pc3sd11ntzb PC3SD11NTZC pc3sd11ntzb/PC3SD11NTZC absolute maximum ratings outline dimensions (unit : mm) *1 the derating factors of absolute maximum ratings due to ambient temperature are shown in fig.1, 2 *2 ac for 1 min, 40 to 60%rh, f = 60hz parameter symbol rating unit forward current i f 50 0.1 ma reverse voltage rms on-state current repetitive peak off-state voltage peak one cycle surge current input output v r 6v a v i surge 1.2 (50hz sine wave) 600 a v drm v iso (rms) i t (rms) kv isolation voltage operating temperature t opr ? 55 to + 125 ? 30 to + 100 c c storage temperature t stg *2 *1 *1 soldering temperature t sol 260 (for 10s) 5 c (ta = 25 c) 1. home appliances 2. oa equipment, fa equipment 3. ssrs features applications phototriac coupler for triggering 1. isolation voltage between input and output (v iso (rms) :5kv) 2. high critical rate of rise of off-state voltage (dv/dt:min. 1 000v/ s) 3. recognized by ul, file no. e64380 4. approved by vde0884, file no.127413 (available as an option) ? pc3sd11ntzb , PC3SD11NTZC are for 200v line notice in the absence of confirmation by device specification sheets, sharp takes no responsibility for any defects that may occ ur in equipment using any sharp devices shown in catalogs, data books, etc. contact sharp in order to obtain the latest device specification sheets before usin g any sharp device. internet internet address for electronic components group http://sharp-world.com/ecg/ internal connection diagram anode mark 3sd11 0.5 typ. = 0 to 13 ? 6.5 0.3 0.6 0.2 1.2 0.3 7.12 0.3 2.9 0.5 0.5 0.1 2.54 0.25 3.25 0.5 3.5 0.5 7.62 0.3 0.26 0.1 1 2 3 6 5 4 6 5 4 nc 1 2 3 anode cathode nc anode, cathode no external connection anode, cathode 1 2 3 4 5 6 ? pin is not allowed external connection 5
pc3sd11ntzb/PC3SD11NTZC parameter conditions input forward voltage i f = 20ma on-state voltage output v d = 6v critical rate of rise of off-state voltage v d = 1/ ? 2 ? v drm transfer charac- teristics minimum trigger current v d = 6v, r l = 100 ? v d = 6v, r l = 100 ? , i f = 20ma min. ? ? 0.1 1 000 5 10 10 typ. 1.2 ? ? 10 11 max. 1.4 2.5 3.5 2 000 ? ? holding current symbol v f v t i h dv/dt i ft isolation resistance r iso i t = 0.1a unit v reverse current v r =3v v d =v drm i r repetitive peak off-state current i drm ma ?? 10 ? 5 a ?? 10 ? 6 a v/ s ? ? 7 ? ? 5 ma ? v (ta = 25 ? c) turn-on time ?? 100 t on s pc3sd11ntzb PC3SD11NTZC dc = 500v, 40 to 60%rh electro-optical characteristics 1 2 5 10 0.9 1.1 1 1.2 1.3 1.4 1.5 20 50 100 forward current i f (ma) forward voltage v f (v) t a =75 ? c 50 ? c 25 ? c 0 ? c ? 25 ? c 0 2 4 6 8 10 ? 40 0 ? 20 20 40 60 80 100 minimum trigger current i ft (ma) ambient temperature t a ( ? c) v d = 4v fig.3 forward current vs. forward voltage fig.4 minimum trigger current vs. ambient temperature 0 25 50 75 100 125 150 175 ? 30 ? 20 ? 100 102030405060708090100 rms on-state current i r (rms) (ma) ambient temperature t a ( ? c) 0 10 20 30 40 50 60 70 ? 30 ? 20 ? 100 102030405060708090100 forward current i f (ma) ambient temperature t a ( ? c) fig.1 rms on-state current vs. ambient temperature fig.2 forward current vs. ambient temperature
pc3sd11ntzb/PC3SD11NTZC 0.0001 0.01 1 ? 40 0 ? 20 20 40 60 80 100 repetitive peak off-state current i drm ( a) ambient temperature t a ( ? c) 0.1 0.001 v d = 600v 10 100 1 000 1 10 100 turn-on time t on ( s) forward current i f (ma) v d = 6v r l = 100 ? t a = 25 ? c fig.7 repetitive peak off-state current vs. ambient temperature fig.8 relative repetitive peak off-state voltage vs. ambient temperature fig.9 turn-on time vs. forward current 0.7 0.8 0.9 1 1.1 1.2 1.3 ? 40 0 ? 20 20 40 60 80 100 relative repetitive peak off-state voltage v drm (t j = t a ) / v drm (t j = 25 ? c) ambient temperature t a ( ? c) 1 1.2 1.4 1.6 1.8 2 2.2 2.4 ? 40 0 ? 20 20 40 60 80 120 100 on-state voltage v t (v) ambient temperature t a ( ? c) i t = 100ma 0.1 1 10 ? 40 0 ? 20 20 40 60 80 100 holding current i h (ma) ambient temperature t a ( ? c) v d = 6v fig.5 on-state voltage vs. ambient temperature fig.6 holding current vs. ambient temperature
notice the circuit application examples in this publication are provided to explain representative applications of sharp devices and are not intended to guarantee any circuit design or license any intellectual property rights. sharp takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of sharp's devices. contact sharp in order to obtain the latest device specification sheets before using any sharp device. sharp reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. manufacturing locations are also subject to change without notice. observe the following points when using any devices in this publication. sharp takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) the devices in this publication are designed for use in general electronic equipment designs such as: - - - personal computers - - - office automation equipment - - - telecommunication equipment [terminal] - - - test and measurement equipment - - - industrial control - - - audio visual equipment - - - consumer electronics (ii) measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when sharp devices are used for or in connection with equipment that requires higher reliability such as: - - - transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - - - traffic signals - - - gas leakage sensor breakers - - - alarm equipment - - - various safety devices, etc. (iii)sharp devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - - - space applications - - - telecommunication equipment [trunk lines] - - - nuclear power control equipment - - - medical and other life support equipment (e.g., scuba). contact a sharp representative in advance when intending to use sharp devices for any "specific" applications other than those recommended by sharp or when it is unclear which category mentioned above controls the intended use. if the sharp devices listed in this publication fall within the scope of strategic products described in the foreign exchange and foreign trade control law of japan, it is necessary to obtain approval to export such sharp devices. this publication is the proprietary product of sharp and is copyrighted, with all rights reserved. under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. express written permission is also required before any use of this publication may be made by a third party. contact and consult with a sharp representative if there are any questions about the contents of this publication.
|
