original creation date: 04/22/96 last update date: 07/30/96 last major revision date: 04/22/96 mn54f283-x rev 1a0 military data sheet 4-bit full adder with fast carry general description the f283 high-speed 4-bit binary full adder with internal carry lookahead accepts two 4-bit binary words (a0-a3, b0-b3) and a carry input (c0). it generates the binary sum outputs (s0-s3), and the carry output (c4) from the most significant bit. the f283 will operate with either active high or active low operands (positive or negative logic). ns part numbers 54F283DMQB 54f283fmqb 54f283lmqb industry part number 54f283 prime die m283 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
military data sheet mn54f283-x rev 1a0 features - guaranteed 4000v minimum esd protection 2
military data sheet mn54f283-x rev 1a0 (absolute maximum ratings) (note 1) storage temperature -65c to +150c ambient temperture under bias -55c to +125c junction temperature unde bias -55c to +175c vcc pin potential to ground pin -0.5v to +7.0v input voltage -0.5v to +7.0v note 2 input current -30 ma to +5.0 ma note 2 voltage applied to output in high state (with vcc=0v) -0.5v to vcc standard output -0.5v to +5.5v tri-state output current applied to output in low state (max) twice the rated iol (ma) esd last passing voltage (min) 4000 v note 1: absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. functional operation under these conditions is not implied. note 2: either voltage limit or current limit is sufficient to protect inputs. recommended operating conditions free air ambient temperature 0 c to +70 c commercial -55 c to +125 c military supply voltage +4.5v to +5.5v military +4.5v to +5.5v commercial 3
mn54f283-x rev 1a0 military data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp range: -55c to 125c symbol parameter conditions notes pin- name min max unit sub- groups iih input high current vcc=5.5v, vm=2.7v, vinh=5.5v, vinl=0.0v 1, 3 inputs 20 ua 1, 2, 3 ibvi input high current vcc=5.5v, vm=7.0v, vinh=5.5v, vinl=0.0v 1, 3 inputs 100 ua 1, 2, 3 iil input low current vcc=5.5v, vm=0.5v, vinh=5.5v (co) 1, 3 inputs -0.6 ma 1, 2, 3 vcc= 5.5v, vm=0.5v, vinh=5.5v (an,bn) 1, 3 inputs -1.2 ma 1, 2, 3 vol output low voltage vcc=4.5v, vil=0.8v, iol=20ma, vinh=5.5v 1, 3 outputs 0.5 v 1, 2, 3 voh output high voltage vcc=4.5v, vih=2.0v, ioh=-1.0ma 1, 3 outputs 2.5 v 1, 2, 3 ios output short-circuit current vcc=5.5v, vinh=5.5v, vinl=0.0v, vm=0.0v 1, 3 outputs -60 -150 ma 1, 2, 3 vcd input clamp diode voltage vcc=4.5v, im=-18ma, vinh=5.5v 1, 3 inputs -1.2 v 1, 2, 3 icc power supply current vcc=5.5v, vinl=0.0v, vinh=5.5v 1, 3 vcc 55 ma 1, 2, 3 icex output high leakage current vcc=5.5v, vinl=0.0v, vinh=5.5v, vm=5.5v 1, 3 outputs 250 ua 1, 2, 3 4
mn54f283-x rev 1a0 military data sheet electrical characteristics ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, tr=2.5ns, tf=2.5ns see ac figs symbol parameter conditions notes pin- name min max unit sub- groups tplh(1) propagation delay vcc=5.5v @25c, vcc=4.5v & 5.5v @ -55/125c 2, 4 c0 to sn 3.5 9.5 ns 9 2, 4 c0 to sn 3.5 14.0 ns 10, 11 tphl(1) propagation delay vcc=5.0v @ 25c, vcc=4.5v & 5.5v @ -55/125c 2, 4 c0 to sn 3.0 9.5 ns 9 2, 4 c0 to sn 3.0 14.0 ns 10, 11 tplh(2) propagation delay vcc=5.0v @ 25c, vcc=4.5v & 5.5v @ -55/125c 2, 4 an/bn to sn 3.0 9.5 ns 9 2, 4 an/bn to sn 3.0 17.0 ns 10, 11 tphl(2) propagation delay vcc=5.0v, vcc=4.5v & 5.5v @-55/125c 2, 4 an/bn to sn 3.0 9.5 ns 9 2, 4 an/bn to sn 3.0 14.0 ns 10, 11 tplh(3) propagation delay vcc=5.0v @ 25c, vcc=4.5v & 5.5v @ -55/125c 2, 4 c0 to c4 3.0 7.5 ns 9 2, 4 c0 to c4 3.0 10.5 ns 10, 11 tphl(3) propagation delay vcc=5.0v, vcc=4.5v & 5.5v @-55/125c 2, 4 c0 to c4 3.0 7.0 ns 9 2, 4 c0 to c4 2.5 10.0 ns 10, 11 tplh(4) propagation delay vcc=5.0v @ 25c, vcc=4.5v & 5.5v @ -55/125c 2, 4 an/bn to c4 3.0 7.5 ns 9 2, 4 an/bn to c4 3.0 10.5 ns 10, 11 tphl(4) propagation delay vcc=5.0v, vcc=4.5v & 5.5v @ -55/125c 2, 4 an/bn to c4 2.5 7.0 ns 9 2, 4 an/bn to c4 2.5 10.0 ns 10, 11 note 1: screen tested 100% on each device at -55 c, +25 c & +125 c temperature, subgroups a1, 2, 3, 7 & 8. note 2: screen tested 100% on each device at +25 c temperature only, subgroup a9. note 3: sample tested (method 5005, table 1) on each mfg. lot at +25 c, +125 c & -55 c temp., subgroups a1, 2, 3, 7 & 8. note 4: sample tested (method 5005, table 1) on each mfg. lot at +25 c subgroup a9, & periodically at +125 c & -55 c temp., subgroups 10 & 11. 5
|
