View PP158_3303887.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

commercial lighting 76 thorn lighting fluorescent battens & systems 1 : 2 popular range battens materials/finish batten: rolled steel section in precoated high reflectivity white paint lampholder assembly: tough white polycarbonate installation/mounting four-way terminal block with capacity for 1 x 4mm 2 or 2 x 2.5mm 2 cables. spare terminal for switch line connection. terminal angled for easy wiring. ambient temperature: switchstart and vivatronic -5c to 25c high frequency electronic -15c to 25c normal, dry, indoor atmospheres. fixings via three besa piercings, one central and two at fixing centres: 600mm - 500mm; 1200/1500/1800mm - 600mm; 2400mm - 1200mm. (hf electronic versions have no central fixing.) bare battens can be mounted end-to-end (except emergency versions - recommended minimum space between luminaires 50mm) emergency fixing centres: e3PP158/e3pp170 - 600mm e3pp136/e3pp236/e3ppz136/e3pp z236/e3pp258/e3pp270 - 1110mm e3ppz158/e3ppz258/e3ppz170/e 3ppz270 - 1410mm standards designed and manufactured to comply with bs4533/en 60598 (for catagorised louvres) ip20 (ip40 conversion sleeve available) emergency versions comply with bs/en 60598 2.22. battens, spines, reflector and louvre attachments are suitable for defined escape routes, as well as open areas. all other attachments are suitable for emergency lighting in open areas single twin (lampholder narrow position) twin (lampholder wide position) battens the popular range includes single and twin battens (for surface or suspended mounting). key features l five different lengths from 600mm (2ft) to 2400mm (8ft) l shallow, discrete appearance achieved with adjustable lampholders l adjustable twin lampholder gives uniform light in low ceiling commercial environments or downward light in high industrial installations l comprehensive range of commercial and industrial attachments l surface or suspended l high frequency electronic ballast, vivatronic start and switch start gear options as standard l maintained emergency versions available l dimmable controlite versions allow 1-10v dimming down to 5% lamp power l switchlite mini-detector versions (battens) available for simple on/off presence detection swtching l sensa 2 intelligent versions (battens) for daylight and presence detection (see page 141 for functionality) l super versions with high frequency ballast and polylux xl lamp for maximum economy of operation, minimum maintenance and 5 year guarantee l clip-on cover plate and spring loaded end caps for easy installation l twist-lock lampholders for reliable electrical contact l slim spine with durable, corrosion- resistant finish l optional kit for ip40 upgrade lamp types 18w/36w/58w/ 70w/100w high efficency white t8, cap: g13 (les lamp versions available) polylux xl 835 or polylux xl 840 cap: g13 options 81 82 82 60 42 125 64 options all dimensions in mm
fluorescent battens & systems commercial lighting 77 thorn lighting 2 : 2 lamp: 2 x 1500mm 58w 26 0 100 50 150 30 60 90 30 90 120 180 120 60 cd/1000 lm t a popular range battens accessories description cat. no. ip40 kit for lampholders (pack of 4 sleeves) pp/pt ls specification to specify state: fluorescent batten fitting of slim cross- section with clip-on cover plate and adjustable end cap system as thorn popular pack batten photometric data lor: 0.94 ulor: 0.30 dlor: 0.64 lmc: a mounting: ceiling utilisation factors uf (f) reflectances room index c w f 1.0 2.0 3.0 4.0 5.0 0.8 0.6 0.2 0.61 0.78 0.85 0.89 0.92 0.5 0.56 0.73 0.82 0.86 0.89 0.3 0.48 0.67 0.76 0.81 0.85 0.7 0.6 0.2 0.57 0.73 0.80 0.84 0.86 0.5 0.53 0.69 0.77 0.81 0.84 0.3 0.46 0.63 0.72 0.77 0.80 0.5 0.6 0.2 0.51 0.65 0.71 0.74 0.76 0.5 0.48 0.62 0.69 0.72 0.75 0.3 0.42 0.57 0.64 0.69 0.72 cat no: e3ppzxl258 (narrow position) reflectance: 0.0 shr nom: 2.5 mf: 0.90 2m escape route min illum mounting max spacing (m) (lux) height (m) center to end between centers trans 2 5.95 14.70 0.2 trans 3 6.80 17.20 trans 4 7.20 18.90 trans 2 4.25 10.30 0.2 axial 3 5.05 12.40 trans 4 5.60 13.90 open area min mounting max spacing (m) illum height center to end between centers (lux) (m) transverse axial transverse axial 2 8.40 7.85 22.90 16.70 0.025 3 10.60 8.50 26.10 21.70 4 11.85 9.70 26.50 25.50 emergency factor room index 1 2 3 4 5 ef 0.02 0.02 0.03 0.03 0.03 cat no: pp258 (narrow position) ordering guide supplied complete with lamps, unless otherwise stated. to order a complete luminaire quote required batten and corresponding attachment catalogue number(s). emergency version lamp type weight cat. no. weight cat. no. & rating (kg) (kg) super pack 1200mm 1 x 36w 1.90 ppzxl136? 2.75 e3 ppzxl136? 1200mm 2 x 36w 2.10 ppzxl236? 2.95 e3 ppzxl236? 1500mm 1 x 58w 2.05 ppzxl158? 3.05 e3 ppzxl158? 1500mm 2 x 58w 2.25 ppzxl258? 3.30 e3 ppzxl258? 1800mm 1 x 70w 2.30 ppzxl170? 3.45 e3 ppzxl170? 1800mm 2 x 70w 2.50 ppzxl270? 3.65 e3 ppzxl270? high frequency electronic ballast 1200mm 1 x 36w 1.90 ppz136* 1200mm 2 x 36w 2.10 ppz236* 1500mm 1 x 58w 2.05 ppz158* 1500mm 2 x 58w 2.25 ppz258* 1800mm 1 x 70w 2.30 ppz170* 1800mm 2 x 70w 2.50 ppz270* vivatronic start 1200mm 1 x 36w 2.60 ppv136 1200mm 2 x 36w 4.10 ppv236 1500mm 1 x 58w 3.40 ppv158 1500mm 2 x 58w 5.45 ppv258 1800mm 1 x 70w 3.70 ppv170 1800mm 2 x 70w 6.12 ppv270 switchstart 600mm 1 x 18w 1.80 pp118* 600mm 2 x 18w 2.16 pp218* 1200mm 1 x 36w 2.60 pp136* 3.45 e3 pp136 1200mm 2 x 36w 4.10 pp236* 4.85 e3 pp236 1500mm 1 x 58w 3.40 PP158* 4.40 e3 PP158 1500mm 2 x 58w 5.45 pp258* 6.25 e3 pp258 1800mm 1 x 70w 3.70 pp170* 4.85 e3 pp170 1800mm 2 x 70w 6.12 pp270* 7.25 e3 pp270 2400mm 1 x 100w 5.23 pp1100* 2400mm 2 x 100w 7.95 pp2100* switchlite mini-detector versions ? 1200mm 1 x 36w slmdppz136 1200mm 2 x 36w slmdppz236 1500mm 1 x 58w slmdppz158 1500mm 2 x 58w slmdppz258 1800mm 1 x 70w slmdppz170 1800mm 2 x 70w slmdppz270 controlite versions (lamps to be ordered separately) 1200mm 1 x 36w 2.10 pp136cl 2.95 e3pp136cl 1200mm 2 x 36w 2.30 pp236cl 3.15 e3pp236cl 1500mm 1 x 58w 2.35 PP158cl 3.35 e3PP158cl 1500mm 2 x 58w 2.55 pp258cl 3.55 e3pp258cl sensa 2 versions (lamps to be ordered separately) 1200mm 1 x 36w 2.20 iqmf pp 136 3.75 iqmf e3pp 136# 1200mm 2 x 36w 2.40 iqmf pp 236 3.95 iqmf e3pp 236# 1500mm 1 x 58w 2.40 iqmf pp 158 4.10 iqmf e3pp 158# 1500mm 2 x 58w 2.60 iqmf pp 258 4.30 iqmf e3pp 258# * less lamp versions are available. to order add suffix ll to the cat.no. # supplied with plug-in battery box. ? standard with polylux xl835 lamp - to specify polylux xl840 lamps add suffix /840 to cat. no. l emergency on request.
fluorescent battens & systems commercial lighting 78 thorn lighting 1 : 2 popular range trunking spines single spine (on shallow trunking) twin (lampholder narrow position) spine (on shallow trunking) 61 102 61 127 102 82 127 82 110 126 85 126 lamp types 18w/36w/58w/ 70w/100w high efficency white t8, cap: g13 (les lamp versions available) polylux xl 835 or polylux xl 840 cap: g13 installation/mounting trunking system: 3 or 5 pole terminal system with push wire connections for up to 2.5mm 2 cable ambient temperature: switchstart -5c to 25c. high frequency electronic -15c to 25c normal, dry, indoor atmospheres fixings via steel turnbuckles hold spines on to popular trunking electrical connection is made when spine engages into trunking standards designed and manufactured to comply with bs4533/en 60 598 (for categorised louvres) ip20 (ip40 conversion sleeve available) emergency versions comply with bs/en 605982.22. battens, spines, reflector and louvre attachments are suitable for defined escape routes, as well as open areas. all other attachments are suitable for emergency lighting in open areas specification to specify state: fluorescent spine for attachment on to popular trunking with metal turn buckles and adjustable end cap system. as thorn popular trunking spine. key features l five different lengths from 600mm (2ft) to 2400mm (8ft) l shallow, discrete appearance achieved with adjustable lampholders l adjustable twin lampholder gives uniform light in low ceiling commercial environments or downward light in high industrial installations l comprehensive range of commercial and industrial attachments l high frequency electronic ballast and switch start gear options as standard l maintained emergency versions available l super versions with high frequency ballast and polylux xl lamp for maximum economy of operation, minimum maintenance and 5 year guarantee l twist-lock lampholders for reliable electrical contact l slim spine with durable, corrosion- resistant finish l optional kit for ip40 upgrade spines the popular range includes single and twin trunking spines for mounting on to popular trunking. options twin (lampholder wide position) spine (on shallow trunking) single shallow trunking deep trunking shallow trunking deep trunking shallow trunking deep trunking twin (lampholder narrow position) twin (lampholder wide position) all dimensions in mm
fluorescent battens & systems commercial lighting 79 thorn lighting 2 : 2 popular range trunking spines ordering guide supplied complete with lamps, unless otherwise stated. to order a complete luminaire quote requires spine and corresponding attachment cat. no. lamp type weight cat. no. emergency version & rating (kg) weight (kg) cat. no. super spine 1200mm 1 x 36w 1.90 ptzxl136? 3.60 e3 ptzxl136#? 1200mm 2 x 36w 2.10 ptzxl236? 3.80 e3 ptzxl236#? 1500mm 1 x 58w 2.05 ptzxl158? 3.05 e3 ptzxl158? 1500mm 2 x 58w 2.25 ptzxl258? 3.25 e3 ptzxl258? 1800mm 1 x 70w 2.30 ptzxl170? 3.30 e3 ptzxl170? 1800mm 2 x 70w 2.50 ptzxl270? 3.50 e3 ptzxl270? high frequency electronic ballast 1200mm 1 x 36w 1.90 ptz136* 1200mm 2 x 36w 2.10 ptz236* 1500mm 1 x 58w 2.05 ptz158* 1500mm 2 x 58w 2.25 ptz258* 1800mm 1 x 70w 2.30 ptz170* 1800mm 2 x 70w 2.50 ptz270* switchstart 1200mm 1 x 36w 2.60 pt136* 3.95 e3 pt136# 1200mm 2 x 36w 4.10 pt236* 5.45 e3 pt236# 1500mm 1 x 58w 3.40 pt158* 4.40 e3 pt158 1500mm 2 x 58w 5.45 pt258* 6.80 e3 pt258# 1800mm 1 x 70w 3.70 pt170* 4.85 e3 pt170 1800mm 2 x 70w 6.12 pt270* 7.45 e3 pt270# * less lamp versions are available. to order add suffix ll to the cat. no. # supplied with plug-in battery box. ? supplied with polylux xl835 lamp. accessories description cat. no. ip40 kit for lampholders (pack of 4 sleeves) pp/pt ls photometric data lor: 0.96 ulor: 0.38 dlor: 0.58 lmc: a mounting: ceiling utilisation factors uf (f) reflectances room index c w f 1.0 2.0 3.0 4.0 5.0 0.8 0.6 0.2 0.60 0.77 0.84 0.88 0.91 0.5 0.54 0.72 0.81 0.85 0.89 0.3 0.46 0.65 0.74 0.80 0.84 0.7 0.6 0.2 0.56 0.71 0.78 0.82 0.85 0.5 0.51 0.68 0.75 0.80 0.83 0.3 0.44 0.61 0.70 0.75 0.79 0.5 0.6 0.2 0.48 0.62 0.68 0.71 0.73 0.5 0.45 0.59 0.65 0.69 0.72 0.3 0.39 0.54 0.61 0.66 0.69 cat no: e3ppzxl258 ( wide position) reflectance: 0.0 shr nom: 2.5 mf: 0.90 2m escape route min illum mounting max spacing (m) (lux) height (m) center to end between centers trans 2 6.15 15.70 0.2 trans 3 6.80 17.70 trans 4 7.10 19.00 trans 2 3.95 9.50 0.2 axial 3 4.65 11.50 trans 4 5.51 12.90 open area min mounting max spacing (m) illum height center to end between centers (lux) (m) transverse axial transverse axial 2 10.75 6.50 26.50 14.30 0.025 3 11.80 8.60 30.90 19.90 4 13.15 9.90 32.30 22.20 emergency factor room index 1 2 3 4 5 ef 0.01 0.02 0.02 0.02 0.03 cd/1000 lm 0 50 100 100 150 30 60 90 30 90 120 120 60 cd/1000 lm t a a cat no: pp258 (wide position) lamp: 2 x 1500mm 58w 26?
fluorescent battens & systems commercial lighting 80 thorn lighting 1 : 1 popular trunking 35 61.4 60 61.4 shallow trunking cable factor: 380 weight: 1kg/m deep trunking cable factor: 720 weight: 1.5kg/m ordering guide description cat. no. shallow 4.5m white with coupler (ptc1 s) pt 4500 s deep 4.5m white with coupler (ptc1 d) pt 4500 d accessories description cat. no. straight coupler for shallow trunking ptc1 s straight coupler for deep trunking ptc1 d two way coupler for shallow trunking with cover ptc2 s two way coupler for deep trunking with cover ptc2 d three way coupler for shallow trunking with cover ptc3 s three way coupler for deep trunking with cover ptc3 d four way coupler for shallow trunking with cover ptc4 s four way coupler for deep trunking with cover ptc4 d end cap for shallow trunking ptec s end cap for deep trunking ptec d suspension - close ceiling pts cc suspension for rod 10mm dia pts r suspension for conduit 20mm dia pts c 20 suspension for conduit 16mm dia pts c 16 suspension with 3m long wire and ceiling fixing pts w t bolt - 20mm dia (not required for pt spines) ptt t cover fillet white pvc 1.8m long pt 1800 cf cable retainer for shallow trunking (pack of 10) ptcr s cable retainer for deep trunking (pack of 10) ptcr d terminal socket 3 pole (pack of 2) for 2.5mm2 max. cable pttb 3 terminal socket 5 pole (pack of 2) for 2.5mm2 max. cable pttb 5 terminal socket kit - 3 pole with mains terminal 6mm2 max ptltb 3 wiring looms 6 way 1250 ctrs 3 core 7.5m long pt wl 6/125/3 6 way 1550 ctrs 3 core 9.3m long pt wl 6/155/3 6 way 1850 ctrs 3 core 11.1m long pt wl 6/185/3 6 way 2150 ctrs 3 core 12.9m long pt wl 6/215/3 6 way 2450 ctrs 3 core 14.7m long pt wl 6/245/3 6 way 2750 ctrs 3 core 16.5m long pt wl 6/275/3 6 way 1250 ctrs 5 core 7.5m long pt wl 6/125/5 6 way 1550 ctrs 5 core 9.3m long pt wl 6/155/5 6 way 1850 ctrs 5 core 11.1m long pt wl 6/185/5 6 way 2150 ctrs 5 core 12.9m long pt wl 6/215/5 6 way 2450 ctrs 5 core 14.7m long pt wl 6/245/5 6 way 2750 ctrs 5 core 16.5m long pt wl 6/275/5 trunking popular trunking suitable for use with spines from the popular range. key features l shallow and deep trunking, white painted for a more aesthetic appearance l instant electrical contact when spine is locked on to trunking terminal socket l metal locking turnbuckles twist to attach spines to trunking materials/finish trunking couplers: zinc coated steel with white enamel covers trunking suspensions: zinc coated steel. trunking end caps: white enamel steel trunking cover fillet: white pvc trunking: rolled section steel, white enamel finish wiring looms: cables 2.5mm 2 lsf insulated installation/mounting cable (mm 2 ) factor 1.5 solid 7.1 1.5 stranded 8.1 2.5 solid 10.2 2.5 stranded 11.4 4.0 stranded 15.2 6.0 stranded 22.9 10.0 stranded 36.3 recommended trunking suspension centres close ceiling or wire suspension 2m rod or conduit suspension 3m specification to specify state: shallow/deep white finish trunking system as thorn popular trunking accessories ptc1 s ptc1 d ptc2 s ptc2 d ptc3 s ptc3 d ptc4 s ptc4 d ptec s ptec d pts cc pts r pts c 20 pt 1800 cf ptcr s pttb3/pttb5 ptcr d ptscc ptc35 ptc45 ptc15 ptcs2 all dimensions in mm
commercial lighting 81 thorn lighting 1:1 economy diffusers economy opal or prismatic diffusers for use with popular battens and spines. key features l for cost conscious schemes l suitable for use with battens and spines materials/finish uv stabilised styrene with white abs end caps ordering guide description opal diffuser prismatic diffuser cat. no. cat. no. economy diffuser for 1 x 36w batten or spine ppd 4 ppc 4 economy diffuser for 1 x 58w batten or spine ppd 5 ppc 5 economy diffuser for 1 x 70w batten or spine ppd 6 ppc 6 economy diffuser for 1 x 100w batten ppd 8 ppc 8 economy diffuser for 2 x 18w batten ppd 22 ppc 22 economy diffuser for 2 x 36w batten or spine ppd 24 ppc 24 economy diffuser for 2 x 58w batten or spine ppd 25 ppc 25 economy diffuser for 2 x 70w batten or spine ppd 26 ppc 26 economy diffuser for 2 x 100w batten ppd 28 ppc 28 specification to specify state: economy diffuser: diffuser in extruded opal polystyrene with external reeding/prismatic controller in clear extruded polystyrene with finely embossed prismatic pattern in base. as thorn popular range economy diffuser (ppd/ppc) option 68 93 196 68 110 77 195 118 78 131 195 143 78 156 twin economy prismatic diffuser single economy opal diffuser single economy diffuser twin economy diffuser batten batten shallow trunking shallow trunking deep trunking deep trunking all dimensions in mm fluorescent battens & systems
fluorescent battens & systems commercial lighting 82 thorn lighting 1 : 1 economy reflectors narrow economy reflector (on trunking spine and shallow trunking) wide economy reflector with wire guard (on batten) key features l for use with popular battens and spines l for cost conscious schemes l narrow reflector for lowest cost with single or twin battens or spines 36w - 70w and single 100w batten l wide reflector for highest light output with single or twin battens 36w - 100w and single or twin spines 36w - 70w l wire guard available for added protection l continuous end to end mounting possible (except emergency versions and wire guard) materials/finish economy reflector: rolled steel section in precoated high reflectivity white paint. wire guards: bright zinc plated steel. ordering guide description optional wire guard for batten for spine for batten and spine cat. no. cat. no. cat. no. economy reflector - narrow - for 1 and 2 x 36w ppre 4 ptre 4 pp/pt ge 4 economy reflector - narrow - for 1 and 2 x 58w ppre 5 ptre 5 pp/pt ge 5 economy reflector - narrow - for 1 and 2 x 70w ppre 6 ptre 6 pp/pt ge 6 economy reflector - narrow - for 1 x 100w ppre 8 pp/pt ge 8 economy reflector - wide - for 1 and 2 x 36w ppre 24 ptre 24 pp/pt ge 24 economy reflector - wide - for 1 and 2 x 58w ppre 25 ptre 25 pp/pt ge 25 economy reflector - wide - for 1 and 2 x 70w ppre 26 ptre 26 pp/pt ge 26 economy reflector - wide - for 1 and 2 x 100w ppre 28 pp/pt ge 28 specification to specify state: open-ended, trough reflector in white stove enamelled steel with optional wire guard (pp/pt ge). as thorn popular range metal reflector (ppre/ptre) for use with popular range battens or spines. 121 92 121 140 121 115 121 92.5 92.5 167.5 51 167.5 51 115 167.5 140 51 121 115 121 140 narrow reflector batten shallow trunking deep trunking narrow reflector (lampholder narrow position) batten shallow trunking deep trunking wide reflector (lampholder wide position) batten shallow trunking deep trunking commercial and industrial applications: economy reflectors rack lighting reflector asymmetrical metal reflector asymmetric reflector rack reflector economy reflector wire guard trunking and spine (twin) or batten (twin) batten (single) or trunking and spine (single) economy reflectors in wide and narrow sizes for use with popular battens and spines. all dimensions in mm
fluorescent battens & systems commercial lighting 83 thorn lighting 1 : 1 asymmetric and rack reflectors 249 287 322 197 110 133 120 156 120 181 79 133 88 156 88 181 287 199 322 149 224 287 322 172 asymmetrical metal reflector for use with popular battens or spines where wall washing light is required. key features l gives directional lighting with unpierced reflector to avoid bright spots l twin batten offers alternative lumen distribution with adjustable lampholder ordering guide description for batten for spine cat. no. cat. no. asymmetrical reflector for 1 & 2 x 36w ppa 4 pta 4 asymmetrical reflector for 1 & 2 x 58w ppa 5 pta 5 asymmetrical reflector for 1 & 2 x 70w ppa 6 pta 6 asymmetrical reflector for 1 x 100w ppa 8 specification to specify state: single side angled reflector in white stove enamelled steel for single and twin tube battens as thorn popular range angled metal reflector (ppa/pta) rack lighting reflector for use with popular battens and spines where vertical illumination is required in rack lights. key features l gives glare free vertical illumination l controlled distribution avoids waste light l choice of single lamp version for narrow aisle racking or twin for work areas or storage with medium/low racking l continuous end to end mounting possible (except emergency versions) ordering guide description for batten for spine cat. no. cat. no. rack reflector for 1 x 58w pprl 5 ptrl 5 rack reflector for 1 x 70w pprl 6 ptrl 6 rack reflector for 2 x 58w pprl 25 ptrl 25 rack reflector for 2 x 70w pprl 26 ptrl 26 specification to specify state: special formed rack lighting reflector in high reflectivity polished aluminium as thorn popular range rack lighting reflector (pprl/ptrl) rack lighting single batten shallow trunking deep trunking asymmetrical metal reflector single batten shallow trunking deep trunking rack lighting twin batten shallow trunking deep trunking asymmetrical metal reflector twin batten shallow trunking deep trunking all dimensions in mm
fluorescent battens & systems commercial lighting 84 thorn lighting 1 : 2 key features l choice of pure downlight or combined uplight versions l suited to industrial and commercial applications l can be used on their own or with various louvre or diffuser inserts l wire guard available for added protection to up/downlight reflector (wire guard cannot be used with louvre or diffuser inserts) materials/finish system reflector: high reflectivity white stoved enamel steel wire guards: bright zinc plated steel reflectors for use with popular battens and spines. flexible system for both industrial and commercial applications. popular range system reflectors 154 124 251 107 146 154 251 129 171 154 251 154 narrow batten shallow trunking deep trunking wide batten shallow trunking deep trunking downlight system reflector (on trunking spine and deep trunking) combined up/downlight system reflector(on batten) option all dimensions in mm
commercial lighting 85 thorn lighting 2 : 2 ordering guide description downlight downlight up/downlight up/downlight for batten for spine for batten for spine cat. no. cat. no. cat. no. cat. no. narrow system reflector pprs 4 ptrs 4 pprs 4 ul ptrs 4 ul narrow system reflector pprs 5 ptrs 5 pprs 5 ul ptrs 5 ul narrow system reflector pprs 6 ptrs 6 pprs 6 ul ptrs 6 ul wide system reflector pprs 24 ptrs 24 pprs 24 ul ptrs 24 ul wide system reflector pprs 25 ptrs 25 pprs 25 ul ptrs 25 ul wide system reflector pprs 26 ptrs 26 pprs 26 ul ptrs 26 ul accessories description cat. no. wire guard for narrow system reflector up/downlight pp/pt gs 4 wire guard for narrow system reflector up/downlight pp/pt gs 5 wire guard for narrow system reflector up/downlight pp/pt gs 6 wire guard for wide system reflector up/downlight pp/pt gs 24 wire guard for wide system reflector up/downlight pp/pt gs 25 wire guard for wide system reflector up/downlight pp/pt gs 26 see page 20 for range of optical inserts for use with system reflectors. specification to specify state: down/up/downlight reflector to fit popular range spines or battens, with optional wire guard (pp/pt gs) and to carry louvre or diffuser inserts. as thorn popular range system reflector popular range system reflectors system reflectors and inserts economy diffuser system reflector downlight system reflector up/downlight vdt louvre insert louvre insert diffuser insert wire guard trunking and spine (twin) or batten (twin) batten (single) or trunking and spine (single) fluorescent battens & systems
fluorescent battens & systems commercial lighting 86 thorn lighting 1 : 2 optical inserts key features l white cross vane louvre to break up linear appearance in large, general use areas l category 2 and 3 louvre in mirrorbrite or satinbrite for computer use compliance l opal diffuser, for general light distribution prismatic diffuser for uniform general illuminance materials/finish white louvre inserts: white stoved enamel steel with white abs end caps categorised louvre inserts: coil brightened and anodised high purity aluminium with mirrorbrite or satinbrite finish, with white abs end caps diffuser inserts: vacuum formed uv stabilised styrene with white abs end caps system reflector inserts optical inserts to be used in conjunction with popular range system reflectors for commercial applications. wide system reflector with white cross vane insert narrow system reflector with lg3 cat2 louvre insert wide system reflector with prismatic insert wide system reflector with opal insert options specification to specify state: system reflector inserts: white cross vane/lg3 cat 3/cat 2 mirrorbrite/satinbrite louvre insert or opal/prismatic diffuser insert to fit popular system reflector as thorn popular range system reflector inserts
fluorescent battens & systems commercial lighting 87 thorn lighting 2 : 2 ordering guide description lg3 cat2 lg3 cat2 mirrorbrite insert satinbrite insert cat. no. cat. no. cat 2 insert louvre for use with system reflector for narrow system reflector pp/pt l4cat2 mb pp/pt l4cat2 sb for narrow system reflector pp/pt l5cat2 mb pp/pt l5cat2 sb for narrow system reflector pp/pt l6cat2 mb pp/pt l6cat2 sb for wide system reflector pp/pt l24cat2 mb pp/pt l24cat2 sb for wide system reflector pp/pt l25cat2 mb pp/pt l25cat2 sb for wide system reflector pp/pt l26cat2 mb pp/pt l26cat2 sb description lg3 cat3 lg3 cat3 mirrorbrite insert satinbrite insert cat. no. cat. no. cat 3 insert louvre for use with system reflector for narrow system reflector pp/pt l4cat3 mb pp/pt l4cat3 sb for narrow system reflector pp/pt l5cat3 mb pp/pt l5cat3 sb for narrow system reflector pp/pt l6cat3 mb pp/pt l6cat3 sb for wide system reflector pp/pt l24cat3 mb pp/pt l24cat3 sb for wide system reflector pp/pt l25cat3 mb pp/pt l25cat3 sb for wide system reflector pp/pt l26cat3 mb pp/pt l26cat3 sb description white cross vane opal diffuser insert prismatic diffuser insert insert cat. no. cat. no. cat. no. insert louvre or diffuser for use with system reflector for narrow system reflector pp/pt 4w pp/pt od4 pp/pt pd4 for narrow system reflector pp/pt 5w pp/pt od5 pp/pt pd5 for narrow system reflector pp/pt 6w pp/pt od6 pp/pt pd6 for wide system reflector pp/pt 24w pp/pt od24 pp/pt pd24 for wide system reflector pp/pt 25w pp/pt od25 pp/pt pd25 for wide system reflector pp/pt 26w pp/pt od26 pp/pt pd26 see page 18 for system reflectors for use with these optical units. batten narrow shallow trunking deep trunking batten wide shallow trunking deep trunking system reflector with opal/prismatic insert batten narrow shallow trunking deep trunking batten wide shallow trunking deep trunking system reflector with categorised lg3 insert system reflector with cross vane insert optical inserts for single lamp battens or spines for twin lamp battens or spines for single or twin lamp battens or spines 158 126 158 138 256 122 158 138 256 121 160 158 256 143 185 158 256 168 256 144 256 169 256 109 148 158 256 131 173 158 256 156 160 158 185 158 batten narrow shallow trunking deep trunking batten wide shallow trunking deep trunking for single lamp battens or spines for twin lamp battens or spines photometric data lor: 0.57 dlor: 0.57 lmc: c shr max: 1.57 utilisation factors uf (f) reflectances room index c w f 1.0 2.0 3.0 4.0 5.0 0.8 0.6 0.2 0.53 0.60 0.63 0.64 0.65 0.5 0.51 0.59 0.62 0.63 0.64 0.3 0.48 0.57 0.60 0.62 0.63 0.7 0.6 0.2 0.52 0.59 0.61 0.63 0.63 0.5 0.51 0.58 0.61 0.62 0.63 0.3 0.48 0.56 0.59 0.61 0.62 0.5 0.6 0.2 0.51 0.57 0.59 0.60 0.61 0.5 0.50 0.56 0.59 0.60 0.60 0.3 0.47 0.55 0.57 0.59 0.60 cat no: e3ptzxl258 reflectance: 0.0 shr nom: 2.5 mf: 0.90 2m escape route min illum mounting max spacing (m) (lux) height (m) center to end between centers trans 2 2.50 5.40 0.2 trans 3 3.40 7.40 trans 4 4.25 9.20 trans 2 3.25 6.70 0.2 axial 3 4.50 9.70 trans 4 5.55 12.20 open area min mounting max spacing (m) illum height center to end between centers (lux) (m) transverse axial transverse axial 2 2.35 3.40 5.40 7.50 0.025 3 3.45 4.50 7.70 9.90 4 4.35 5.35 9.70 11.80 emergency factor room index 1 2 3 4 5 ef 0.03 0.03 0.03 0.03 0.03 300 150 90 30 0 30 60 60 90 cd/1000 lm a t cat no: ptzxl258+ptrs 25+pp/ptl 25cat2mb lamp: 2 x 1500mm 58w 26? all dimensions in mm all dimensions in mm
fluorescent battens & systems commercial lighting 88 thorn lighting 1 : 2 architectural up/downlight attachments 300 158 300 183 300 158 300 136 300 144 300 183 key features architectural uplight attachment l can be used in vdt areas architectural up/downlight attachment l central louvre gives lg3 category 2 compliance l visual interest given with perforated baffles architectural wing attachment l for use with architectural up or up/downlight attachment l gives indirect reflection of upward component of light l especially useful in suspended installations with high ceilings (not suitable for ceiling mounted battens) batten cover l required to enclose batten when wing reflector is not used (not required for trunking spines) materials/finish architectural attachments: stoved enamel white low gloss ral 9010 perforated sheet steel with abs end caps architectural attachments batten cover and wing reflector: sheet steel with white stoved enamel finish louvre: high purity aluminium, coil brightened, low iridescent texturebrite finish options architectural uplight architectural up/downlight with wing reflector decorative up/downlight attachments for use with popular battens and spines, combining architectural lighting effects with vdt area requirements. uplight & up/downlight batten shallow trunking deep trunking uplight & up/downlight with wing reflector batten shallow trunking deep trunking architectural up/downlight all dimensions in mm
commercial lighting 89 thorn lighting 2 : 2 architectural up/downlight attachments ordering guide description for batten for spine cat. no. cat. no. architectural uplight attachment for 1 and 2 x 36w pp ul4 pt ul4 architectural uplight attachment for 1 and 2 x 58w pp ul5 pt ul5 architectural uplight attachment for 1 and 2 x 70w pp ul6 pt ul6 architectural up/downlight attachment for 1 and 2 x 36w pp dil4 pt dil4 architectural up/downlight attachment for 1 and 2 x 58w pp dil5 pt dil5 architectural up/downlight attachment for 1 and 2 x 70w pp dil6 pt dil6 architectural wing reflector for 1 and 2 x 36w ppw4 ptw4 architectural wing reflector for 1 and 2 x 58w ppw5 ptw5 architectural wing reflector for 1 and 2 x 70w ppw6 ptw6 batten cover for 1 and 2 x 36w ppbc 4* batten cover for 1 and 2 x 58w ppbc 5* batten cover for 1 and 2 x 70w ppbc 6* * required only when wing reflector is not used and only required for battens not spines. specification to specify state: architectural uplight: uplight to fit popular batten spine, shallow curved white stove enamelled steel with optional gull wing reflector. as thorn popular range architectural uplight (pp/pt ul) architectural up/downlight: up/downlight to fit popular batten/spine, shallow perforated white stove enamelled steel with central, texturebrite louvre, with optional gull wing reflector. as thorn popular range architectural up/downlight (pp/pt dil + ppw/ppbc) architectural applications: downlight attachments photometric data lor: 0.62 ulor: 0.13 dlor: 0.49 lmc: f shr max: 1.54 utilisation factors uf (f) reflectances room index c w f 1.0 2.0 3.0 4.0 5.0 0.8 0.6 0.2 0.48 0.58 0.62 0.64 0.65 0.5 0.45 0.56 0.60 0.62 0.64 0.3 0.41 0.52 0.57 0.60 0.62 0.7 0.6 0.2 0.46 0.56 0.59 0.61 0.62 0.5 0.44 0.54 0.58 0.60 0.61 0.3 0.40 0.51 0.55 0.58 0.59 0.5 0.6 0.2 0.43 0.51 0.54 0.56 0.57 0.5 0.41 0.50 0.53 0.55 0.56 0.3 0.38 0.47 0.51 0.53 0.55 cat. no: e3ptzxl258 reflectance: 0.0 shr nom: 2.5 mf: 0.90 2m escape route min illum mounting max spacing (m) (lux) height (m) center to end between centers trans 2 3.50 8.50 0.2 trans 3 4.50 10.20 trans 4 5.35 12.30 trans 2 3.05 6.60 0.2 axial 3 4.10 9.00 trans 4 5.00 11.10 open area min mounting max spacing (m) illum height center to end between centers (lux) (m) transverse axial transverse axial 2 5.35 4.70 16.80 8.40 0.025 3 6.85 4.60 17.90 11.30 4 5.00 6.00 16.00 14.10 emergency factor room index 1 2 3 4 5 ef 0.02 0.02 0.02 0.02 0.02 300 150 90 30 0 30 60 60 90 cd/1000 lm a t cat no: ftzxl258+pp/pt dil5+pt/w5 lamp: 2 x 1500mm 58w 26? trunking and spine (twin) or batten (twin) batten (single) or trunking and spine (single) wing refelctor batten cover architectural up/downlight architectural uplight perflite fluorescent battens & systems
fluorescent battens & systems commercial lighting 90 thorn lighting 1 : 1 popular range perflite key features l suitable for use with battens and spines l diffused up and downlighting l simulates the appearance of micro-perforated metal l easy to clean and maintain materials/finish diffuser: uv stabilised extruded white opal plastic with external micro-perforated effect end caps: white abs ordering guide description cat. no. perflite diffuser for 1 x 36w batten or spine pp/pt pfd 4 perflite diffuser for 1 x 58w batten or spine pp/pt pfd 5 perflite diffuser for 1 x 70w batten or spine pp/pt pfd 6 perflite diffuser for 2 x 36w batten or spine pp/pt pfd 24 perflite diffuser for 2 x 58w batten or spine pp/pt pfd 25 perflite diffuser for 2 x 70w batten or spine pp/pt pfd 26 specification to specify state: perforated effect opal diffuser as thorn popular range perflite diffuser (pp/pt pfd) a unique diffuser attachment which combines the fashionable effect of micro-perforations with the even diffusion of opal plastic. the profile of the perflite diffuser echoes the shape of the popular range architectural attachments to enable co-ordinated scheme design. batten 101 200 200 123 200 148 shallow trunking deep trunking all dimensions in mm

▲Up To Search▲

Price & Availability of PP158

	To Download PP158 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .