micro-measurements@vishay.com m-bond 610 for transducers vishay micro-measurements www.vishaymg.com 44 document number: 11568 revision 21-aug-03 strain gage adhesives for transducer applications operating temperature range: ?452 to + 450 f (?269 to + 230 c) shelf life: 9 months at + 75 f (+ 24 c); 15 months at + 40 f (+ 5 c) pot life: 6 weeks at + 75 f (+ 24 c); 12 weeks at + 40 f (+ 5 c) clamping pressure: 45 to 60 psi (3 to 4 bar) 50 psi (3.4 bar) optimum cure requirements: recommended cure: *1 hours at + 350 f (+ 175 c) recommended postcure: *2 hours at + 400 to + 450 f (+ 205 to + 230 c) *altered for aluminum-alloy transducers. see strain gage installation procedures for transducers. characteristics kit: 4 bottles (11 g ea) curing agent 4 bottles (14 g ea) resin 4 brush caps for applying adhesive 4 disposable mixing funnels packaging two-component, solvent-thinned, epoxy-phenolic adhesive for high-precision transducers; solids content 22%. low viscosity, capable of gluelines <0.0002 in (0.005mm). extremely thin, hard, void-free gluelines minimize creep, hysteresis, and linearity problems. life limited by oxidation and sublimation effects at elevated temperatures. description other accessories used in an m-bond 610 installation: csm degreaser or gc-6 isopropyl alcohol silicon-carbide paper m-prep conditioner a m-prep neutralizer 5a gsp-1 gauze sponges csp-1 cotton applicators mjg-2 mylar tape tfe-1 teflon film hsc spring clamp gt-14 pressure pads and backup plates m-bond 610
|
