.415 0.572 0.473 0.260 08 33.43 2.39 20.75 10.54 14.53 12.03 6.60 1.425 0.094 0.942 0.415 0.666 0.590 0.463 10 36.20 2.39 23.93 10.54 16.92 14.99 11.76 1.394 0.094 1.036 0.415 0.822 0.750 0.557 12 35.41 2.39 26.32 10.54 20.88 19.05 14.15 1.394 0.094 1.130 0.415 0.907 0.875 0.590 14 35.41 2.39 28.70 10.54 23.04 22.23 14.99 1.394 0.094 1.223 0.415 1.040 1.000 0.713 16 35.41 2.39 31.07 10.54 26.42 25.40 18.11 1.394 0.094 1.317 0.415 1.165 1.125 0.835 18 35.41 2.39 33.45 10.54 29.59 28.58 22.21 1.612 0.102 1.442 0.535 1.285 1.250 1.015 20 40.95 2.59 36.63 13.59 32.64 31.75 25.78 1.612 0.102 1.567 0.535 1.400 1.375 1.015 22 40.95 2.59 39.80 13.59 35.56 34.93 25.78 1.674 0.102 1.692 0.569 / 0.574 1.540 1.500 1.265 24 42.52 2.59 42.98 14.45 / 14.58 39.12 38.10 32.13
35 insert orientations for m i l -c -26482 and for replacement purposes in bs9522 foo 17 normal position with pin contacts alternative position of insert with socket contacts ( ? counterclockwise) each diagram shows mating face of insert. alternate position of insert with pin contacts ( ? clockwise) orientation ? (degrees) insert arrangement normal w x y z 8-2 0 58 122 - - 8-3 0 60 210 - - 8-33 0 90 - - - 8-4 0 45 - - - 8-98 0 - - - - 10-2 0 - - - - 10-6 0 90 - - - 10-7 0 - - - - 12-3 0 - - 180 - 12-10 0 60 155 270 295 14-5 0 40 92 184 273 14-12 0 43 90 - - 14-15 0 17 110 155 234 14-19 0 30 165 315 - 16-18 0 54 152 180 331 16-23 0 158 270 - - 16-26 0 60 - 275 338 18-11 0 62 119 241 340 18-32 0 85 138 222 265 20-16 0 238 318 333 347 20-41 0 45 126 225 - 22-21 0 16 135 175 349 22-55 0 30 142 226 314 24-61 0 90 180 270 324
36 key/ keyway orientations for bs9522 f0017 datum is always taken from major key or keyway. in receptacles the major keyway always remains fixed in relation to the mounting flange. for the a',b,c,d',e and f orientations, the three bayonet locations and associated minor keyways are rotated complete, in accordance with the table below. n.b. - the accompanying diagram shows a receptacle shell, with keyways. corresponding key orientations for a mating plug shell are therefore always clockwise. shell size values for (degrees) values for q (degrees) values for b (degrees) n a* b c d* e f n a* b c d* e f n a* b c d* e f 8 105 92 - - 118 118 82 35 35 - - 35 30 50 75 75' - - 75 100 75 10 105 95 85 125 115 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75 12 105 97 89 121 113 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75 14 105 98 91 119 112 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 16 105 99 93 117 111 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 18 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 20 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 22 105 101 97 113 109 7s 120 35 35 35 35 35 30 50 75 75 75 100 75 75 75 24 105 101 97 113 109 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75 shell size values for j (degrees) orientation values for w (degrees) orientation n a* b c d* e f n a* b c d* e f 8 50 50 50 50 50 30 45 60 47 - - 73 73 47 10 50 50 50 50 50 30 45 60 50 40 80 70 70 50 12 50 50 50 50 50 30 45 60 52 44 76 68 70 50 14 50 50 50 50 50 30 35 60 53 46 74 67 30 75 16 50 50 50 50 50 30 35 60 54 48 72 66 30 75 18 50 50 50 50 50 30 35 60 55 50 70 65 30 75 20 50 50 50 50 50 30 35 60 55 50 70 65 30 75 22 50 50 50 50 50 30 35 60 56 52 68 64 30 75 24 50 50 50 50 50 30 35 60 56 52 68 64 30 75 * now inactive for new designs but available for replacement purposes. superseded in bs9522 f0017 by orientations e and f.
37

▲Up To Search▲

Price & Availability of 62GB-56TG14-22SN044

	To Download 62GB-56TG14-22SN044 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .