1/5 ? z00607ma standard 0.8a triac s september 2000 - ed: 3 main features: description the z00607ma is suitable for low power ac switching applications, such as fan speed, small light controllers... thanks to low gate triggering current, it can be directly driven by microcontrollers. symbol value unit i t(rms) 0.8 a v drm /v rrm 600 v i gt (q 1 ) 5ma absolute maximum ratings symbol parameter value unit i t(rms) rms on-state current (full sine wave) ti = 50c 0.8 a i tsm non repetitive surge peak on-state cur- rent (full cycle, tj initial = 25c) f = 50 hz t = 20 ms 9 a f = 60 hz t = 16.7 ms 9.5 i 2 ti 2 t value for fusing tp = 10 ms 0.55 a 2 s di/dt critical rate of rise of on-state current i g = 2 x i gt , tr 100 ns f = 120 hz tj = 110c 20 a/s i gm peak gate current tp = 20 s tj = 110c 1 a p g(av) average gate power dissipation tj = 110c 0.1 w t stg t j storage junction temperature range operating junction temperature range - 40 to + 150 - 40 to + 110 c g a2 a1 g a2 a1 to-92
z00607ma 2/5 electrical characteristics (tj = 25c, unless otherwise specified) static characteristics note 1: minimum igt is guaranted at 5% of igt max. note 2: for both polarities of a2 referenced to a1 thermal resistances product selector ordering information symbol test conditions quadrant value unit i g (1) v d = 12 v r l = 30 w i - ii - iii iv max. 5 7 ma v gt all max. 1.3 v v gd v d = v drm r l = 3.3 k w tj = 110c all min. 0.2 v i h (2) i t = 200 ma max. 5 ma i l i g = 1.2 i gt i - iii - iv max. 10 ma ii 20 dv/dt (2) v d = 67 %v drm gate open tj = 110c min. 10 v/s (dv/dt)c (2) (di/dt)c = 0.35 a/ms tj = 110c min. 1.5 v/s symbol test conditions value unit v tm (2) i tm = 1.1 a tp = 380 s tj = 25c max. 1.5 v v to (2) threshold voltage tj = 110c max. 0.95 v r d (2) dynamic resistance tj = 110c max. 420 m w i drm i rrm v drm = v rrm = 600 v tj = 25c max. 5a tj = 110c 0.1 ma symbol parameter value unit r th(j-l) junction to lead (ac) 60 c/w r th(j-a) junction to ambient 150 c/w part number voltage sensitivity type package z00607ma 600 v 5 ma standard to-92 z 006 07 m a 1ba2 triac series current: 0.8a sensitivity: 07: 5ma voltage: m: 600v package: a: to-92 packing mode: 1ba2: bulk 2bl2: ammopack blank
z00607ma 3/5 other information part number marking weight base quantity packing mode z00607ma 1ba2 z00607ma 0.2 g 2500 bulk z00607ma 2bl2 z00607ma 0.2 g 2500 ammopack fig. 1: maximum power dissipation versus rms on-state current (full cycle). fig. 2: rms on-state current versus ambient temperature (full cycle). fig. 3: relative variation of thermal impedance junction to ambient versus pulse duration. fig. 4: relative variation of gate trigger current, holding current and latching current versus junction temperature (typical values). 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 p(w) it(rms)(a) 0 10 20 30 40 50 60 70 80 90 100 110 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 it(rms)(a) rth(j-a)=rth(j-l) rth(j-a)=150c/w tamb(c) 1e-3 1e-2 1e-1 1e+0 1e+1 1e+2 5e+2 0.01 0.10 1.00 k=[zth(j-a)/rth(j-a)] tp(s) -40 -20 0 20 40 60 80 100 120 0.0 0.5 1.0 1.5 2.0 2.5 igt,ih,il [tj] / igt,ih,il [tj=25c] igt ih & il tj(c)
z00607ma 4/5 fig. 5: surge peak on-state current versus number of cycles. fig. 6: non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10ms, and corresponding value of i2t. fig. 7: on-state characteristics (maximum values). fig. 8: relative variation of critical rate of decrease of main current versus (dv/dt)c (typical values). fig. 9: relative variation of critical rate of decrease of main current versus junction temperature. 1 10 100 1000 0 1 2 3 4 5 6 7 8 9 10 itsm(a) non repetitive tj initial=25c repetitive tamb=25c one cycle t=20ms number of cycles 0.01 0.10 1.00 10.00 0.1 1.0 10.0 100.0 200.0 itsm (a), i2t (a2s) tj initial=25c itsm i2t di/dt limitation: 20a/s tp (ms) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0.1 1.0 10.0 itm(a) tj=25c tj max. vto= 0.95 v rd= 420 m w tj=tj max. vtm(v) 0.1 1.0 10.0 0.0 2.0 4.0 6.0 8.0 10.0 (di/dt)c [(dv/dt)c] / specified (di/dt)c (dv/dt)c (v/s) 0 102030405060708090100110 0 1 2 3 4 5 6 (di/dt)c [tj] / (di/dt)c [tj specified] tj (c)
z00607ma 5/5 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the co nsequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publicati on are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics prod ucts are not authorized for use as critical components in life support devices or systems without express written approval of stmicroelectro nics. ? the st logo is a registered trademark of stmicroelectronics ? 2000 stmicroelectronics - printed in italy - all rights reserved stmicroelectronics group of companies australia - brazil - china - finland - france - germany - hong kong - india - italy - japan - malaysia - malta - morocco singapore - spain - sweden - switzerland - united kingdom http://www.st.com package mechanical data to-92 (plastic) ref. dimensions millimeters inches min. typ. max. min. typ. max. a 1.35 0.053 b 4.70 0.185 c 2.54 0.100 d 4.40 0.173 e 12.70 0.500 f 3.70 0.146 a 0.45 0.017 d f a e b a c
|
