View 6MBI450U-170_2447186.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

h04-004-07 fuji electric co.,ltd. matsumoto factory specification device name : type name : spec. no. : igbt module 6MBI450U-170 ms5f 5393 1 14 ms5f 5393 feb. 19 ?03 s.yoshiwatari s.miyashita k.yamada t.fujihira feb. 19 ?03 feb.-19 -?03
h04-004-06 r e v i s e d r e c o r d s date classi- fication ind. content applied date drawn checked approved enactment issued date ms5f 5393 2 14 s.miyashita k.yamada t.fujihira feb.-19-?03
h04-004-03 14 ms5f 5393 3 6MBI450U-170 2. equivalent circuit 1. outline drawing ( unit : mm ) [inverter] [thermister] ? ? ? ? ?? ?? [thermistor] note)
h04-004-03 14 ms5f 5393 4 3.absolute maximum ratings ( at tc= 25 unless otherwise specified tc=25 tc=80 tc=25 tc=80 (*1) all terminals should be connected together when isolation test will be done. (*2) two thermistor terminals should be connected together, each other terminals should be connected together and shorted to base plate when isolation test will be done. (*3) recommendable value : 2.5~3.5 nm (m5) (*4) recommendable value : 3.5~4.5 nm (m6) 4. electrical characteristics ( at tj= 25 unless otherwise specified) (*) biggest internal terminal resistance among arm. forward on voltage vf (terminal) tj= 25 - tj=125 vf (chip) tj= 25 - - vge=15v thermistor resistance r t = 25 b b value t = 25/50 -nf 45 0.58 495 520 k 3305 3375 3450 ? -0.10 -0.80 t =100 465 - 2.85 2.40 - - units - 2.05 2.55 maximum ratings - 2.50 3.00 - - v - 8.5 v vge(th) na 3.0 ma 600 6.5 -- - symbols vge=20v vce = 0v conditions vge = 0v vce = 1700v screw torque - mounting *3 terminals *4 viso between terminal and copper base *1 between thermistor and others *2 -ic pluse pc tstg storage temperature isolation voltage max. typ. 3400 vac 4.5 3.5 n ? m units -ic tj min. characteristics -40 +125 900 2100 a w gate-emitter voltage collector current junction temperature collector power dissipation 450 ac : 1min. 1 device 150 v 20 v vges 1700 ic icp 600 450 1200 900 1ms continuous items symbols conditions vces collector-emitter voltage 0.32 vcc = 900v ic = 450a s 1.50 0.15 0.30 1.20 0.60 - 2.25 3.00 v 2.00 1.80 2.55 - 2.45 - - 5000 - 0.3 0.6 1.0 - s if = 450a - - if = 450a reverse recovery time vge=0v vce(sat) ( terminal) cies vce=10v,vge=0v,f=1mhz toff tf turn-off time input capacitance - rg = 1.1 ? - tj=125 - ic = 450ma tj= 25 tj=125 vge=15v ic = 450a tj= 25 tj=125 4.5 vce = 20v gate-emitter leakage current gate-emitter threshold voltage items tr tr (i) collector-emitter saturation voltage turn-on time vce(sat) (chip) m inverter lead resistance, terminal-chip* r lead - iges zero gate voltage collector current ices ton
h04-004-03 14 ms5f 5393 5 5. thermal resistance characteristics this is the value which is defined mounting on the additional cooling fin with thermal compo und. 6.recommend way of module mounting to heat sink clamping 1 initial : 1 /3 specified torque, sequence ( 1 ) (2) (3) (4) (5) (6) (7) (8) 2 final full specified torque (3.5 nm),sequence(4) (3) (2) (1) (8) (7) (6) (5) 7. indication on module 8.applicable category this specification is applied to igbt module named 6MBI450U-170 . 9.storage and transportation notes ? the module should be stored at a standard temperature of 5 to 35 and humidity of 45 to 75% . ? store modules in a place with few temperature changes in order to avoid condensation on the module surface. ? avoid exposure to corrosive gases and dust. ? avoid excessive external force on the module. ? store modules with unprocessed terminals. ? do not drop or otherwise shock the modules when transporting. lot.no. place of manufacturin g (code ) items symbols conditions characteristics units min. typ. max. - thermal resistance(1device) contact thermal resistance rth(j-c) rth(c-f) with thermal compound ( ) - - 0.0167 6MBI450U-170 450a 1700v /w -0.06 - - 0.10 igbt fwd (7)(3)(1)(5) (8) (4) (2) (6) m ounting ho les heat sink module
h04-004-03 14 ms5f 5393 6 10. definitions of switching time 11. packing and labeling display on the packing box - logo of production - type name - lot no - products quantity in a packing box l vcc ic v ce r g v ge v ge v ce ic 0v 0a 0v 1 0% 90% 1 0% 1 0% 90% 90% 0v ic v ce on on on on t t t t r r r r t t t t r(i) r(i) r(i) r(i) t t t t off off off off t t t t f f f f t t t t rr rr rr rr i i i i rr rr rr rr t t t t
h04-004-03 14 ms5f 5393 11. reliability test results 7 reliabilit y test items test cate- gories test items test methods and conditions reference norms eiaj ed-4701 number of sample accept- ance number 1 terminal strength pull force : 20n (control terminal) a - 111 5 ( 1 : 0 ) (pull test) 40n (main terminal) method 1 test time : 101 sec. 2 mounting strengt h screw torque : 2.5 ~ 3.5 n ? m (m5) a - 112 5 ( 1 : 0 ) 3.5 ~ 4.5 n ? m (m6) method 2 test time : 101 sec. 3 vibration range of frequency : 10 ~ 500hz a - 121 5 ( 1 : 0 ) sweeping time : 15 min. acceleration : 10g sweeping direction : each x,y,z axis test time : 6 hr. (2hr./direction) 4 shock maximum accelerati o : 1000g a - 122 5 ( 1 : 0 ) pulse width : 0.5msec. direction : each x,y,z axis test time : 3 times/direction 5 solderabitlity solder temp. : 2355 a - 131 5 ( 1 : 0 ) immersion time : 51sec. test time : 1 time each terminal should be immersed in solder within 1~1.5mm from the body. 6 resistance to solder temp. : 2605 a - 132 5 ( 1 : 0 ) soldering heat immersion time : 101sec. test time : 1 time each terminal should be immersed in solder within 1~1.5mm from the body. 1 high temperature storage temp. : 1255 b - 111 5 ( 1 : 0 ) storage test duration : 1000hr. 2 low temperature storage temp. : -405 b - 112 5 ( 1 : 0 ) storage test duration : 1000hr. 3 temperature storage temp. : 853 b - 121 5 ( 1 : 0 ) humidity relative humidity : 855% storage test duration : 1000hr. 4 unsaturated test temp. : 121 b - 123 5 ( 1 : 0 ) pressure cooker atmos p heric p ressure : 2.0310 5 pa (reference value) test duration : 20hr. 5 temperature +3 b - 131 5 ( 1 : 0 ) cycle test temp. : low temp. -40 - 5 +5 high temp. 125 - 5 rt 5 ~ 35 dwell time : high ~ rt ~ low ~ rt 1hr. 0.5hr. 1hr. 0.5hr. number of cycles : 100 cycles 6 thermal shock +0 b - 141 5 ( 1 : 0 ) test temp. : high temp. 100 - 5 +5 low temp. 0 - 0 used liquid : water with ice and boiling water dipping time : 5 min. par each temp. transfer time : 10 sec. number of cycles : 10 cycles mechanical tests environment tests
h04-004-03 14 ms5f 5393 8 reliabilit y test items test cate- gories test items test methods and conditions reference norms eiaj ed-4701 number of sample accept- ance number 1 high temperature +0 d - 313 5 ( 1 : 0 ) reverse bias test temp. : ta = 125 - 5 ( t j Q 150 ) bias voltage : vc = 0.8vces bias method : applied dc voltage to c-e vge = 0v test duration : 1000hr. 2 high temperature +0 d - 323 5 ( 1 : 0 ) bias test temp. : ta = 125 - 5 ( t j Q 150 ) bias voltage : vc = vge = +20v or -20v bias method : applied dc voltage to g-e vce = 0v test duration : 1000hr. 3 temperature b - 121 5 ( 1 : 0 ) humidity bias test temp. : 85 +-3 o c relative humidity : 85 +-5% bias voltage : vc = 0.8vces bias method : applied dc voltage to c-e vge = 0v test duration : 1000hr. 4 intermitted on time : 2 sec. d - 322 5 ( 1 : 0 ) operating life off time : 18 sec. (power cycle) test temp. : ? t j =1005 de g ( for igbt ) t j Q 150 , ta=255 number of cycles : 15000 cycles endurance tests endurance tests failure criteria item characteristic symbol failure criteria unit note lower limit upper limit electrical leakage current ices - usl2 ma characteristic iges - usl2 a gate threshold voltage vge(th) lsl0.8 usl1.2 ma saturation voltage vce(sat) - usl1.2 v forward voltage vf - usl1.2 v thermal igbt ? vge - usl1.2 mv resistance or ? vce fwd ? vf - usl1.2 mv isolation voltage viso broken insulation - visual visual inspection inspection peeling - the visual sample - plating and the others lsl : lower specified limit. usl : upper specified limit. note : each parameter measurement read-outs shall be made after stab ilizing the com ponents at room ambient for 2 hours minimum, 24 hours maximum after removal from the tests. and in case of the wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry completely before the measurement. each parameter measurement read-outs shall be made after stab ilizing the com ponents at room ambient for 2 hours minimum, 24 hours maximum after removal from the tests. and in case of the wetting tests, for example, moisture resistance tests, each component shall be made wipe or dry completely before the measurement.
h04-004-03 14 ms5f 5393 9 reliability test results test cate- gories test items reference norms eiaj ed-4701 number of test sample number of failure sample 1 terminal strength a - 111 5 0 (pull test) method 1 2 mounting strength a - 112 5 0 method 2 3 vibration a - 121 5 0 4 shock a - 122 5 0 5 solderabitlity a - 131 5 0 6 resistance to soldering heat a - 132 5 0 1 high temperature storage b - 111 5 2 low temperature storage b - 112 5 3 temperature humidity b - 121 5 storage 4 unsaturated b - 123 5 pressure cooker 5 temperature cycle b - 131 5 0 6 thermal shock b - 141 5 0 1 high temperature reverse bias d - 313 5 2 high temperature bias d - 323 5 ( for gate ) 3 temperature humidity bias b - 121 5 4 intermitted operating life d - 322 5 0 (power cycling) ( for igbt ) ??? under evaluation mechanical tests environment tests endurance tests mechanical tests environment tests endurance tests
h04-004-03 14 ms5f 5393 10 collector-emitter voltage vs. gate-emitter voltage (typ.) collector current vs. collector-emitter voltage (typ.) tj= 125 / chip capacitance vs. collector-emitter voltage (typ.) dynamic gate charge (typ.) collector current vs. collector-emitter voltage (typ.) tj= 25 / chip collector current vs. collector-emitter voltage (typ.) vge=15v (typ.) / chip tj=25 ? c / chip vge=0v, f= 1mhz, tj= 25 vcc=900v ic=450a tj= 25 0 200 400 600 800 1000 1200 012345 collector current : ic [a] collector-emitter voltage : vce [v] vge=20 15v 12v 10v 9v 0 200 400 600 800 1000 1200 012345 collector current : ic [a] collector-emitter voltage : vce [v] vge=20 15v 12v 10v 9v 0 200 400 600 800 1000 1200 012345 collector current : ic [a] collector-emitter voltage : vce [v] tj=125 tj=25 0 2 4 6 8 10 5 10152025 collector - emitter voltage : vce [ v ] gate - emitter voltage : vge [ v ] ic=900a ic=450a ic=225a 0.1 1.0 10.0 100.0 1000.0 0102030 capacitance : cies, coes, cres [ nf ] collector-emitter voltage : vce [v] cies coes cres 0 500 1000 1500 2000 2500 collector-emitter voltage : vce [ 200v/div ] gate - emitter voltage : vge [ 5v/div ] gate charge : qg [ nc ] vge vce
h04-004-03 14 ms5f 5393 11 reverse bias safe operating area (max.) switching loss vs. gate resistance (typ.) switching time vs. collector current (typ.) vcc=900v, vge=15v, rg=1.1 ? , tj=125 switching time vs. gate resistance (typ.) switching time vs. collector current (typ.) vcc=900v, vge=15v, rg=1.1 ? , tj= 25 vcc=900v, ic=450a, vge=15v, tj= 25 stray inductance Q 100nh +vge=15v,-vge Q 15v, rg R 1.1 ? ,tj Q 125 switching loss vs. collector current (typ.) vcc=900v, vge=15v, rg=1.1 ? vcc=900v, ic=450a, vge=15v, tj= 125 10 100 1000 10000 0 200 400 600 800 switching time : ton, tr, toff, tf [ nsec ] collector current : ic [ a ] ton tr tf 10 100 1000 10000 0 200 400 600 800 switching time : ton, tr, toff, tf [ nsec ] collector current : ic [ a ] ton tr tf 10 100 1000 10000 0.1 1.0 10.0 switching time : ton, tr, toff, tf [ nsec ] gate resistance : rg [ ? ] tr tf toff ton 0 50 100 150 200 250 0 200 400 600 800 1000 switching loss : eon, eoff, err [ mj/pulse ] collector current : ic [ a ] eon ( 125 ) eon(25 ) eoff ( 125 ) err(125 ) err(25 ) eoff(25 ) 0 50 100 150 200 250 300 350 0.1 1.0 10.0 switching loss : eon, eoff, err [ mj/pulse ] gate resistance : rg [ ? ] eoff err eon 0 300 600 900 1200 0 300 600 900 1200 1500 1800 collector current : ic [ a ] collector - emitter voltage : vce [ v ] toff toff
h04-004-03 14 ms5f 5393 12 transient thermal resistance (max.) reverse recovery characteristics (typ.) vcc=900v, vge=15v, rg=1.1 ? forward current vs. forward on voltage (typ.) chip temperature characteristic (typ.) 0 200 400 600 800 1000 1200 01234 forward current : if [ a ] forward on voltage : vf [ v ] t j =125 tj=25 10 100 1000 0 200 400 600 800 1000 reverse recovery current : irr [ a ] reverse recovery time : trr [ nsec ] forward current : if [ a ] irr (125 ) irr (25 ) trr (125 ) trr (25 ) 0.001 0.010 0.100 1.000 0.001 0.010 0.100 1.000 thermal resistanse : rth(j-c) [ /w ] pulse width : pw [ sec ] fwd igbt 0. 1 1 1 0 1 00 -60 -40 -20 0 20 40 60 80 1 00 1 20 1 40 1 60 1 80 temperature [ ] resistance : r [ k ]
h04-004-03 14 ms5f 5393 13 warnings warnings warnings warnings - this product shall be used within its absolute maximum rating (voltage, current, and temperature). this product may be broken in case of using beyond the ratings. u?~???R????? ~??????????? - connect adequate fuse or protector of circuit between three-phase line and this product to prevent the equipment from causing secondary destruction. ?]1??????]??u?gm?` ???``???? - use this product after realizing enough working on environment and considering of product's reliab ility life. this product may be broken before target life of the system in case of using bey ond the product's reliab ility life. u??h????u?m????u?m? u?m????????????? - if the product had been used in the environment with acid, organic matter, and corrosive gas ( hydrogen sulfide, sulfurous acid gas), the product's performance and appearance can not be ensured easily. ?C?????????h????u?C?Q??^ ?? - use this product within the power cycle curve (technical rep.no. : mt5f 12959) u???``? ( gY no.: mt5f 1 2959) - never add mechanical stress to deform the main or control terminal. the deformed terminal may cause poor contact problem. ??????????????? ? - according to the outline drawing, select proper length of screw for main terminal. longer screws may break the case. u?????L???x ?L?`?p?? - use this product with keeping the cooling fin's flatness between screw holes within 100um at 100mm and the roughness within 10um. also keep the tightening torque within the limits of this specification. improper handling may cause isolation breakdown and this may lead to a critical accident. ??????g??? 100mm 100um ?? 10um ?`??Q ???~F????1??k??? - it shall be confirmed that igbt's operating locus of the turn-off voltage and current are within the rbsoa specification. this product may be broken if the locus is out of the rbsoa. `???R???E rbsoa ?????_J rbsoa ???????? - if excessive static electricity is applied to the control terminals, the devices may be broken. implement some countermeasures against static electricity. ?^??????????? ?Qr????g? - never add the excessive mechanical stress to the main or control terminals when the product is applied to equipments. the module structure may be broken. ????g?H???^??? ????? - in case of insufficient -vge, erroneous turn-on of igbt may occur. -vge shall be set enough value to prevent this malfunction. (recommended value : -vge = -15v) `?R -vge ??`????? `???? -vge ???O?X : -vge = - 1 5v)
h04-004-03 14 ms5f 5393 14 cautions cautions cautions cautions - fuji electric is constantly making every endeavor to improve the product quality and reliab ility. however, semiconductor products may rarely happen to fail or malfunction. to prevent accidents causing injury or death, damage to property like by fire, and other social damage resulted from a failure or malfunction of the fuji electric semiconductor products, take some measures to keep safety such as redundant design, spread-fire-preventive design, and malfunction-protective design. ??C?~u??|m??????u???k? `????Cu?u???`Y?1? ???b?p??p????LO????O??`?O? ???_?v - the application examples described in this specification only explain typical ones that used the fuji electric products. this specification never ensure to enforce the industrial property and other rights, nor license the enforcement rights. ??d????Cu?????h??? ???I??g??????g??SZ??? - the product described in this specification is not designed nor made for being applied to the equipment or systems used under life-threatening situations. when you consider applying the product of this specification to particular used, such as vehicle-mounted units, shipboard equipment, aerospace equipment, medical devices, atomic control systems and submarine relaying equipment or systems, please apply after confirmation of this product to be satisfied about system construction and required reliab ility. ??d?u?????r??C?????? ???O??u????????u??IC?C? @C??????????H?????| ?????_J? if there is any unclear matter in this specification, please contact fuji electric co.,ltd.

▲Up To Search▲

Price & Availability of 6MBI450U-170

	To Download 6MBI450U-170 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .