150w cw twt power amplifier for emi/emc testing & communications 811 hansen way p.o. box 51625, palo alto, ca 94303 tel: +1 (650) 846-3803 fax: +1 (650) 424-1744 e-mail: marketing@satcom.cpii.com www.cpii.com/satcom plays in the rain rugged, compact and lightweight ampli? er designed for outdoor use. ef cient and cost effective mounting at the antenna improves performance through minimized cable losses and saves cost in system design. employs a high ef? ciency helix traveling wave tube, reducing operating costs. simple to operate user-friendly microprocessor-controlled logic with integrated rs422/485 computer interface. digital metering is standard. easy to maintain modular design and built-in fault diagnostic capability via remote monitor and control. the new VZK-2790J1 series 150 watt cw k-band twt power ampli er? environmentally sealed compact design for outdoor operation global applications meets international safety s tandard en -60215, electromagnetic compatibility 89/336/eec and harmonic standard en-61000-3-2 to satisfy worldwide requirements. worldwide support backed by over three decades of satellite communications experience, and cpis worldwide 24-hour customer support network that includes ? fteen regional factory service centers. 150w cw twt power amplifier k-band k-band
k-band for more detailed information, please refer to the corresponding cpi technical description. note: speci cations may change without notice as a result of additional data or product re nement. please contact cpi before using this information for system design. mkt 200, issue 1 01/07 pdf options: ? ethernet interface ? outdoor operation electrical model number VZK-2790J1 frequency 18.0 - 26.5 ghz output power twt 150 w flange 100 w, min., 125 w typ. bandwidth 8.5 ghz rf level adjust range 0 to 20 db attenuator step size 0.1 db typ. gain at rated power 50 db min. at small signal 53 db min. small signal gain variation ?.0 db pk-pk across the full bandwidth gain stability (at constant ?.25 db/24 hours max. (after 30 minute warm-up) drive and temperature) ?.0 db over temperature range vswr input 2:1 output 2:1 load 1.5:1 max.; no degradation, in nite vswr without damage phase noise iess 308 continuous mask am/pm conversion 2.5 ? /db max. for a single carrier up to 6 db below rated power (1.0 ? /db up to 3 db obo with linearizer) noise and spurious -50 dbc noise figure 10 db typ. primary power single phase, 100-240 vac ?10%, 47-63 hz power consumption 650 va typ, at saturated rf output power; 750 va max. power factor 0 .95 min. environmental (operating) ambient temperature -40 ? c to +45 ? c relative humidity 100% condensing with outdoor option, 95% non-condensing standard altitude 10,000 ft with standard adiabatic derating of 2 ? c/1000 ft shock and vibration 20 g peak estimated, truck transportation mechanical cooling forced air with integral blower rf input connection wr-42f rf output connection wr-42g rf output monitor 2.9 mm sma female dimensions (wxhxd) 10.25 x 9.5 x 20 inches (261 x 242 x 508 mm) weight 52 lbs (23.6 kg) max. heat and acoustic heat dissipation 450 w typ. acoustic 65 dba typ. specifications, k-band outdoor lpa certificate number: 30515
|
