phone: 800-867-2717 fax: 763-531-8235 232 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options series kc switches specifications subject to change without notice. series acutator length bushing actuator see model options table see actuator option chart 01 02 * n=non-short s=shorting model no. kc example ordering number kc _ 13 _ b _ 7. 0 _ 02 _ n _ l _ s rotary switches kc specifications ratings: 350 ma @ 125 vac 150 ma @ 250 vac life expectancy: 10,000 cycles typical contact resistance: 25m initial @ 2-4 vdc, 100ma dielectric strength: 1,500 max v rms at sea level insulation resistance: 100m min. operating force: 8.6 n/cm materials housing, base, shaft: glass filled nylon contact: silver plated copper alloy gold flash over silver plate hardware: nut-zinc, nickel plated lockwasher?steel, zinc plated stop ring?brass, nickel plated how to order a=flat b=round d=slotted features & benefits 1 to 4 poles 1 to 12 positions no stop option applications/markets industrial controls test & instrumentation appliance hvac general information timing termination p=pc pin l=solder lug contact material s f * not available with #10 model.
www.e-switch.com info @ e-switch.com 233 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options actuator options model number options 01 standard *all actuators shown in pos. 1, fully ccw.. a flat (sp models) model sw. func. terms 10 12-pos.-no stops a, 1-12 11 st a, 2* 12 dt a, 1,2* 13 3 pos. a, 1-3* 14 4 pos. a, 1-4* 15 5 pos. a, 1-5* 16 6 pos. a, 1-6* 17 7 pos. a, 1-7 18 8 pos. a, 1-8 19 9 pos. a, 1-9 50 10 pos. a, 1-10 51 11 pos. a, 1-11 52 12 pos. a, 1-12 53 2 pos. -60 index a, 1,3* 54 2 pos. -90 index a, 1,4* 55 3 pos. -60 index a, 1,3,5* 56 3 pos. -90 index a, 1,4,7 57 4 pos. -60 index a,1,3,5,7 58 4 pos. -90 index a,1,4,7,10** 59 5 pos. -60 index a,1,3,5,7,9 60 6 pos. -60 index a,1,3,5,7,9,11 (dp models) model sw. func. terms 20 6-pos.-no stops a,c,1-12 21 st a, c,2,8 22 dt a,c,1,2,7,8 23 3 pos. a,c 1-3, 7-9 24 4 pos. a,c,1-4,7-10 25 5 pos. a,c,1-5, 7-11 26 6 pos. a,c,1-12 70 2 pos. 60 index a,c,1,3,7,9 71 2 pos. 90 index a,c,1,4,7,10 72 2 pos. 60 index a,c,1,3,5,7,9,11 * note: switches with p terminations (pc pins) have additional terminal no. 9 as switch support only. this terminal is not connected electrically inside switch. ** note: standard with stops all models 30 indexing unless otherwise noted. (3p models) model sw. func. terms 30 4-pos.-no stops a,b,c,1-12 31 st a,b,c,2,6,10 32 dt a,b,c,1,2,5,6,9,10 33 3 pos. a,b,c,1-3,5-7,9-11 34 4 pos. a,b,c,1-12 80 2 pos. 60 index a,b,c,1,3,5,7,9,11 81 2 pos.-90 index a,b,c,1,4,5,8,9,12 (4p models) model sw. func. terms 40 3-pos.-no stops all terms 41 st a,b,c,d,2,5,8,11 42 dt a,b,c,d,1,2,4,5,7,8,10,11 43 3 pos. all terms 91 2 pos. 60 index a,b,c,d,1,3,4,6,7,9,10,12 b round d slotted a 30.0 38.0 9.5 7.0 10.0 13.0 b 30.0 10.0 7.0 d0.0 actuator available actuator lengths (mm) bushing options panel mounting 02 metric panel mounting
phone: 800-867-2717 fax: 763-531-8235 234 tact switches navigation switches pushbutton switches toggle switches rocker switches slide switches snap-action switches dip switches keylock switches rotary switches detector switches cap options schematics and pc mounting sp 1 pole, 12 positions schematic n= (std.) non-shorting ? break before make s = shorting ? make before break note: (s) shorting contacts available only with 30 indexing 3p 3 pole, 4 positions schematic dp 2 pole, 6 position schematic 4p 4 pole, 3 positions schematic timing options termination options p pc pin l solder lug s = standard silver over copper alloy f = gold flash over silver plate over copper alloy contact material options series kc switches rotary switches
|
