new product m6035c thru m6060c vishay general semiconductor document number: 88965 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 dual common-cathode schottky rectifier features ? guarding for overvoltage protection ? low power losses, high efficiency ? low forward voltage drop ? high forward surge capability ? high frequency operation ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, oring diodes, dc-to-dc converters or polarity protection applications. mechanical data case: to-220ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 30 a x 2 v rrm 35 v to 60 v i fsm 320 a v f 0.51 v, 0.56 v t j max. 150 c case pin 2 pin 1 pin 3 to-220ab 1 2 3 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms maximum ratings (t a = 25 c unless otherwise noted) parameter symbol m6035c m6045c m6060c unit maximum repetitive peak reverse voltage v rrm 35 45 60 v maximum average forward rectified current (fig. 1) total device per diode i f(av) 60 30 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode i fsm 320 a peak repetitive reverse current at t p = 2.0 s, 1 khz per diode i rrm 1.0 a voltage rate of change (rated v r ) dv/dt 10 000 v/s operating junction and storage temperature range t j , t stg - 65 to + 150 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test condition symbol m6035c m6045c m6060c unit typ. max. typ. max. instantaneous forward voltage per diode (1) i f = 10 a i f = 20 a i f = 30 a t j = 25 c v f 0.42 0.49 0.55 - - 0.61 0.43 0.52 0.59 - - 0.65 v i f = 10 a i f = 20 a i f = 30 a t j = 125 c 0.31 0.42 0.51 - - 0.56 0.33 0.47 0.56 - - 0.61 reverse current per diode (2) v r t j = 25 c t j = 125 c i r 140 106 700 175 180 140 700 175 a ma typical junction capacitance 4.0 v, 1 mhz c j 1170 - 970 - pf
new product m6035c thru m6060c vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88965 revision: 19-may-08 2 ratings and characteristics curves (t a = 25 c unless otherwise noted) thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol m6035c m6045c m6060c unit typical thermal resistance per diode r jc 2.0 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode m6045c-e3/45 2.068 45 50/tube tube figure 1. maximum forward current derating curve figure 2. forward power loss characteristics per diode 0 10 20 30 40 50 60 70 8 0 0255075100125150175 case temperat u re (c) a v erage for w ard c u rrent resisti v e or ind u cti v e load m6035c ~ m6045c m6060c 0 5 10 15 20 25 0 5 10 15 20 25 30 35 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 figure 3. maximum non-repetitive peak forward surge current per diode figure 4. typical instantaneous forward characteristics per diode 0 50 100 150 200 250 300 350 400 1 10 100 nu m b er of cycles at 60 hz a v erage for w ard c u rrent (a) t j = t j max. 8 .3 ms single half sine- w a v e 0.01 0.1 1 10 100 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 125 c t j = 150 c t j = 25 c m6035c ~ m6045c m6060c
new product m6035c thru m6060c vishay general semiconductor document number: 88965 revision: 19-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 5. typical reverse characteristics per diode figure 6. typical junction capacitance per diode 1 10 100 1000 10 000 100 000 1 000 000 10 20 30 40 50 60 70 8 090100 percent of rated peak re v erse v oltage( % ) instantaneo u s re v erse c u rrent ( a) t j = 150 c t j = 125 c t j = 25 c m6035c ~ m6045c m6060c 100 1000 10 000 0.1 1 10 100 re v erse v oltage( v ) j u nction capacitance (pf) m6035c ~ m6045c m6060c t j = 25 c f = 1.0 mhz v sig = 50 m v p-p figure 7. typical transient thermal impedance per diode 0.1 1 0.1 1 10 100 10 t - p u lse d u ration (s) transient thermal impedance (c/ w ) to-220ab 0.39 8 (10.10) 0.3 8 2 (9.70) 0.055 (1.40) 0.047 (1.20) 0.343 ( 8 .70) typ. 0.067 (1.70) typ. 0.331 ( 8 .40) typ. 0.150 (3. 8 0) 0.139 (3.54) dia. 0.114 (2.90) 0.106 (2.70) 0.634 (16.10) 0.61 8 (15.70) pin 2 3 1 0.11 8 (3.00) typ. 0.035 (0.90) 0.02 8 (0.70) 0.064 (1.62) 0.056 (1.42) 0.200 (5.0 8 ) typ. 0.100 (2.54) typ. 0.63 8 (16.20) 0.59 8 (15.20) 0.055 (1.40) 0.049 (1.25) 0.1 8 5 (4.70) 0.169 (4.30) 0.154 (3.90) 0.13 8 (3.50) 0.370 (9.40) 0.354 (9.00) 0.523 (13.2 8 ) 0.507 (12. 88 ) 0.102 (2.60) 0.0 8 7 (2.20) 1.161 (29.4 8 ) 1.106 (2 8 .0 8 ) 0.024 (0.60) 0.01 8 (0.45)
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
