vishay general semiconductor ss2p5 & ss2p6 new product document number 88943 23-jun-06 www.vishay.com 1 high-current density surface mount schottky rectifier features ? very low profile - typical height of 1.0 mm ? ideal for automated placement ? low forward voltage drop, low power losses ? high efficiency ? low thermal resistance ? meets msl level 1, per j-std-020c, lf max peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in low voltage high frequency inverters, free- wheeling, dc-to-dc converters and polarity protection applications. mechanical data case: do-220aa (smp) epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002b and jesd22-b102d e3 suffix for commercial grade, he3 suffix for high reliability grade (aec q101 qualified) polarity: color band denotes the cathode end do-220aa (smp) major ratings and characteristics i f(av) 2 a v rrm 50 v, 60 v i fsm 50 a e as 11.25 mj v f 0.54 v t j max. 150 c note: (1) pulse test: 300 s pulse width, 1 % duty cycle maximum ratings (t a = 25 c unless otherwise noted) parameter symbol ss2p5 ss2p6 unit device marking code 25 26 maximum repetive peak reverse voltage v rrm 50 60 v maximum average forward rectified current (see fig. 1) i f(av) 2.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 50 a non-repetitive avalanche energy at i as = 1.5 a, l = 10 mh, t j = 25 c e as 11.25 mj voltage rate of change (rated v r ) dv/dt 10000 v/us operating junction and storage temperature range t j, t stg - 55 to + 150 c electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ max. unit maximum instantaneous forward voltage (1) at i f = 2 a, t j = 25 c at i f = 2 a, t j = 125 c v f 0.62 0.54 0.70 0.60 v maximum reverse current at rated v r (1) t j = 25 c t j = 125 c i r - 1.6 100 10 a ma typical junction capacitance at 4.0 v, 1 mhz c j 80 pf
www.vishay.com 2 document number 88943 23-jun-06 vishay general semiconductor ss2p5 & ss2p6 note: (1) thermal resistance from junction to ambient and junction to lead mounted on p.c.b. with 5.0 x 5.0 mm copper pad areas. r jl is measured at the terminal of cathode band. r jc is measured at the top centre of the body ratings and characteristics curves (t a = 25 c unless otherwise noted) thermal characteristics (t a = 25 c unless otherwise specified) parameter symbol ss2p5 ss2p6 unit typical thermal resistance (1) r ja r jl r jc 115 15 20 c/w ordering information preferred p/n unit weight (g) preferred package code base quantity delivery mode ss2p5-e3/84a 0.024 84a 3000 7" diameter plastic tape & reel ss2p5-e3/85a 0.024 85a 10000 13" diameter plastic tape & reel figure 1. forward current derating curve figure 2. maximum non-repetitive peak forward surge current 0 0.4 0. 8 1.2 1.6 2 2.4 8 0 90 100 110 120 130 140 150 t l - lead temperat u re (c) a v erage for w ard c u rrent (a) 0 10 20 30 40 50 1 10 100 a v erage for w ard c u rrent (a) nu m b er of cycles at 60 hz figure 3. typical instantaneous forward characteristics figure 4. typical reverse leakage characteristics 0.1 1 10 100 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0. 8 0.9 1.0 1.1 1.2 instantaneo u s for w ard c u rrent (a) instantaneo u s for w ard v oltage ( v ) tj = 150 c tj = 125 c tj = 25 c 0.1 1.0 10 100 1000 10000 10 20 30 40 50 60 70 8 090 100 t j = 150 c t j = 125 c t j = 25 c instantaneo u s re v erse c u rre nt ( a) percent of rated peak re v erse v oltage ( % )
document number 88943 23-jun-06 www.vishay.com 3 ss2p5 & ss2p6 vishay general semiconductor package outline dimensions in inches (millimeters) figure 5. typical junction capacitance 10 100 1000 0.1 1 10 100 j u nction capacitance (pf) re v erse v oltage ( v ) figure 6. typical trans ient thermal impedance 1 10 100 1000 0.01 0.1 1 10 100 t - p u lse d u ration (s) transient thermal impedance (c/ w ) 0.000 (0.00) 0.012 (0.30) 0.013 (0.35) 0.004 (0.10) 0.01 8 (0.45) 0.006 (0.15) 0.045 (1.15) 0.033 (0. 8 5) 0.036 (0.91) 0.024 (0.61) 0.016 (0.40) 0.032 (0. 8 0) 0.053 (1.35) 0.041 (1.05) 0.012 (0.30) ref 0.105 (2.67) 0.025 (0.635) 0.100 (2.54) 0.030 (0.762) 0.050 (1.27) cathode b and 0.142 (3.61) 0.126 (3.19) 0.15 8 (4.00) 0.146 (3.70) 0.0 8 6 (2.1 8 ) 0.074 (1. 88 ) 0.0 8 7 (2.20) 0.103 (2.60) do-220aa (smp)
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
