fC1 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ittcannon.com f detect mps series magnetic proximity sensors features/benefits ? long life0m operations ? sealed contacts ? quality construction ? quick and easy installation t ypical applications ? automotive sensors and indicators ? industrial sensors ? factory automation equipment specifications contact ratings: 3.0 w max. @ 30 v dc or 30 v ac max. @ 0.3 amp max.; 1.0 msec. max. operate time (including bounce); 1.0 amp max. carry current. contact resistance: 100 m max. initial. dielectric strength: 200 v dc min. electrical circuit: spst no (contact form a). reed switch opens when magnet is removed from proximity. contacts are held closed when magnet is within actuation range. operating temperature: -40 to 212?(-4-? o 100?). opera ting dist ance/alignment : operate (pull-in or make) points are nominal values with 10% tolerance. release points are 110% to 150% of the operating points. mechanical & electrical life: 10 million operations. packaging: bulk packaging, 10 switch and magnet pairs per package. materials housing/spacer/cover: abs plastic (ul94v-0), white. reed switch: rhodium coated reed contacts in hermetically sealed, nitrogen filled glass capsule. closed when magnet is in close proximity. used in closed loop circuits. wire leads: ul 1061, 22 awg wire: stranded, made of copper or aluminum; length: 12 in. with ends stripped; color: white. potting (around wires): epoxy. magnets: alnico v (all models, except mps80wg) and ceramic ferrite 8 (mps80wg model only). adhesive mounting: foam-backed, pr essur e-sensitive adhesive with release liner (mps45wgw model only). note: for the latest information regarding rohs compliance, please go to: www .ittcannon.com/r ohs. note: specifications and materials listed above ar e for switches with standar d options. for information on specific and custom switches, consult customer service center. how t o or der complete part numbers for mps series magnetic pr oximity sensors ar e shown on pages f-22 thru f-24. offset of ce nterlines and distance between f ace s of switch and magnet (inches). act uation chart switch magnet subminiature surface mount (adhesive or flange), side exit leads, 1" make gap. mps45wgw switch type part number
fC2 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ittcannon.com f detect mps series magnetic proximity sensors offset of centerlines and distance between f ace s of switch and magnet (inches). act uation chart offset of centerlines and distance between f ace s of switch and magnet (inches). act uation chart cover switch magnet spacer switch magnet spacer standar d surface mount, scr ew terminals, 1 1/4" make gap. mps20wgw switch type part number industrial surface mount, concealed scr ew terminals, 2" make gap. mps80wgw switch type part number
fC3 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ittcannon.com f detect mps series magnetic proximity sensors switch & magnet panel mounting offset of centerlines and distance between f ace s of switch and magnet (inches). act uation chart switch magnet switch panel mounting offset of centerlines and distance between f ace s of switch and magnet (inches). act uation chart switch magnet switch panel mounting magnet panel mounting offset of centerlines and distance between f ace s of switch and magnet (inches). act uation chart switch magnet 3/8" diameter recessed magnetic contact, 1 1/4" make gap. mps9wgw switch type part number 3/8" diameter r ecessed magnetic contact, 1 1/4" make gap. mps95wgw switch type part number 3/4" diameter recessed magnetic contact, 1 1/4" make gap. MPS73WGW switch type part number
mps series magnetic proximity sensors offset of centerlines and distance between f ace s of switch and magnet (inches). act uation chart switch magnet switch & magnet panel mounting actuating positions when installing r ecessed and surface mount contacts, magnet position is very important. the switch and magnet must always be parallel orend to end, and never in a ?onfiguration. gap distance gap distance is a combination of the horizontal and vertical plane sep - aration of the switch and magnet. example: if a r ecessed magnet is 1/4" of f the centerline of the switch, the make gap is r educed by 1/4" correct configuration incorrect configuration center alignment off ce nter alignment 1 1/4" make gap 1" make gap 1/4 , 3/4" diameter recessed magnetic contact, 1 1/4" make gap. mps70wgw switch type part number f detect dimensions are shown: inches (mm) specifications and dimensions subject to change www.ittcannon.com fC4
|