View CLC420BJ-QML_3326852.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

original creation date: 04/07/98 last update date: 08/02/01 last major revision date: 07/18/01 mnclc420b-x rev 3a0 microcircuit data sheet high speed, voltage feedback operational amplifier general description the clc420b is an operational amplifier designed for applications requiring matched inputs and integration or transimpedance amplification. utilizing voltage feedback architecture, the clc420b offers a 300mhz bandwidth, a 1100v/us slew rate and a 4ma supply current (power consumption of 40mw, +5v supplies). additional benefits of the clc420b are a 0.5mv input offset voltage and a 4uv/c temperature coefficient. applications such as differential amplifiers will benefit from 70db common mode rejection ratio and an input offset current of 0.2ua(typ). with its unity-gain stability, 2pa/sqrthz current noise(typ), combined with a settling time of 18ns to 0.01% make the clc420b ideal for d/a converters, pin diode receivers and photo multiplier amplifiers. all applications will find 70db power supply rejection ratio attractive. ns part numbers clc420be-qml CLC420BJ-QML industry part number clc420b prime die ub1366a controlling document see features section processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 2 static tests at +125 3 static tests at -55 4 dynamic tests at +25 5 dynamic tests at +125 6 dynamic tests at -55 7 functional tests at +25 8a functional tests at +125 8b functional tests at -55 9 switching tests at +25 10 switching tests at +125 11 switching tests at -55 1
microcircuit data sheet mnclc420b-x rev 3a0 features - 300mhz small signal bandwidth - 1100v/us slew rate - unity-gain stability - low distortion, -60dbc at 20mhz - 0.01% settling in 18ns - 0.2ua input offset current - 2pasqrthz current noise - 0.5mv input offset voltage, 4uv/c controlling documents: clc420be-qml 5962-9175802m2a CLC420BJ-QML 5962-9175802mpa applications - active filters/integrators - differential amplifiers - pin diode receivers - log amplifiers - d/a converters - photo multiplier amplifiers 2
microcircuit data sheet mnclc420b-x rev 3a0 (absolute maximum ratings) (note 1) supply voltage (v+) +7 vdc output current (iout) 70 ma common mode input voltage (vcm) v+ differential input voltage 10 v power dissipation (pd) (note 2) 112 mw thermal resistance (thetaja) junction to ambient 125 c/w ceramic dip (still air) 72 c/w (500 lfpm) 100 c/w lcc (still air) 68 c/w (500 lfpm) (thetajc) junction to case 23 c/w ceramic dip 25 c/w lcc junction temperature (tj) +175 c storage temperature range -65 c < ta < +150 c lead temperature +300 c (soldering, 10 seconds) package weight (typical) 1075 mg ceramic dip 470 mg lcc esd tolerance (note 3) 2000v esd rating note 1: absolute maximum ratings are limits beyond which damage to the device may occur. operating ratings are conditions for which the device is functional, but do not guarantee specific performance limits. for guaranteed specifications and test conditions see the electrical characteristics. the guaranteed specifications apply only for the test conditions listed. some performance characteristics may degrade when the device is not operated under the listed test conditions. note 2: the maximum power dissipation must be derated at elevated temperatures and is dictated by tjmax (maximum junction temperature), thetaja (package junction to ambient thermal resistance), and ta (ambient temperature). the maximum allowable power dissipation at any temperature is pdmax = (tjmax - ta)/thetaja or the number given in the absolute maximum ratings, whichever is lower. note 3: human body model, 100pf discharged through 1.5k ohms. 3
microcircuit data sheet mnclc420b-x rev 3a0 recommended operating conditions supply voltage (v+) +5 vdc gain range (av) +1 to +10 operating temperature range -55 c < ta < +125 c 4
mnclc420b-x rev 3a0 microcircuit data sheet electrical characteristics dc parameters: open loop characteristics (the following conditions apply to all the following parameters, unless otherwise specified.) dc: v+ = +5 vdc, av = +1, load resistance rl = 100 ohms, tested parameters use rs = 500 ohms, otherwise, feedback resistance (rf) = 0 ohms. temp. range: -55 c < ta < +125 c. (note 3) symbol parameter conditions notes pin- name min max unit sub- groups +iin input bias current (noninverting) -10 +10 ua 1, 2 -20 +20 ua 3 -iin input bias current (inverting) -10 +10 ua 1, 2 -20 +20 ua 3 vio input offset voltage -0.8 +0.8 mv 1 -1.8 +1.8 mv 2 -1.6 +1.6 mv 3 tc (+iin) average +input bias current drift 1 60 na/c 2 1 120 na/c 3 tc (-iin) average -input bias current drift 1 60 na/c 2 1 120 na/c 3 tc (vio) average input offset voltage drift 1 10 uv/c 2, 3 iio input offset current -1.0 1.0 ua 1 -2.0 2.0 ua 2 -3.0 3.0 ua 3 tc (iio) average input offset current drift 1 10 na/c 2 1 20 na/c 3 aol open loop gain 56 db 1, 2 52 db 3 icc quiescent supply current (no load) 5.0 ma 1, 2, 3 psrr power supply rejection ratio v+ = +4.5v to +5.0v, v- = -4.5v to -5.0v 60 db 1, 2 55 db 3 cmrr common mode rejection ratio vcm = +1v 65 db 1, 2 60 db 3 rind differential mode input resistance 1 1 mohm 4, 5 1 0.5 mohm 6 cind differential mode input capacitance 1 2 pf 4, 5, 6 5
mnclc420b-x rev 3a0 microcircuit data sheet electrical characteristics dc parameters: open loop characteristics (continued) (the following conditions apply to all the following parameters, unless otherwise specified.) dc: v+ = +5 vdc, av = +1, load resistance rl = 100 ohms, tested parameters use rs = 500 ohms, otherwise, feedback resistance (rf) = 0 ohms. temp. range: -55 c < ta < +125 c. (note 3) symbol parameter conditions notes pin- name min max unit sub- groups rinc common mode input resistance 1 0.5 mohm 4, 5 1 0.25 mohm 6 cinc common mode input capacitance 1 2 pf 4, 5, 6 +vcm common mode input voltage 1 +2.8 v 4, 5 1 +2.5 v 6 -vcm common mode input voltage 1 -2.8 v 4, 5 1 -2.5 v 6 +iout output current 1 +50 ma 4, 5 1 +30 ma 6 -iout output current 1 -50 ma 4, 5 1 -30 ma 6 rout output impedance at dc 1 0.2 ohm 4, 5 1 0.3 ohm 6 +vo output voltage swing no load +3 v 1, 2 +2.8 v 3 rl = 100 ohms +2.5 v 1, 2, 3 -vo output voltage swing no load -3 v 1, 2 -2.8 v 3 rl = 100 ohms -2.5 v 1, 2 -2.2 v 3 6
mnclc420b-x rev 3a0 microcircuit data sheet electrical characteristics ac parameters: frequency domain response (the following conditions apply to all the following parameters, unless otherwise specified.) ac: v+ = +5 vdc, av = +1, load resistance rl = 100 ohms, tested parameters use rs = 500 ohms, otherwise, feedback resistance (rf) = 0 ohms. temp. range: -55 c < ta < +125 c. (note 3) symbol parameter conditions notes pin- name min max unit sub- groups gfpl gain flatness peaking low at 0.1 mhz to 100 mhz, vout < 0.4 vpp 1.4 db 4 1.6 db 5 1.4 db 6 gfph gain flatness peaking high at 100 mhz, vout < 0.4 vpp 3.0 db 4 3.0 db 5 5.0 db 6 gfr gain flatness rolloff at 0.1 mhz to 100 mhz, vout < 0.4 vpp 1.0 db 4, 6 2.0 db 5 at 0.1 mhz to 30 mhz, av = -1, rf = 500 ohms, vout < 0.4 vpp 1.4 db 4 1.6 db 5 1.4 db 6 ssbw small signal bandwidth -3db bandwidth, vout < 0.4 vpp 1 200 mhz 4, 6 1 130 mhz 5 -3db bandwidth, av = -1, rf = 500 ohms, vout < 0.4 vpp 65 mhz 4 65 mhz 6 45 mhz 5 lsbw large signal bandwidth -3db bandwidth, vout < 5vpp 1 25 mhz 4 1 20 mhz 5, 6 -3db bandwidth, av = -1, rf = 500 ohms, vout < 5 vpp 1 35 mhz 4 1 30 mhz 5, 6 lpd linear phase deviation at 0.1 mhz to 100 mhz 1 1.8 deg. 4, 6 1 2.5 deg. 5 7
mnclc420b-x rev 3a0 microcircuit data sheet electrical characteristics ac parameters: distortion and noise (the following conditions apply to all the following parameters, unless otherwise specified.) ac: v+ = +5 vdc, av = +1, load resistance rl = 100 ohms, tested parameters use rs = 500 ohms, otherwise, feedback resistance (rf) = 0 ohms. temp. range: -55 c < ta < +125 c. (note 3) symbol parameter conditions notes pin- name min max unit sub- groups hd2 2nd harmonic distortion 2 vpp at 20 mhz -40 dbc 4 -40 dbc 5, 6 2 vpp at 20 mhz, av = -1 -40 dbc 4 -40 dbc 5, 6 hd3 3rd harmonic distortion 2 vpp at 20 mhz -45 dbc 4, 6 -40 dbc 5 2 vpp at 20 mhz, av = -1 -40 dbc 4 -35 dbc 5 -40 dbc 6 vn input referred noise voltage at 1 mhz to 200 mhz 1 5.3 nv/sq rthz 4, 6 1 6 nv/sq rthz 5 icn input referred noise current at 1 mhz to 200 mhz 1 2.6 pa/sq rthz 4 1 2.3 pa/sq rthz 5 1 2.9 pa/sq rthz 6 8
mnclc420b-x rev 3a0 microcircuit data sheet electrical characteristics ac parameters: time domain response (the following conditions apply to all the following parameters, unless otherwise specified.) ac: v+ = +5 vdc, av = +1, load resistance rl = 100 ohms, tested parameters use rs = 500 ohms, otherwise, feedback resistance (rf) = 0 ohms. temp. range: -55 c < ta < +125 c. (note 3) symbol parameter conditions notes pin- name min max unit sub- groups trs rise and fall time 0.4 v step, cl < 10pf, measured between 10% and 90% points 1 2 ns 9, 11 1 3 ns 10 0.4 v step, av = -1, rf = 500 ohms, cl < 10 pf, measured between 10% and 90% points 1 5.5 ns 9, 11 1 7.8 ns 10 trl rise and fall time 5 v step cl < 10 pf, measured between 10% and 90% points 1 20 ns 9, 10 125ns11 5 v step, av = -1, rf = 500 ohms, cl < 10 pf, measured between 10% and 90% points 1 9.5 ns 9 1 10 ns 10, 11 ts settling time 2v step at 0.01% of the final value, cl < 10 pf 1 25 ns 9, 10, 11 2v step at 0.1% of the final value, cl < 10 pf 1 18 ns 9, 10, 11 os overshoot 0.4 v step, cl < 10 pf 1 25 % 9, 10 135%11 +sr slew rate rising edge, measured +1 v with 5 v step, cl < 10 pf 1 750 v/us 9 1 600 v/us 10, 11 rising edge, av = -1, measured +1 v with 5 v step, rf = 500 ohms, cl = < 10 pf 1 500 v/us 9 1 430 v/us 10, 11 -sr slew rate falling edge, measured +1 v with 5 v step, cl < 10 pf 1 750 v/us 9 1 600 v/us 10, 11 falling edge, av = -1, measured +1 v with 5 v step, rf = 500 ohms, cl < 10 pf 1 500 v/us 9 1 430 v/us 10, 11 note 1: if not tested, shall be guaranteed to the limits specified. note 2: group a testing only. note 3: the algebraic convention, whereby the most negative value is a minimum and the most positive is a maximum, is used in this table. negative current shall be defined as conventional flow out of a device terminal. 9
microcircuit data sheet mnclc420b-x rev 3a0 graphics and diagrams graphics# description 07081hra3 cerdip (j), 8 lead (b/i ckt) 07086hra2 lcc (e), type c, 20 terminal (b/i ckt) e20are lcc (e), type c, 20 terminal(p/p dwg) j08arl cerdip (j), 8 lead (p/p dwg) p000430a cerdip (j), 8 lead (pinout) p000444a lcc (e), type c, 20 terminal (pinout) see attached graphics following this page. 10

n mil/aerospace operations 2900 semiconductor drive santa clara, ca 95050 1 8 2 7 3 6 4 5 clc420j 8 - lead dip top view connection diagram p000430a v inv -v cc +v cc v out n/c v non-inv n/c n/c
n mil/aerospace operations 2900 semiconductor drive santa clara, ca 95050 4 18 5 6 7 8 14 9 10 11 12 13 17 16 15 3 2 1 20 19 n/c n/c +v cc n/c v out n/c n/c n/c -v cc n/c clc420e 20 - lead lcc connection diagram top view p000444a v inv n/c n/c n/c v non-inv n/c n/c n/c n/c n/c
microcircuit data sheet mnclc420b-x rev 3a0 revision history rev ecn # rel date originator changes 0a0 m0003231 10/20/99 shaw mead initial mds release -trl typo corrected. 0b0 m0003581 05/22/00 rose malone updated missing information on main table, adding reference to 883 spec mil-std to processing and quality conformance inspection sections and note 1 in electrical section. mnclc420b-x, rev. 0a0 to mnclc420b-x, rev. 0b0 1a0 m0003705 07/11/01 rose malone update mds: mnclc420b-x, rev. 0b0 to mnclc420b-x, rev. 1a0. added min. limits to iio test and changed subgroup 3 test limit from 2.6ua to 3.0ua to improve test yields. 2a0 m0003812 08/02/01 rose malone update mds: mnclc420b-x-rh, rev. 1a0 to mnclc420b-x-rh, rev. 2a0. change to electrical section, typo in vn parameter units change from mv/hz to nv/sqrthz 3a0 m0003829 08/02/01 rose malone update mds: mnclc420b-x, rev. 2a0 to mnclc420b-x, rev. 3a0. electrical section icn parameter units column from pa/hz to pa/sqrthz. 11

▲Up To Search▲

Price & Availability of CLC420BJ-QML

	To Download CLC420BJ-QML Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .