subminiature automotive pcb relay G8QN subminiature automotive pcb relay compact size. high performance pcb relay. fully sealed construction. next generation general purpose automotive pcb relay. fully automated assembly. available types type contact form recommended loads type contact form recommended loads G8QN1c4 12dc spdt motor, resistive contact data continuous carry current (max.) 5a inrush current (l/r=7ms; 15ms max.) 20a contact voltage drop (initial value at 23 c) (max.) 100m w ratings/specifications rated voltage 12 vdc operating voltage (max.) 16 vdc coil resistance 210 w 10% pull in voltage (ldtt) at +20 c (max.) 7.3v dc (cold start) at +80 c (max.) 9.0v dc dropout voltage at +20 c (min.) 0.9v dc continuous carry current flow time (16v at 80 c) (max.) 15min. operate time (max.) 10 ms release time (max.) 5 ms operating ambient temperature 40 c to +85 c mechanical life (min.) 10,000,000 cycles (at frequency of 18,000 operations/hour) electrical life (resistive load) (min.) 100,000 cycles (14v; continuous carry current) weight 5.5g
G8QN G8QN application examples ? power window ? electric sunroof ? intermittent windshield wiper ? power door lock ? power seat ? electric wing mirror ? power radio aerial ? washer pump dimensions type lot no. mark rated voltage 1.5 4 1.3 1.6 2.5 10.2 1.6 1.2 1.2 10.0 12.5 max. 16.0 max. mounting holes (bottom view) 14.4 max. 3.5 0.5 1 2 3 4 5 terminal arrangement / internal connections (bottom view) n (all dimensions in mm) omron pcb relays may be mounted in any convenient location that is dry and not exposed to excessive dust, s0 2 , h 2 s or organic gases. all omron pcb relays may be oriented in any desired direction. whenever possible, however, care should be taken that they are not subjected to vibration along the direction of contact movement. if several relays are to be mounted on a single printed circuit board, they should be given at least 3mm clearance on all sides as shown in the diagram below. 3mm min. 3mm min. note: proper spacing is necessary to dissipate heat buildup from individual relays. other than this, there are normally no restrictions depending on application. please contact omron for details. omron electronics ltd. 1, apsley way, staples corner, london nw2 7hf phone: (0181) 450 4646 fax: (0181) 450 8087 cat. no. cG8QN001 leaders in electronic components in the interest of product improvement, specifications are subject to change without notice.
|
