12 www.lemo.com ? ? ~m ~l ? a s 1 s 2 jgg straight plug, short version, key (g), cable collet 9.5 32.0 22.0 8.0 7 reference model series dimensions (mm) alms1s2 jgg 0b ~m ~l ? a s 1 s 2 fgg straight plug, key (g) or keys (a?m and r), cable collet reference model series s 2 ~m ~l s 1 ? a fgg 00 1) fgg 0b fgg 1b fgg 2b fgg 3b fgg 4b fgg 5b 6.4 28.5 20.5 5.5 5 9.5 36.0 26.0 8.0 7 12.0 43.0 32.0 10.0 9 15.0 50.0 38.0 13.0 12 18.0 58.0 43.0 15.0 14 25.0 75.0 57.0 21.0 20 35.0 103.0 78.0 31.0 30 dimensions (mm) alms1s2 fgg straight plug, key (g) or keys (a?m), cable collet and nut for fitting a bend relief 2) reference model series fgg 00 1) fgg 0b fgg 1b fgg 2b fgg 3b fgg 4b 6.4 36.5 28.5 5.5 6 9.5 35.0 25.0 8.0 7 12.0 42.0 31.0 10.0 9 15.0 49.0 37.0 13.0 12 18.0 56.5 41.5 15.0 15 25.0 71.0 53.0 21.0 20 dimensions (mm) alms1s2 note: 1) the surface design of the 00 series is different. 2) to order, add a ?z? at the end of the reference. the bend relief must be ordered separately (see page 141). note: 1) the surface design of the 00 series is different. m4 cable assembly (page 161) m1 cable assembly (page 161) m1 cable assembly (page 161) technical characteristics electrical at 10 mhz at 1 ghz characteristics > 75 db iec 60169-1-3 > 40 db iec 60169-1-3 value standard shielding efficiency note: the various tests have been carried out with fgg and egg connector pairs, with chrome-plated brass shell and peek insulator. detailed electrical characteristics, as well as materials and treatment are presented in the chapter technical characteristics on page 171. > 5000 cycles iec 60512-5 test 9a up to 95% at 60 c - 55 c, +250 c 10-2000 hz, 15 g iec 60512-4 test 6d 100 g, 6 ms iec 60512-4 test 6c > 144h iec 60512-6 test 11f ip50 iec 60529 55/175/21 iec 60068-1 endurance humidity temperature range resistance to vibration shock resistance salt spray corrosion test protection index (mated) climatical category characteristics value standard mechanical and climatical metal housing models
13 www.lemo.com ? ? ~m ~l ? a s 1 s 2 ffg straight plug, non-latching, key (g) or keys (a?m), cable collet 9.5 36 26 8 7 12.0 43 32 10 9 15.0 50 38 13 12 18.0 58 43 15 14 25.0 75 57 21 20 reference model series dimensions (mm) alms1s2 ffg 0b ffg 1b ffg 2b ffg 3b ffg 4b ~m ~l ? a b s 2 s 1 n s 2 ~m ~l s 1 ? a feg straight plug, key (g) or keys (a?l), cable collet, front seal and nut for fitting a bend relief 1) (ip 54 protection index when mated) fng straight plug, key (g) or keys (a?m and r), cable collet and lanyard release 9.5 15.5 36.0 26.0 140 8 7 12.0 18.0 43.0 32.0 140 10 9 15.0 21.0 49.0 37.0 160 13 12 18.0 25.0 58.0 43.0 190 15 14 25.0 35.2 75.0 57.0 230 21 20 35.0 47.0 103.0 78.0 300 31 30 reference model series dimensions (mm) ablmns1s2 fng 0b fng 1b fng 2b fng 3b fng 4b fng 5b 11.0 35.0 25.0 8 7 13.5 42.0 33.0 10 9 16.5 48.0 36.0 13 12 19.0 56.5 41.5 15 15 reference model series dimensions (mm) alms1s2 feg 0b feg 1b feg 2b feg 3b ~m ~l ? a s 1 s 2 fdg straight plug, long version, key (g) or keys (a?l), cable collet 12 68 57 10 9 15 79 67 13 12 reference model series dimensions (mm) alms1s2 fdg 1b fdg 2b note: cable material: stainless steel with polyamide sheath. in 4b and 5b series the outer shell design is similar to the png model. note: 1) to order, add a ?z? at the end of the reference. the bend relief must be ordered separately (see page 141). m1 cable assembly (page 161) m1 cable assembly (page 161) m1 cable assembly (page 161) m2 cable assembly (page 162)
14 www.lemo.com ? ? ? a e ? b s 3 s 1 n m e maxi l maxi fag fixed plug, non-latching, nut fixing, key (g) or keys (a?m and r) fhg elbow (90) plug, key (g) or keys (a?m and r), cable collet reference model series fag 00 fag 0b fag 1b fag 2b fag 3b fag 4b fag 5b note: 1) maximum length with crimp contacts. the 5b series is delivered with- out locking washer or tapered washer and with a round nut. reference model series fhg 00 1) fhg 0b fhg 1b fhg 2b fhg 3b fhg 4b fhg 5b p1 panel cut-out (page 152) m ? a ~h s 2 l d s 1 s 3 dimensions (mm) adhlms1s2s3 s 1 e maxi s 3 e ? b ? a m n l maxi fwg fixed plug, nut fixing, key (g) or keys (a?l) p9 panel cut-out (page 152) 18.0 15.8 m12x1.0 2.9 24.9 17 24.8 10.5 14 19.5 19.2 m15x1.0 4.1 28.6 18 27.3 13.5 17 reference model series dimensions (mm) ab e elmn 1) s1 s3 fwg 1b fwg 2b note: 1) maximum length with crimp contacts 8 10.2 m7x0.5 2.9 18.1 9.0 15.0 6.3 9 10 12.4 m9x0.6 4.2 20.8 11.2 18.9 8.2 11 14 15.8 m12x1.0 5.4 25.2 12.5 21.6 10.5 14 18 19.2 m15x1.0 6.0 28.7 13.8 23.9 13.5 17 22 25.0 m18x1.0 5.8 32.1 17.0 30.2 16.5 22 29 34.0 m25x1.0 6.8 37.1 20.5 34.7 23.5 30 40 40.0 m35x1.0 6.8 47.1 28.0 42.8 33.5 ? dimensions (mm) ab e e l mn 1) s1 s3 note: 1) the surface design of the 00 series is different. 7.7 5.2 18.0 24.5 16.5 7 5 5.5 11.0 6.5 26.0 31.6 21.6 10 7 8.0 13.5 8.0 30.5 36.0 25.0 11 9 10.0 16.5 9.0 34.0 41.5 29.5 14 12 13.0 19.0 10.0 37.0 50.0 35.0 17 14 15.0 26.0 15.0 52.0 67.0 49.0 22 20 21.0 36.0 21.0 74.0 90.0 65.0 32 30 31.0 m3 cable assembly (page 161) fig straight plug for remote handling, key (g) or keys (a?l and r), special alignment mark, knurled handling surface, cable collet ? a s 2 ~m ~l s 1 s 3 n 20 49 37 17.5 13 12 15 22 58 43 21.5 15 14 18 30 75 57 28.5 21 20 25 40 103 78 41.0 31 30 35 reference model series dimensions (mm) a l m n s1 s2 s3 fig 2b fig 3b fig 4b fig 5b m1 cable assembly (page 161)
15 www.lemo.com fmg elbow (90) plug, key (g) or keys (am), cable collet and lanyard release, long key reference model series fmg 0b note: cable material: stainless steel with polyamide sheath m ?a ~h s 2 l s 1 s 3 b n 11 17 26 31.6 21.6 140 10 7 8 dimensions (mm) a b h l m n s1 s2 s3 s 4 m s 1 l ~h n ?a s 2 s 3 fkg elbow (90) plug for remote handling, key (g) or keys (al), special alignment mark, knurled handling surface, cable collet reference model series fkg 3b fkg 4b 25 37 50 35 21.0 17 14 15 21 32 52 67 49 28.5 22 20 21 26 dimensions (mm) ahlmns1s2s3s4 note: dimension d is the same as for the fhg model. e ? b s 1 e maxi s 3 n m l maxi ? a egg fixed socket, nut fixing, key (g) or keys (am and r) 8 10.2 m7x0.5 6.0 15.5 1.0 13.7 6.3 9 10 12.4 m9x0.6 7.0 20.7 1.2 19.1 8.2 11 14 15.8 m12x1.0 7.5 23.0 1.5 21.1 10.5 14 18 19.2 m15x1.0 8.5 26.7 1.8 24.6 13.5 17 22 25.0 m18x1.0 11.5 30.7 2.0 28.1 16.5 22 28 34.0 m25x1.0 12.0 35.7 2.5 34.1 23.5 30 40 40.0 m35x1.0 11.0 43.5 3.0 39.6 33.5 C reference model series egg 00 egg 0b egg 1b egg 2b egg 3b egg 4b egg 5b dimensions (mm) ab e e l mn 1) s1 s3 note: 1) maximum length with crimp contacts. the 5b series is delivered with a tapered washer and a round nut. ?a e ?b s 1 e maxi s 3 m l maxi n eng fixed socket with earthing tag, nut fixing, key (g) or keys (am) 10 12.4 m9x0.6 7.0 20.7 1.2 19.1 8.2 11 14 15.8 m12x1.0 7.5 23.0 1.5 21.1 10.5 14 18 19.2 m15x1.0 8.5 26.7 1.8 24.6 13.5 17 22 25.0 m18x1.0 11.5 30.7 2.0 28.1 16.5 22 28 34.0 m25x1.0 12.0 35.7 2.5 34.1 23.5 30 reference model series eng 0b eng 1b 2) eng 2b eng 3b eng 4b dimensions (mm) ab e e l mn 1) s1 s3 note: 1) maximum length with crimp contacts. 2) for the 1b series the earthing tag is on the upper side. p1 panel cut-out (page 152) p1 panel cut-out (page 152) m3 cable assembly (page 161) m3 cable assembly (page 161)
16 www.lemo.com ? ? n l maxi m ? b ? a ejg fixed socket, press or adhesive fit, key (g) or keys (a?m) note: 1) maximum length with crimp contacts. ? a e ? b s 3 s 1 e maxi n m l maxi ehg fixed socket, nut fixing, key (g) or keys (a?m and r), and protruding shell 8.0 10.2 m7x0.5 2.0 15.5 8.5 13.7 6.3 9 10.0 12.4 m9x0.6 2.0 19.5 12.5 19.1 8.2 11 14.0 15.8 m12x1.0 4.0 21.7 12.0 21.1 10.5 14 18.0 19.2 m15x1.0 5.1 22.7 12.5 24.6 13.5 17 22.0 25.0 m18x1.0 7.1 30.7 13.5 30.3 16.5 22 40.0 40.0 m35x1.0 2.5 43.5 28.0 38.5 33.5 ? reference model series ehg 00 ehg 0b ehg 1b ehg 2b ehg 3b ehg 5b dimensions (mm) ab e elmn 1) s1 s3 note: 1) maximum length with crimp contacts. the 5b series is delivered without locking washer or tapered washer and with a round nut. 9.2 8.35 20.7 1.5 19.1 12.5 11.20 23.0 1.5 21.1 16.5 14.00 26.7 1.5 24.6 reference model series dimensions (mm) ab lmn 1) ejg 0b ejg 1b ejg 2b p1 panel cut-out (page 152) p5 panel cut-out (page 152) n l maxi ? a e ? b e maxi s 1 m 3.2 mini esg fixed socket with two round nuts, key (g) or keys (a?l), long threaded shell (back panel mounting) 9.5 9 m7x0.5 4.2 15.5 2 13.7 ? 14.0 14 m12x1.0 8.0 23.0 2 21.1 10.5 reference model series esg 00 esg 1b dimensions (mm) ab e e l mn 1) s1 note: 1) maximum length with crimp contacts. p1 panel cut-out 1b series (page 152) p2 panel cut-out 00 series (page 152) e ? b s 1 e maxi s 3 n m l maxi ? a ekg fixed socket, nut fixing, key (g) or keys (a?l and r), special alignment mark on the front 18 19.2 m15x1.0 8.5 26.7 1.8 24.6 13.5 17 22 25.0 m18x1.0 11.5 30.7 2.0 28.1 16.5 22 28 34.0 m25x1.0 12.0 35.7 2.5 34.1 23.5 30 40 40.0 m35x1.0 11.0 43.5 3.0 39.6 33.5 ? reference model series ekg 2b ekg 3b ekg 4b ekg 5b dimensions (mm) ab e e l mn 1) s1 s3 note: 1) maximum length with crimp contacts. the 5b series is delivered with a tapered washer and a round nut. p1 panel cut-out (page 152)
17 www.lemo.com ?? ? a e ? b s 1 n p m l maxi e maxi s 2 eeg fixed socket, nut fixing, key (g) or keys (am and r) (back panel mounting) reference model series eeg 00 eeg 0b eeg 1b eeg 2b eeg 3b eeg 5b 10 9.5 m7x0.5 2.3 15.5 2.5 13.7 6.0 6.3 7.5 12 12.5 m9x0.6 2.4 20.7 2.5 19.1 6.3 8.2 9.0 16 16.0 m12x1.0 6.5 23.0 3.5 21.1 11.0 10.5 13.0 20 20.0 m15x1.0 3.0 26.7 3.5 24.6 9.0 13.5 15.0 24 25.0 m18x1.0 5.0 30.7 4.5 28.1 12.0 16.5 20.0 41 40.0 m35x1.0 13.5 43.5 5.0 39.6 19.5 33.5 38.0 dimensions (mm) ab e e l mn 1) ps1s2 note: 1) maximum length with crimp contacts. the 3b and 5b series are delivered with a conical nut. the 5b series is delivered without locking washer or tapered washer. p1 panel cut-out (page 152) reference model series ecg 00 ecg 0b ecg 1b ecg 2b ecg 3b ecg 4b ecg 5b ? a e ? b s 3 n m l maxi e maxi s 1 ecg fixed socket with two nuts, key (g) or keys (am and r) (back panel mounting) 10 10.2 m7x0.5 4.3 13.7 2.5 13.7 6.3 9 12 12.4 m9x0.6 5.5 20.7 2.5 19.1 8.2 11 16 15.8 m12x1.0 6.0 23.0 3.5 21.1 10.5 14 20 19.2 m15x1.0 6.5 26.7 3.5 24.6 13.5 17 24 25.0 m18x1.0 9.0 30.7 4.5 28.1 16.5 22 30 34.0 m25x1.0 10.0 35.7 4.5 32.6 23.5 30 41 40.0 m35x1.0 9.0 43.5 5.0 39.6 33.5 C dimensions (mm) ab e e lmn 1) s1 s3 p15 pcb drilling pattern (page 154) reference model series ecg 00 ecg 0b ecg 1b ecg 2b ecg 3b ecg 4b ecg 5b ? a e ? b s 3 n l m e maxi s 1 ecg fixed socket with two nuts, key (g) or keys (af and r) and straight contact for printed circuit (back panel mounting) 10 10.2 m7x0.5 4.3 2.5 13.7 6.3 9 12 12.4 m9x0.6 5.5 2.5 16.4 8.2 11 16 15.8 m12x1.0 6.0 3.5 19.8 10.5 14 20 19.2 m15x1.0 6.5 3.5 21.8 13.5 17 24 25.0 m18x1.0 9.0 4.5 25.8 16.5 22 30 34.0 m25x1.0 10.0 4.5 29.8 23.5 30 41 40.0 m35x1.0 9.0 5.0 36.8 33.5 C dimensions (mm) a b e e m n s1 s3 note: this contact type is available for e ll socket models fitted with female contacts. length ?l? depends on the number of contacts, see table on page 156. the 5b series is delivered with a tapered washer and a round nut. the 3b, 4b and 5b series are delivered with a conical nut. note: 1) maximum length with crimp contacts. the 3b, 4b and 5b series are delivered with a conical nut. the 5b series is delivered with a tapered washer and a round nut. ? a e ? b n p m l maxi e maxi s 2 efg fixed socket, nut fixing, key (g) or keys (am), with two flats on the shell and o-ring (back panel mounting) 12 12.5 m9x0.6 5.5 20.7 2.5 19.1 9 8 reference model series efg 0b dimensions (mm) ab e e l mn 1) ps2 p2 panel cut-out (page 152) p1 panel cut-out (page 152) note: 1) maximum length with crimp contacts. p1 panel cut-out (page 152)
l n ?a k m 1.6 h b ezg straight socket for printed circuit, key (g) or keys (af) 9 10 7.62 8 15.0 11 12 7.62 8 19.0 14 15 10.16 9 22.5 reference model series dimensions (mm) abhkn ezg 0b ezg 1b ezg 2b note: length ?l? depends on the number of contacts, see table on page 156. pcb drilling pattern (pages 154 and 156) p15 p16 + 18 www.lemo.com eyg fixed socket for printed circuit, nut fixing, key (g) or keys (af) (back panel mounting) 12 10 12.5 m9x0.6 2.6 2.5 15 6 8.2 14 12 16.0 m11x0.5 5.0 3.5 19 10 C reference model series eyg 0b eyg 1b dimensions (mm) ab c e em n ps1 l ?a e p 9 m e maxi n s 1 ?c m 1.6 7.62 b pcb drilling pattern (pages 154 and 156) p15 p16 + note: length ?l? depends on the number of contacts, see table on page 156. p1 panel cut-out 0b series (page 152) p10 panel cut-out 1b series (page 152) ?a ?0.7 n 3 h b k ?0.5 ezg straight socket for printed circuit, key (g) or keys (a, b) 6.8 7 5.08 7 14 reference model series dimensions (mm) abhkn ezg 00 pcb drilling pattern (pages 154 and 156) p15 p16 + dimensions (mm) ab e e m s1s3 n max reference model series ecg 0b ecg 1b ecg 2b ecg 3b ecg fixed socket with two nuts, key (g) or keys (af) with elbow (90) contact for printed circuit (back panel mounting) 12 12.4 m9x0.6 2.4 2.5 18.3 8.2 11 16 15.8 m12x1.0 6.0 3.5 20.3 10.5 14 20 19.2 m15x1.0 6.5 3.5 22.3 13.5 17 24 25.0 m18x1.0 9.0 4.5 25.8 16.5 22 note: this female contact type is available for all back panel mounting socket models. length ?l? depends on the number of contacts, see pcb drilling pattern on page 157. for male contacts, sockets are available upon request, with j, k or l keys. the 3b series is delivered with a conical nut. p17 pcb drilling pattern (page 157) p1 panel cut-out (page 152) ?a e ?b s 3 n m s 1 e maxi 2 20 mini l
6.8 26.0 5.5 5 9.5 35.5 8.0 7 12.5 40.5 10.0 9 16.5 47.0 13.0 12 19.0 56.0 15.0 14 26.0 73.0 21.0 20 36.0 99.0 31.0 30 s 2 ~l s 1 ?a phg free socket, key (g) or keys (a? and r), cable collet reference model series dimensions (mm) a l s1 s2 phg 00 1) phg 0b phg 1b phg 2b phg 3b phg 4b phg 5b ~l s 2 s 1 ?a phg free socket, key (g) or keys (a?), cable collet and nut for fitting a bend relief 2) 6.8 34.0 5.5 6 9.5 34.5 8.0 7 12.5 39.5 10.0 9 16.5 46.0 13.0 12 19.0 54.5 15.0 15 26.0 69.0 21.0 20 reference model series dimensions (mm) a l s1 s2 phg 00 1) phg 0b phg 1b phg 2b phg 3b phg 4b note: 1) the surface design of the 00 series is different. note: 1) the surface design of the 00 series is different. 2) to order, add a ??at the end of the reference. the bend relief must be ordered separately (see page 141). 19 www.lemo.com xpf fixed socket, nut fixing, long shell, keys (f) for printed circuit (back panel mounting) reference model series xpf 0b ?a e ?b p l m e maxi r n 5.08 1 note: length ??depends on the number of contacts, see table on page 156. p2 12 11 m9x0.6 1.5 2.5 19 5 4 dimensions (mm) ab e e mn p r panel cut-out (page 152) pcb drilling pattern (pages 154 and 156) p15 p16 + m1 cable assembly (page 161) m1 cable assembly (page 161)
20 www.lemo.com ?a e ?b s 3 m e maxi s 1 s 2 ~l pfg fixed socket, with two nuts, key (g) or keys (am and r), cable collet (back panel mounting) reference model series pfg 00 pfg 0b pfg 1b pfg 2b pfg 3b pfg 4b pfg 5b 10 10.2 m7x0.5 5.3 26.0 2.5 6.3 5 9 12 12.4 m9x0.6 5.0 35.5 2.5 8.2 7 11 16 15.8 m12x1.0 5.0 40.5 3.5 10.5 9 14 20 19.2 m15x1.0 6.5 47.0 3.5 13.5 12 17 24 25.0 m18x1.0 9.0 56.0 4.5 16.5 14 22 30 34.0 m25x1.0 11.0 73.0 4.5 23.5 20 30 41 40.0 m35x1.0 10.0 99.0 5.0 33.5 30 C ~l ?a e s 3 s 1 m e maxi ?b s 2 pkg fixed socket, nut fixing, key (g) or keys (am and r), cable collet reference model series pkg 00 pkg 0b pkg 1b pkg 2b pkg 3b pkg 4b pkg 5b 8 10.2 m7x0.5 6.5 26.0 1.0 6.3 5 9 10 12.4 m9x0.6 7.0 35.5 1.2 8.2 7 11 14 15.8 m12x1.0 7.5 40.5 1.5 10.5 9 14 18 19.2 m15x1.0 8.5 47.0 1.8 13.5 12 17 22 25.0 m18x1.0 11.5 56.0 2.0 16.5 14 22 28 34.0 m25x1.0 12.0 73.0 2.5 23.5 20 30 40 40.0 m35x1.0 11.0 99.0 3.0 33.5 30 C dimensions (mm) a b e e l m s1 s2 s3 p1 panel cut-out (page 152) note: the 3b, 4b and 5b series are delivered with a conical nut. the 5b series is delivered with a tapered washer and a round nut. note: the 5b series is delivered with a tapered washer and a round nut. p1 panel cut-out (page 152) m1 cable assembly (page 161) m1 cable assembly (page 161) ~l ? a b s 2 s 1 n png free socket, nut fixing, key (g) or keys (al and r), cable collet with lanyard release 12.5 20.0 40.5 140 10 9 16.5 24.2 47.0 160 13 12 19.0 26.6 56.0 190 15 14 26.0 36.2 73.0 230 21 20 36.0 48.0 99.0 300 31 30 reference model series dimensions (mm) a b l n s1 s2 png 1b png 2b png 3b png 4b png 5b note: cable material: stainless steel with polyamide sheath m1 cable assembly (page 161) dimensions (mm) a b e e l m s1 s2 s3
21 www.lemo.com ?? l s 3 m ? a ? b e s 1 e maxi r ll fixed coupler, nut fixing, key (g) or keys (a and j) at the flange end and keys (j, k or m) at the other end reference model series rgg 1) 0b rgg 2) 0b rjg rgj 0b rak rgm rgg 2) 1b rjg 1b rgj rjg 2b rgj rgj 3b rgj 4b female C female 12 13.8 m10x0.75 8.0 34 2.0 9.0 12 female C female 12 13.8 m10x0.75 8.0 43 2.0 9.0 12 male C female female C male 12 13.8 m10x0.75 8.0 34 2.0 9.0 12 female C male female C male female C female 16 19.2 m14x1.00 8.5 47 2.5 12.5 17 male C female 16 19.2 m14x1.00 8.5 39 2.5 12.5 17 female C male male C female 20 21.5 m16x1.00 12.0 44 4.0 15.0 19 female C male female C male 25 27.0 m20x1.00 32.0 53 4.0 18.5 24 female C male 34 34.0 m25x1.00 50.0 65 4.0 23.5 30 contacts dimensions (mm) type a b e e l m s1 s3 note: 1) only available with two contacts. 2) only available with three contacts. for this fixed coupler, the first contact type mentioned is always the one at the flange end. on request, these couplers can be produced in other series, with other keys. rgg g g g j j g rjg rgj a k rak g m rgm peg fixed socket, nut fixing, key (g) or keys (al), cable collet (back panel mounting) reference model series peg 3b peg 4b 24 22 m18x1.0 5.0 56 4.5 16.5 14 20 12 32 34 m25x1.0 12.5 73 5.0 23.5 20 27 20 dimensions (mm) a b e e l m s1 s2 s4 p p1 panel cut-out (page 152) s 2 ~l s 1 m p e ? a ? b s 4 e maxi note: the 4b series has an o-ring on the flange. p4 panel cut-out (page 152) m1 cable assembly (page 161) alignment key see page 31. example plug with key g rgj plug with key j
|
