vishay siliconix SIA910EDJ new product document number: 65535 s09-2267-rev. a, 02-nov-09 www.vishay.com 1 dual n-channel 12-v (d-s) mosfet product summary v ds (v) r ds(on) ( ) i d (a) a q g (typ.) 12 0.028 at v gs = 4.5 v 4.5 6.2 nc 0.033 at v gs = 2.5 v 4.5 0.042 at vgs = 1.8 v 4.5 s 1 d 1 g 2 s 2 g 1 d 2 1 6 5 4 2 3 2.05 mm 2.05 mm powerpak sc-70-6 dual d 1 d 2 orderin g information: SIA910EDJ-t1-ge3 (lead (p b )-free and halogen-free) markin g code x x x c f x lot tracea b ility a n d d a t e code part # code n-channel mosfet n-channel mosfet s 2 d 2 g 2 s 1 d 1 g 1 notes: a. package limited b. surface mounted on 1" x 1" fr4 board. c. t = 5 s. d. see solder profile ( www.vishay.com/ppg?73257 ). the powerpak sc-70 is a leadless package. the end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. a solder fillet at the exposed copper tip cannot b e guaranteed and is not required to ensure adequat e bottom side solder interconnection. e. rework conditions: manual soldering with a sold ering iron is not recommended for leadless components. f. maximum under steady state conditions is 110 c/w. absolute maximum ratings t a = 25 c, unless otherwise noted parameter symbol limit unit drain-source voltage v ds 12 v gate-source voltage v gs 8 continuous drain current (t j = 150 c) t c = 25 c i d 4.5 a a t c = 70 c 4.5 a t a = 25 c 4.5 a, b, c t a = 70 c 4.5 a, b, c pulsed drain current i dm 20 continuous source-drain diode current t c = 25 c i s 4.5 a t a = 25 c 1.6 b, c maximum power dissipation t c = 25 c p d 7.8 w t c = 70 c 5 t a = 25 c 1.9 b, c t a = 70 c 1.2 b, c operating junction and storage temperature range t j , t stg - 55 to 150 c soldering recommendations (peak temperature) d, e 260 thermal resistance ratings parameter symbol typical maximum unit maximum junction-to-ambient b, f t 5 s r thja 52 65 c/w maximum junction-to-case (drain) steady state r thjc 12.5 16 features ? halogen-free according to iec 61249-2-21 definition ? trenchfet ? power mosfet ? new thermally enhanced powerpak ? sc-70 package - small footprint area - low on-resistance ? typical esd protection: 2400 v ? 100 % r g tested ? compliant to rohs directive 2002/95/ec applications ? load switch for portable applications ? high frequency dc-to-dc converter ? dc/dc converter
www.vishay.com 2 document number: 65535 s09-2267-rev. a, 02-nov-09 vishay siliconix SIA910EDJ new product notes: a. pulse test; pulse width 300 s, duty cycle 2 % b. guaranteed by design, not s ubject to production testing. stresses beyond those listed under ?absolute maximum ratings? ma y cause permanent damage to the device. these are stress rating s only, and functional operation of the device at these or any other condit ions beyond those indicated in the operational sections of the specifications is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. specifications t j = 25 c, unless otherwise noted parameter symbol test conditions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0 v, i d = 250 a 12 v v ds temperature coefficient v ds /t j i d = 250 a 8 mv/c v gs(th) temperature coefficient v gs(th) /t j - 2.5 gate-source threshold voltage v gs(th) v ds = v gs , i d = 250 a 0.4 1.0 v gate-source leakage i gss v ds = 0 v, v gs = 8 v 5 a v ds = 0 v, v gs = 4.5 v 0.5 zero gate voltage drain current i dss v ds = 12 v, v gs = 0 v 1 v ds = 12 v, v gs = 0 v, t j = 55 c 10 on-state drain current a i d(on) v ds 5 v, v gs = 4.5 v 10 a drain-source on-state resistance a r ds(on) v gs = 4.5 v, i d = 5.2 a 0.023 0.028 v gs = 2.5 v, i d = 4.8 a 0.027 0.033 v gs = 1.8 v, i d = 2.5 a 0.035 0.042 forward transconductance a g fs v ds = 10 v, i d = 5.2 a 23 s dynamic b input capacitance c iss v ds = 10 v, v gs = 0 v, f = 1 mhz 455 pf output capacitance c oss 190 reverse transfer capacitance c rss 150 total gate charge q g v ds = 10 v, v gs = 8 v, i d = 6.8 a 10.5 16 nc v ds = 10 v, v gs = 4.5 v, i d = 6.8 a 6.2 9.5 gate-source charge q gs 0.8 gate-drain charge q gd 1.6 gate resistance r g f = 1 mhz 0.8 4 8 tu r n - o n d e l ay t i m e t d(on) v dd = 10 v, r l = 1.9 i d ? 5.4 a, v gen = 4.5 v, r g = 1 10 15 ns rise time t r 12 20 turn-off delay time t d(off) 25 40 fall time t f 12 20 tu r n - o n d e l ay t i m e t d(on) v dd = 10 v, r l = 1.9 i d ? 5.4 a, v gen = 10 v, r g = 1 510 rise time t r 10 15 turn-off delay time t d(off) 20 30 fall time t f 10 15 drain-source body diode characteristics continuous source-drain diode current i s t c = 25 c 4.5 a pulse diode forward current i sm 20 body diode voltage v sd i s = 5.4 a, v gs = 0 v 0.8 1.2 v body diode reverse recovery time t rr i f = 5.4 a, di/dt = 100 a/s, t j = 25 c 25 50 ns body diode reverse recovery charge q rr 10 20 nc reverse recovery fall time t a 13 ns reverse recovery rise time t b 12
document number: 65535 s09-2267-rev. a, 02-nov-09 www.vishay.com 3 vishay siliconix SIA910EDJ new product typical characteristics 25 c, unless otherwise noted gate current vs. gate-source voltage output characteristics on-resistance vs. drain current and gate voltage - gate c u rrent (ma) i gss v gs - gate-to-so u rce v oltage ( v ) 0 1 2 3 4 03691215 t j =25 c 0 4 8 12 16 20 0.0 0.5 1.0 1.5 2.0 2.5 3.0 v gs =5 v thr u 2 v v gs =1.5 v v gs =1 v v ds - drain-to-so u rce v oltage ( v ) - drain c u rrent (a) i d - on-resistance ( ) r ds(on) i d - drain c u rrent (a) 0.00 0.02 0.04 0.06 0.0 8 0 5 10 15 20 v gs =4.5 v v gs =2.5 v v gs =1. 8v gate current vs. gate-source voltage transfer characteristics capacitance - gate c u rrent (a) i gss v gs - gate-to-so u rce v oltage ( v ) 10 -10 10 -9 10 - 8 10 -7 10 -6 10 -5 10 -4 10 -3 10 -2 03691215 t j = 150 c t j = 25 c 0 2 4 6 8 10 0.0 0.3 0.6 0.9 1.2 1.5 t c = 25 c t c = 125 c t c = - 55 c v gs - gate-to-so u rce v oltage ( v ) - drain c u rrent (a) i d 0 200 400 600 8 00 036912 c iss c oss c rss v ds - drain-to-so u rce v oltage ( v ) c - capacitance (pf)
www.vishay.com 4 document number: 65535 s09-2267-rev. a, 02-nov-09 vishay siliconix SIA910EDJ new product typical characteristics 25 c, unless otherwise noted gate charge source-drain diode forward voltage threshold voltage 0 2 4 6 8 04 8 12 v ds =9.6 v v ds =6 v i d =6. 8 a v ds =3 v - gate-to-so u rce v oltage ( v ) q g - total gate charge (nc) v gs 0.1 1 10 100 0.0 0.2 0.4 0.6 0. 8 1.0 1.2 t j = 25 c t j = 150 c v sd -so u rce-to-drain v oltage ( v ) - so u rce c u rrent (a) i s 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 - 50 - 25 0 25 50 75 100 125 150 i d = 250 a ( v ) v gs(th) t j - temperat u re (c) on-resistance vs. junction temperature on-resistance vs. gate-to-source voltage single pulse power (junction-to-ambient) 0.7 0. 8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 - 50 - 25 0 25 50 75 100 125 150 v gs =4.5 v ,2.5 v ;i d =5.5a v gs =1. 8v ;i d =2.5a t j -j u nction temperat u re (c) ( n ormalized) - on-resistance r ds(on) 0.00 0.02 0.04 0.06 0.0 8 012345 i d = 5.2 a; t j = 25 c i d =2.5a; t j = 25 c i d = 5.2 a; t j = 125 c i d =2.5a;t j = 125 c - on-resistance ( ) r ds(on) v gs - gate-to-so u rce v oltage ( v ) 1000 100 1 0.001 0.01 0.1 10 po w er ( w ) p u lse (s) 20 10 5 15 0
document number: 65535 s09-2267-rev. a, 02-nov-09 www.vishay.com 5 vishay siliconix SIA910EDJ new product typical characteristics 25 c, unless otherwise noted * the power dissipation p d is based on t j(max) = 150 c, using junction-to-case thermal resi stance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. it is used to determ ine the current rating, when this rating falls below the package limit. safe operating area, junction-to-ambient 100 1 0.1 1 10 100 0.01 10 0.1 t a =25 c single p u lse 100 ms limited b yr ds(on) * b v dss limited 1ms 100 s 10 ms 1s,10s dc v ds - drain-to-so u rce v oltage ( v ) * v gs > minim u m v gs at w hich r ds(on) is specified - drain c u rrent (a) i d current derating* 0 3 6 9 12 15 0 25 50 75 100 125 150 package limited t c - case temperat u re (c) i d - drain c u rrent (a) power derating 0 2 4 6 8 25 50 75 100 125 150 t c - case temperat u re (c) po w er dissipation ( w )
www.vishay.com 6 document number: 65535 s09-2267-rev. a, 02-nov-09 vishay siliconix SIA910EDJ new product typical characteristics 25 c, unless otherwise noted vishay siliconix maintains worldwide manufacturing capability. products may be manufactured at one of several qualified locatio ns. reliability data for silicon technology and package reliability represent a composite of all qualified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?65535 . normalized thermal transient im pedance, junction-to-ambient 1 0.1 0.01 normalized e f f ective t ransient thermal impedance 10 -3 10 -2 1 10 1000 10 -1 10 -4 100 square wave pulse duration (s) single pulse 0.02 0.05 0.1 0.2 duty cycle = 0.5 1. duty cycle, d = 2. per unit base = r th ja = 110 c/w 3. t jm - t a = p dm z th ja (t) t 1 t 2 t 1 t 2 notes: 4. surface mounted p dm normalized thermal transient impedance, junction-to-case 10 -3 10 -2 10 -1 10 -4 1 0.01 square wave pulse duration (s) normalized ef fective t ransient thermal impedance duty cycle = 0.5 0.2 0.1 single pulse 0.02 0.05
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
