800-867-8426 ? info@opticomm.com ? www.opticomm.com ? contact opticomm for custom requirements. remote configuration and easy testing OLX-3000 configuration commands are sent via a 10/100 ethernet connection using simple intuitive command sets. with regard to network testing, some of the most significant capabilities are: ? a u t o m a t i c a n d r e m o t e r e c o n f i g u r a t i o n a n d f a u l t e m u l a t i o n quickly establish links, emulate optical power breaks with and without path failures, make topology changes, and re-route point-to-point, loop or multicast connections. ? d y n a m i c d e v i c e t e s t i n g through out-of-band control the switch can simulate faults; also, the capability exists to identify improperly operating devices. ? i n c r e a s e d r e s o u r c e s h a r i n g c a p a b i l i t i e s switched connectivity between local or remote -- up to 50 km -- facilities and between devices allows testing without physically moving equipment. ? c a b l e a n d h a r d w a r e d i a g n o s t i c s quickly isolate interconnect problems; investigate whether the network can provide reliable data transfer over specified distances without touching cables; and test hardware configurations such as hubs. high-speed optical switching between ports the optilinx ? OLX-3000 is a versatile, multi-purpose, non-blocking transparent optical switch that provides high- speed switching between ports with minimal effect on overall network latency. the olx series is capable of switching digital signals up to 4.25 gb/s with any of its ports. both a 4ru 144 - port version and 8ru 288-port version are available. for smaller applications, see the 16-port olx-1000 series. system design the optilinx ? OLX-3000 is designed to accept up to three modular port cards with up to forty-eight small form-factor pluggable (sfp) transceiver modules per port card. each sfp transceiver module provides the physical ports for one input- output pair. different types of sfp transceivers support a variety of network configurations: ? 2.5, 2.125, 1.25 and 1.0625 gb/s and 4.25 gb/s link rates available ? 865, 1310 and 1550 gb/s optical media (contact opticomm for cwdm & dwdm wavelengths) ? links up to 80 km the optilinx ? OLX-3000 comes equipped with hot-swappable power supplies, fans and port cards to allow users to quickly replace parts without affecting system performance. the optilinx ? OLX-3000?s controlling software and non-volatile configuration data resides on the module. features ? remote monitoring and switching using opticomm?s linxview? software ? up to 288-port versions available ? full duplex switching capacity up to 612 gb/s ? hot-pluggable sfp transceivers on all port cards ? port cards, power supplies and fans are hot-swappable for maximum flexibility ? opticomm?s linxview? software allows the user to build configurations by dragging and dropping ports ? provides point-to-point, multiple loops, and multicast topologies simultaneously optilinx ? OLX-3000 4.25 gb/s 144-port optical switch opticomm reserves the right to change specifications without notice
hardware specifications dimensions with handles and mounting ears: 19.05? w x 7.0? h x 17.72? l (484 mm by 178 mm by 450 mm) rack mount: 17.13? w x 7.0? h x 15.75? l (435 mm by 178 mm by 400 mm) weight 43 lbs. (19.5 kg) storage temperature -40 c to +85 c operating temperature -10 c to +60 c humidity 10% to 90% (non-condensing) data rates up to 4.25 gbps per port (port card dependent) optical switching, routing and redundancy made in the usa sample configuration optiva ? configurable communication platform network management sdi & hd-sdi composite video, audio & data rgb/vga/dvi audio/fsk/intercom data (ethernet/serial/usb) catv/rf & l-band optical switching, routing & redundancy passive multiplexing solutions enclosures, racks & frames power supplies & accessories
|
