e-series surface mount mixer 10 - 1000 mhz EMRS-2D, emrsl-2d m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 speci?ations subject to change without notice. v3.00 features lo power: +7 dbm up to +1 dbm rf surface mount speci?ations @ 25? frequency range rf 10 - 1000 mhz lo 10 - 1000 mhz if dc - 1000 mhz conversion loss (db) typical maximum 20 - 500 mhz 6.8 8.0 10 - 1000 mhz 7.5 10 isolation (db) typical minimum lo to rf 10 - 100 mhz 59 40 100 - 500 mhz 40 30 500 - 1000 mhz 33 22 lo to if 10 - 100 mhz 55 30 100 - 500 mhz 40 22 500 - 1000 mhz 30 20 operating characteristics impedance 50 ohms nominal rf input for 1db compression + 1 dbm ordering information part no. packaging EMRS-2D sm-1 in tubes EMRS-2Dtr sm-1 in forward tape & reel emrsl-2d sm-24 in tubes emrsl-2dtr sm-24 in forward tape & reel absolute maximum ratings sm-1 sm-24 l l l s 0070 b, s 0556 c dimensions in ( ) are in mm. unless otherwise noted: .x = ?.04 (1.00) .xx = ?.02 (0.50) .xxx = ?.010 (0.250) dimensions in ( ) are in mm. unless otherwise noted: .x = ?.04 (1.00) .xx = ?.02 (0.50) .xxx = ?.010 (0.250) parameter absolute maximum rf power 50 mw peak if current 40 ma storage temperature -55? to 100? operating temperature -55? to 100? pin temperature (10 seconds) 260? pin con?uration (typical) function pin no. lo 1 rf 4 if 5 ground 2,3,6
|
