View TS3A24159DRCR_3131221.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

features applications description/ordering information ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 cell phones specified break-before-make switching pdas low on-state resistance (0.3 w max) portable instrumentation low charge injection audio and video signal routing excellent on-state resistance matching low-voltage data-acquisition systems low total harmonic distortion (thd) communication circuits 1.65-v to 3.6-v single-supply operation modems control inputs are 1.8-v logic compatible hard drives latch-up performance exceeds 100 ma per computer peripherals jesd 78, class ii wireless terminals and peripherals esd performance tested per jesd 22 ? 2000-v human-body model (a114-b, class ii) ? 1000-v charged-device model (c101) the ts3a24159 is a dual single-pole double-throw (spdt) analog switch that is designed to operate from 1.65 v to 3.6 v. it offers low on-state resistance and excellent on-state resistance matching with the break-before-make feature, to prevent signal distortion during the transferring of a signal from one channel to another. the device has excellent total harmonic distortion (thd) performance and consumes very low power. these features make this device suitable for portable audio applications. ordering information t a package (1) orderable part number top-side marking nanofree? (dsbga) ? yzp reel of 3000 ts3a24159yzpr preview ?40 c to 85 c vssop ? dgs (msop) reel of 2500 ts3a24159dgsr l8r qfn ? drc (son) reel of 3000 TS3A24159DRCR zws (1) for the most current package and ordering information, see the package option addendum at the end of this document, or see the ti website at www.ti.com . please be aware that an important notice concerning availability, standard warranty, and use in critical applications of texas instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. nanofree is a trademark of texas instruments. unless otherwise noted this document contains copyright ? 2007, texas instruments incorporated production data information current as of publication date. products conform to specifications per the terms of texas instruments standard warranty. production processing does not necessarily include testing of all parameters. www.ti.com msop package (top view) v + no1 com1 in1 nc1 1 2 3 4 5 no2com2 in2 nc2 gnd 10 9 8 7 6 nanofree? package (top view) nc2in2 com2 no2 nc1 in1 com1 no1 c1 c2 c4 b4 a3 a2 a1 b1 a4 c3 gnd v + v + no1 com1 in1 nc1 no2com2 in2 nc2 gnd son package (top view) 10 98 7 6 1 2 3 4 5
ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 summary of characteristics (1) dual 2:1 multiplexer/demultiplexer configuration (2 spdt) number of channels 2 on-state resistance (r on ) 0.3 w max on-state resistance match ( d r on ) 0.05 w max on-state resistance flatness (r on(flat) ) 0.04 w max turn-on/turn-off time (t on /t off ) 20 ns/12 ns break-before-make time (t bbm ) 10 ns charge injection (q c ) 9 pc bandwidth (bw) 23 mhz off isolation (o iso ) ?72 db crosstalk (x talk ) ?96 db total harmonic distortion (thd) 0.003% power-supply current (i + ) 15 na package options 10-pin msop, son, wcsp (1) v + = 2.7 v, t a = 25 c function table nc to com, no to com, in com to nc com to no l on off h off on 2 submit documentation feedback www.ti.com
absolute maximum ratings (1) (2) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 over operating free-air temperature range (unless otherwise noted) min max unit v + supply voltage range (3) ?0.5 3.6 v v nc v no analog voltage range (3) (4) (5) ?0.5 v + + 0.5 v v com i i/ok analog port diode current v nc , v no , v com < 0 ?50 50 ma i nc on-state switch current ?300 300 i no v nc , v no , v com = 0 to v + ma on-state peak switch current (6) ?500 500 i com v i digital input voltage range ?0.5 3.6 v i ik digital input clamp current (3) (4) v i < 0 ?50 ma i + continuous current through v+ 100 ma i gnd continuous current through gnd ?100 ma dgs package 165 q ja package thermal impedance (7) drc package 56.5 c/w yzp package tbd t stg storage temperature range ?65 150 c (1) stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. these are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. (3) all voltages are with respect to ground, unless otherwise specified. (4) the input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. (5) this value is limited to 5.5 v maximum. (6) pulse at 1-ms duration <10% duty cycle. (7) the package thermal impedance is calculated in accordance with jesd 51-7. 3 submit documentation feedback www.ti.com
electrical characteristics for 3-v supply (1) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 v + = 2.7 to 3.6 v, t a = ?40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no , 0 v + v range v nc 25 c 0.2 0.3 peak on 0 (v no or v nc ) v + , switch on, r peak 2.7 v w resistance i com = ?100 ma, see figure 10 full 0.35 25 c 0.26 0.3 on-state v no or v nc = 2 v, switch on, r on 2.7 v w resistance i com = ?100 ma, see figure 10 full 0.34 on-state 25 c 0.01 0.05 v no or v nc = 2 v, 0.8 v, switch on, resistance match d r on 2.7 v w i com = ?100 ma, see figure 10 full 0.05 between channels 0 (v no or v nc ) v + , switch on, 25 c 0.13 w i com = ?100 ma, see figure 10 on-state r on(flat) 2.7 v resistance flatness 25 c 0.01 0.04 v no or v nc = 2 v, 0.8 v, switch on, w i com = ?100 ma, see figure 10 full 0.05 nc, no v nc or v no = 1 v, v com = 3 v, 25 c ?10 10 i nc(off) , switch off, off leakage or 3.6 v na i no(off) see figure 11 full ?50 50 current v nc or v no = 3 v, v com = 1 v, nc, no v nc or v no = 1 v, v com = open, 25 c ?10 10 i nc(on) , switch on, on leakage or 3.6 v na i no(on) see figure 12 full ?100 100 current v nc or v no = 3 v, v com = open, com v nc or v no = open, v com = 1 v, 25 c ?10 10 switch on, on leakage i com(on) or 3.6 v na see figure 12 full ?100 100 current v nc or v no = open, v com = 3 v, digital control inputs (in1, in2) (2) input logic high v ih full 1.4 v input logic low v il full 0.5 v 25 c ?40 5 40 input leakage i ih , i il v i = 3.6 v or 0 3.6 v na current full ?50 50 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (2) all unused digital inputs of the device must be held at v + or gnd to ensure proper device operation. refer to the ti application report, implications of slow or floating cmos inputs, literature number scba004. 4 submit documentation feedback www.ti.com
electrical characteristics for 3-v supply (1) (continued) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 v + = 2.7 to 3.6 v, t a = ?40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 3 v 20 35 v com = v + , c l = 35 pf, turn-on time t on ns 2.7 v to r l = 50 w , see figure 14 full 40 3.6 v 25 c 3 v 12 25 v com = v + , c l = 35 pf, turn-off time t off ns 2.7 v to r l = 50 w , see figure 14 full 30 3.6 v 25 c 3 v 1 10 25 break-before- v nc = v no = v + , c l = 35 pf, t bbm ns 2.7 v to make time r l = 50 w , see figure 15 full 0.5 30 3.6 v v gen = 0, c l = 1 nf, charge injection q c 25 c 3 v 9 pc r gen = 0, see figure 19 nc, no c nc(off) , v nc or v no = v + or gnd, see figure 13 25 c 3 v 90 pf off capacitance c no(off) switch off, nc, no c nc(on) , v nc or v no = v + or gnd, see figure 13 25 c 3 v 224 pf on capacitance c no(on) switch on, com v com = v + or gnd, c com(on) see figure 13 25 c 3 v 250 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 13 25 c 3 v 2 pf capacitance r l = 50 w , bandwidth bw seefigure 16 25 c 3 v 23 mhz switch on, r l = 50 w , off isolation o iso see figure 17 25 c 3 v ?72 db f = 1 mhz, r l = 50 w , crosstalk x talk see figure 18 25 c 3 v ?96 db f = 1 mhz, total harmonic r l = 600 w , f = 20 hz to 20 khz, thd 25 c 3 v 0.003 % distortion c l = 50 pf, see figure 20 supply 25 c 15 100 na positive supply i + v i = v + or gnd 3.6 v current full 1 m a (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum 5 submit documentation feedback www.ti.com
electrical characteristics for 2.5-v supply (1) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 v + = 2.3 to 2.7 v, t a = ?40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no , 0 v + v range v nc 25 c 0.35 peak on 0 (v no or v nc ) v + , switch on, r peak 2.3 v w resistance i com = ?8 ma, see figure 10 full 0.45 25 c on-state v no or v nc = 1.8 v, switch on, r on 2.3 v w resistance i com = ?8 ma, see figure 10 full 0.4 on-state 25 c 0.01 0.05 v no or v nc = 1.8 v, 0.8 v, switch on, resistance match d r on 2.3 v w i com = ?8 ma, see figure 10 full 0.05 0.05 between channels 0 (v no or v nc ) v + , switch on, 25 c 0.05 i com = ?8 ma, see figure 10 on-state r on(flat) 2.3 v w resistance flatness 25 c 0.03 0.08 v no or v nc = 0.8 v, 1.8 v, switch on, i com = ?8 ma, see figure 10 full 0.1 nc, no v nc or v no = 0.5 v, v com = 2.2 v, 25 c ?10 10 i nc(off) , switch off, off leakage or 2.7 v na i no(off) see figure 11 full ?50 50 current v nc or v no = 2.2 v, v com = 0.5 v, nc, no v nc or v no = 0.5 v, v com = open, 25 c ?10 10 i nc(on) , switch on, on leakage or 2.7 v na i no(on) see figure 12 full ?100 100 current v nc or v no = 2.2 v, v com = open, com v nc or v no = open, v com = 0.5 v, 25 c ?10 10 switch on, on leakage i com(on) or 2.7 v na see figure 12 full ?100 100 current v nc or v no = open, v com = 2.2 v, digital control inputs (in1, in2) (2) input logic high v ih full 1.25 v input logic low v il full 0.5 v 25 c ?40 5 40 input leakage i ih , i il v i = 2.7 v or 0 2.7 v na current full ?50 50 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. (2) all unused digital inputs of the device must be held at v + or gnd to ensure proper device operation. refer to the ti application report, implications of slow or floating cmos inputs, literature number scba004. 6 submit documentation feedback www.ti.com
electrical characteristics for 2.5-v supply (1) (continued) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 v + = 2.3 to 2.7 v, t a = ?40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 2.5 v 23 45 v com = v + , c l = 35 pf, turn-on time t on ns 2.3 v to r l = 50 w , see figure 14 full 50 2.7 v 25 c 2.5 v 17 27 v com = v + , c l = 35 pf, turn-off time t off ns 2.3 v to r l = 50 w , see figure 14 full 30 2.7 v 25 c 2.5 v 2 14 30 break-before- v nc = v no = v + , c l = 35 pf, t bbm ns 2.3 v to make time r l = 50 w , see figure 15 full 1 35 2.7 v v gen = 0, c l = 1 nf, charge injection q c 25 c 2.5 v 8 pc r gen = 0, see figure 19 nc, no c nc(off) , v nc or v no = v + or gnd, see figure 13 25 c 2.5 v 90 pf off capacitance c no(off) switch off, nc, no c nc(on) , v nc or v no = v + or gnd, see figure 13 25 c 2.5 v 250 pf on capacitance c no(on) switch on, com v com = v + or gnd, c com(on) see figure 13 25 c 2.5 v 250 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 13 25 c 2.5 v 2 pf capacitance r l = 50 w , bandwidth bw see figure 16 25 c 2.5 v 23 mhz switch on, r l = 50 w , off isolation o iso see figure 17 25 c 2.5 v ?72 db f = 1 mhz, r l = 50 w , crosstalk x talk see figure 18 25 c 2.5 v ?96 db f = 1 mhz, total harmonic r l = 600 w , f = 20 hz to 20 khz, thd 25 c 2.5 v 0.003 % distortion c l = 50 pf, see figure 20 supply 25 c 10 100 positive supply i + v i = v + or gnd 2.7 v na current full 700 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum. 7 submit documentation feedback www.ti.com
electrical characteristics for 1.8-v supply (1) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 v + = 1.65 to 1.95 v, t a = ?40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit analog switch analog signal v com , v no , 0 v + v range v nc 25 c 0.4 0.9 peak on 0 (v no or v nc ) v + , switch on, r peak 1.65 v w resistance i com = ?2 ma, see figure 10 full 0.8 25 c 0.3 0.45 on-state v no or v nc = 1.5 v, switch on, r on 1.65 v w resistance i com = ?2 ma, see figure 10 full 0.5 on-state 25 c 0.02 0.04 resistance match v no or v nc = 0.6 v, 1.5 v, switch on, d r on 1.65 v w between i com = ?2 ma, see figure 10 full 0.05 channels 0 (v no or v nc ) v + , switch on, 25 c 0.13 on-state i com = ?2 ma, see figure 10 resistance r on(flat) 1.65 v w 25 c 0.08 0.15 v no or v nc = 0.6 v, 1.5 v, switch on, flatness i com = ?8 ma, see figure 10 full 0.2 nc, no v nc or v no = 0.3 v, v com = 1.65 v, 25 c ?10 10 i nc(off) , switch off, off leakage or 1.95 na i no(off) see figure 11 full ?50 50 current v nc or v no = 1.65 v, v com = 0.3 v, nc, no v nc or v no = 0.3 v, v com = open, 25 c ?10 10 i nc(on) , switch on, on leakage or 1.95 v na i no(on) see figure 12 full ?100 100 current v nc or v no = 1.65 v, v com = open, com v nc or v no = open, v com = 0.3 v, 25 c ?10 10 switch on, on leakage i com(on) or 1.95 v na see figure 12 full ?100 100 current v nc or v no = open, v com = 1.65 v, digital control inputs (in1, in2) (2) input logic high v ih full 1 v input logic low v il full 0.4 v 25 c ?40 5 40 input leakage i ih , i il v i = 1.95 v or 0 1.95 v na current full ?50 50 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum (2) all unused digital inputs of the device must be held at v + or gnd to ensure proper device operation. refer to the ti application report, implications of slow or floating cmos inputs, literature number scba004. 8 submit documentation feedback www.ti.com
electrical characteristics for 1.8-v supply (1) (continued) ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 v + = 1.65 to 1.95 v, t a = ?40 c to 85 c (unless otherwise noted) parameter symbol test conditions t a v + min typ max unit dynamic 25 c 1.8 v 53 75 v com = v + , c l = 35 pf, turn-on time t on ns 1.65 v to r l = 50 w , see figure 14 full 30 1.95 v 25 c 1.8 v 24 35 v com = v + , c l = 35 pf, turn-off time t off ns 1.65 v to r l = 50 w , see figure 14 full 40 1.95 v 25 c 1.8 v 2 30 40 break-before- v nc = v no = v + , c l = 35 pf, t bbm ns 1.65 v to make time r l = 50 w , see figure 15 full 1 50 1.95 v v gen = 0, c l = 1 nf, charge injection q c 25 c 1.8 v 5 pc r gen = 0, seefigure 19 nc, no c nc(off) , v nc or v no = v + or gnd, see figure 13 25 c 1.8 v 90 pf off capacitance c no(off) switch off, nc, no c nc(on) , v nc or v no = v + or gnd, see figure 13 25 c 1.8 v 250 pf on capacitance c no(on) switch on, com v com = v + or gnd, c com(on) see figure 13 25 c 1.8 v 250 pf on capacitance switch on, digital input c i v i = v + or gnd, see figure 13 25 c 1.8 v 2 pf capacitance r l = 50 w , bandwidth bw see figure 16 25 c 1.8 v 23 mhz switch on, r l = 50 w , off isolation o iso see figure 17 25 c 1.8 v ?73 db f = 1 mhz, r l = 50 w , crosstalk x talk see figure 18 25 c 1.8 v ?97 db f = 1 mhz, total harmonic r l = 600 w , f = 20 hz to 20 khz, thd 25 c 1.8 v 0.005 % distortion c l = 50 pf, see figure 20 supply 25 c 100 50 positive supply i + v i = v + or gnd 1.95 v na current full 700 (1) the algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum 9 submit documentation feedback www.ti.com
typical performance ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 figure 1. r on vs v com figure 2. r on vs v com (v+ = 1.65 v) (v + = 2.3 v) figure 3. r on vs v com figure 4. charge injection (q c ) vs v com (v + = 2.7 v) (t a = 25 c) figure 5. t on and t off vs supply voltage figure 6. bandwidth (t a = 25 c) 10 submit documentation feedback www.ti.com ? 20 ? 18 ? 16 ? 14 ? 12 ? 10 ? 8 ? 6 ? 4 ? 2 0 1e+04 1e+05 1e+06 1e+07 1e+08 1e+09 frequency (hz) gain (db) 3.0 v 0 5 10 15 20 25 30 35 1.65 1.8 1.95 2.3 2.5 2.7 3 3.3 3.6 supply voltage (v ) + t on t off t / on t (ns) off ? 300 ? 250 ? 200 ? 150 ? 100 -50 0 50 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.5 2.7 3.0 v (v) com q (pc) c 1.8 v 2.5 v 3 v 0.000 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.450 0.500 0.00 0.10 0.20 0 .30 0.40 0.50 0.5 9 0.69 0 .79 0.89 0.99 1.09 1.19 1.29 1.39 1.49 1.58 v (v) com r ( ) on ! ? 40 c 25 c 85 c 0.000 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.00 0.16 0.32 0 .49 0.65 0.81 0.9 7 1.13 1 .30 1.46 1.62 1.78 1.94 2.11 2.27 2.43 2.59 ? 40 c 25 c 85 c r ( ) on ! v (v) com 0.000 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400 0.00 0.14 0.28 0 .41 0.55 0.69 0.8 3 0.97 1 .10 1.24 1.38 1.52 1.66 1.79 1.93 2.07 2.21 r ( ) on ! v (v) com ? 40 c 25 c 85 c
ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 typical performance (continued) figure 7. off isolation figure 8. crosstalk figure 9. total harmonic distortion vs frequency 11 submit documentation feedback www.ti.com 1.8v 2.5v 3.0v ?12 0 ?10 0 ? 80 ? 60 ? 40 ? 20 0 1e+04 1e+05 1e+06 1e+07 1e+08 1e+09 frequency (hz) attenuation (db) 0.000 0.001 0.002 0.003 0.004 0.005 0.006 0.007 0.008 0.009 1e+00 1e+01 1e+02 1e+03 1e+04 1e+05 frequency (hz) thd (%) 1.8 v 2.5 v 3.0 v ? 90 ? 80 ? 70 ? 60 ? 50 ? 40 ? 30 ? 20 ? 10 0 1e+04 1e+05 1e+06 1e+07 1e+08 1e+09 frequency (hz) attenuation (db) 1.8 v 2.5 v 3.0 v
parameter measurement information ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 figure 10. on-state resistance figure 11. off-state leakage current (i nc(off) , i nc(pwroff) , i no(off) , i no(pwroff) , i com(off) , i com(pwroff) ) figure 12. on-state leakage current (i com(on) , i nc(on) , i no(on) ) 12 submit documentation feedback www.ti.com channel on on?state leakage current v i = v ih or v il v + gnd nc v i no com v com v no v nc + + in v + i com r on = i com gnd channel on nc v i no com v com v i = v ih or v il v no v nc + + in v com v no or v nc channel off off?state leakage current v i = v ih or v il v + gnd nc v i no com v com v no v nc + + + in
ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 parameter measurement information (continued) figure 13. capacitance (c i , c nc(off) , c no(off) , c nc(on) , c no(on) ) (1) all input pulses are supplied by generators having the following characteristics: prr 10 mhz, z o = 50 w , t r < 5 ns, t f < 5 ns. (2) c l includes probe and jig capacitance. figure 14. turn-on (t on ) and turn-off time (t off ) 13 submit documentation feedback www.ti.com channel on on?state leakage current v i = v ih or v il v + gnd nc v i no com v com v no v nc + + in c l (2) r l v com v + gnd nc or no v nc or v no v i nc or no com (1) v + v com 5 0 w r l c l 35 pf t on test v + 5 0 w 35 pf t off 50% t on t off 50% 90% 90% logic input (v i ) v + (v nc or v no ) 0 c l (2) r l in
ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 parameter measurement information (continued) (1) all input pulses are supplied by generators having the following characteristics: prr 10 mhz, z o = 50 w , t r < 5 ns, t f < 5 ns. (2) c l includes probe and jig capacitance. figure 15. break-before-make time (t bbm ) figure 16. bandwidth (bw) 14 submit documentation feedback www.ti.com v + gnd nc or no v nc or v no v i nc or no com v com c l (2) r l t bbm 50% 90% 90% logic input (v i ) (v com ) v + 0 in v nc or v no = v + r l = 50 c l = 35 pf logic input (1) v + gnd nc v i no com 5 0 5 0 v nc v com channel on: nc to com network analyzer setup sourc e p owe r = 0 d bm (632-m v p - p a t 5 0- l oad) dc bias = 350 mv network analyzer source signal + v i = v + or gnd in
ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 parameter measurement information (continued) figure 17. off isolation (o iso ) figure 18. crosstalk (x talk ) 15 submit documentation feedback www.ti.com nc no com v nc v com channel off: nc to com network analyzer setup source power = 0 dbm(632-mv p-p at 50- 5 0 v + gnd 5 0 5 0 network analyzer source signal v i + v i = v + or gnd in dc bias = 350 mv nc no 50 5 0 v nc v com channel on: nc to com network analyzer setup source power = 0 dbm(632-mv p-p at 50- 5 0 v + gnd v no source signal channel off: no to com network analyzer v i + v i = v + or gnd in dc bias = 350 mv
ts3a24159 0.3- w dual spdt analog switch dual-channel 2:1 multiplexer/demultiplexer scds238 ? march 2007 parameter measurement information (continued) (1) all input pulses are supplied by generators having the following characteristics: prr 10 mhz, z o = 50 w , t r < 5 ns, t f < 5 ns. (2) c l includes probe and jig capacitance. figure 19. charge injection (q c ) (1) c l includes probe and jig capacitance. figure 20. total harmonic distortion (thd) 16 submit documentation feedback www.ti.com v + gnd nc or no in r gen v i nc or no com v com c l (2) off v com on off d v com v gen + v i = v ih or v il c l = 1 nf v gen = 0 to v + r gen = 0 q c = c l ?d v com v ih v il logic input (v i) logic input (1) v + gnd no com 10 f c l (1) r l v + /2 1 0 f in v i 60 0 60 0 60 0 audio analyzer source signal v source = v + p-p source signal = 20 hz to 20 khz channel on: com to no v i = v ih or v il r l = 600 c l = 50 pf
packaging information orderable device status (1) package type package drawing pins package qty eco plan (2) lead/ball finish msl peak temp (3) ts3a24159dgsr active msop dgs 10 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim ts3a24159dgsrg4 active msop dgs 10 2500 green (rohs & no sb/br) cu nipdau level-1-260c-unlim TS3A24159DRCR active son drc 10 3000 green (rohs & no sb/br) cu nipdau level-2-260c-1year TS3A24159DRCRg4 active son drc 10 3000 green (rohs & no sb/br) cu nipdau level-2-260c-1year (1) the marketing status values are defined as follows: active: product device recommended for new designs. lifebuy: ti has announced that the device will be discontinued, and a lifetime-buy period is in effect. nrnd: not recommended for new designs. device is in production to support existing customers, but ti does not recommend using this part in a new design. preview: device has been announced but is not in production. samples may or may not be available. obsolete: ti has discontinued the production of the device. (2) eco plan - the planned eco-friendly classification: pb-free (rohs), pb-free (rohs exempt), or green (rohs & no sb/br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. tbd: the pb-free/green conversion plan has not been defined. pb-free (rohs): ti's terms "lead-free" or "pb-free" mean semiconductor products that are compatible with the current rohs requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. where designed to be soldered at high temperatures, ti pb-free products are suitable for use in specified lead-free processes. pb-free (rohs exempt): this component has a rohs exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. the component is otherwise considered pb-free (rohs compatible) as defined above. green (rohs & no sb/br): ti defines "green" to mean pb-free (rohs compatible), and free of bromine (br) and antimony (sb) based flame retardants (br or sb do not exceed 0.1% by weight in homogeneous material) (3) msl, peak temp. -- the moisture sensitivity level rating according to the jedec industry standard classifications, and peak solder temperature. important information and disclaimer: the information provided on this page represents ti's knowledge and belief as of the date that it is provided. ti bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. efforts are underway to better integrate information from third parties. ti has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ti and ti suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. in no event shall ti's liability arising out of such information exceed the total purchase price of the ti part(s) at issue in this document sold by ti to customer on an annual basis. package option addendum www.ti.com 17-may-2007 addendum-page 1

important notice texas instruments incorporated and its subsidiaries (ti) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. all products are sold subject to ti?s terms and conditions of sale supplied at the time of order acknowledgment. ti warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ti?s standard warranty. testing and other quality control techniques are used to the extent ti deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ti assumes no liability for applications assistance or customer product design. customers are responsible for their products and applications using ti components. to minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. ti does not warrant or represent that any license, either express or implied, is granted under any ti patent right, copyright, mask work right, or other ti intellectual property right relating to any combination, machine, or process in which ti products or services are used. information published by ti regarding third-party products or services does not constitute a license from ti to use such products or services or a warranty or endorsement thereof. use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from ti under the patents or other intellectual property of ti. reproduction of information in ti data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alteration is an unfair and deceptive business practice. ti is not responsible or liable for such altered documentation. resale of ti products or services with statements different from or beyond the parameters stated by ti for that product or service voids all express and any implied warranties for the associated ti product or service and is an unfair and deceptive business practice. ti is not responsible or liable for any such statements. ti products are not authorized for use in safety-critical applications (such as life support) where a failure of the ti product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of ti products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by ti. further, buyers must fully indemnify ti and its representatives against any damages arising out of the use of ti products in such safety-critical applications. ti products are neither designed nor intended for use in military/aerospace applications or environments unless the ti products are specifically designated by ti as military-grade or "enhanced plastic." only products designated by ti as military-grade meet military specifications. buyers acknowledge and agree that any such use of ti products which ti has not designated as military-grade is solely at the buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ti products are neither designed nor intended for use in automotive applications or environments unless the specific ti products are designated by ti as compliant with iso/ts 16949 requirements. buyers acknowledge and agree that, if they use any non-designated products in automotive applications, ti will not be responsible for any failure to meet such requirements. following are urls where you can obtain information on other texas instruments products and application solutions: products applications amplifiers amplifier.ti.com audio www.ti.com/audio data converters dataconverter.ti.com automotive www.ti.com/automotive dsp dsp.ti.com broadband www.ti.com/broadband interface interface.ti.com digital control www.ti.com/digitalcontrol logic logic.ti.com military www.ti.com/military power mgmt power.ti.com optical networking www.ti.com/opticalnetwork microcontrollers microcontroller.ti.com security www.ti.com/security rfid www.ti-rfid.com telephony www.ti.com/telephony low power www.ti.com/lpw video & imaging www.ti.com/video wireless wireless www.ti.com/wireless mailing address: texas instruments, post office box 655303, dallas, texas 75265 copyright ? 2007, texas instruments incorporated

▲Up To Search▲

Price & Availability of TS3A24159DRCR

	To Download TS3A24159DRCR Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .