150-watt half-brick hbs150 dc-dc series data sheet rev. feb 13, 2006 page 1 of 3 www.power-one.com technical specifications hbs single output dc-dc converters provide up to 150 watts of output power in an industry standard, half-brick package and footprint. the hbs series features excellent efficiency, class a conducted noise specifications, and fixed switching frequency. the hbs features open-frame packaging, along with planar magnetics to provide maximum useable power with minimal thermal constraints. the hbs series is well suited for telecom, networking, and industrial applications, and is fully compatible with production board-washing processes. description features notes ? mtbf predictions may vary slightly from model to model. specifications typically at 25 c, normal line, and full load, unless otherwise stated. soldering conditions: i/o pins, 260 c, ten seconds; fully compatible with commercial wave-soldering equipment. units are water-washable and fully compatible with commercial spray or immersion post wave-solder washing equipment. turn-on time 10 ms remote shutdown positive or negative logic remote shutdown reference v in negative switching frequency 500 khz isolation input - output 1500 vdc input - case 1050 vdc output - case 500 vdc temperature coefficient 0.2%/c case temperature operating range -40 to +100 c storage range -40 to +125 c thermal shutdown range 105 to 115 c vibration, 3 axes, 5 min each 5 g, 10 - 55 hz mtbf ? (bellcore tr-nwt-000332) 2.1 x 10 6 hrs safety ul, cul, vde weight (approx.) 2.5 oz general ? rohs lead solder exemption compliant ? industry-standard half-brick ? open-frame packaging ? 100 c base plate operation ? water washable ? ?true-trim? option ? 1500 v isolation ? positive or negative logic setpoint accuracy 1% line regulation v in min. - v in max., i out rated 0.2% v out load regulation i out min. - i out max., v in nom. 0.2% v out remote sense headroom 0.5 vdc minimum output current 10%, i out rated dynamic regulation, loadstep 25% i out pk deviation 4% v out settling time 500 s voltage trim range 10% short circuit / overcurrent protection hiccup current limit threshold range, % of i out rated 110 - 140% ovp trip range 115 - 140% v out nom. ovp hiccup output voltage range 24 vdc nominal 18 - 36 vdc 48 vdc nominal 34 - 75 vdc reflected ripple 25 ma input reverse voltage protection shunt diode input hbs150zg-a 70 72 74 76 78 80 82 84 86 88 10 20 30 40 50 60 70 80 90 100 load % eff. (34v) eff. (48v) eff. (75v) efficiency vs. load (48v input)
150-watt half-brick hbs150 dc-dc series data sheet rev. feb 13, 2006 page 2 of 3 www.power-one.com model input voltage input voltage maximum input output rated output ripple & noise typical (volts) range (volts) current (amps)* voltage (volts) current (amps) pk-pk (mv) efficiency** hbs150yg-a 24 18-36 11.7 5 30 100 80% hbs150yh-a 24 18-36 10.5 12 12.5 150 85% hbs150zg-a 48 34-75 5.84 5 30 100 83% hbs150zh-a 48 34-75 5.2 12 12.5 150 86% hbs150zj-a 48 34-75 5.2 15 10 150 84% hbs150zk-a 48 34-75 5.2 24 6.25 240 86% notes: * maximum input current at minimum input voltage, maximum rated output power. ** at nominal v in , rated output. thermal impedance natural convection 3.4 c/w 100 lfm 2.7 c/w 200 lfm 2.2 c/w 300 lfm 1.8 c/w 400 lfm 1.6 c/w tolerances note: thermal impedance data is dependent on many environmental factors. the exact thermal performance should be validated for specific application. 1-v in 2 case 3 on/off 4+v in 5-v out 6 -sense 7 trim 8 +sense 9+v out inches: (millimeters) .xx 0.020 .x 0.5 .xxx 0.010 .xx 0.25 pin: 0.002 0.05 (dimensions as listed unless otherwise specified.) pin function bottom view (pin side) side view 0.400"(10.2mm) 1.000"(25.4mm) 1.400"(35.6mm) 0.700"(17.8mm) 0 -0.50"(-12.7mm) (61.0mm) 2.40" m3x.5 through 4pl mounting inserts (57.9mm) 2.28" hbs 9 8 7 6 5 4 3 2 1 (0.6mm) (2.0mm) (1.0mm) (4.6mm) 0.18" (12.7mm) 0.50" 0.025" ref. dia 0.040" dia 0.080" (48.3mm) 1.900" (-4.8mm) -0.19" 0 model selection mechanical drawing model numbers highlighted in yellow or shaded are not recommended for new designs.
options rev. feb 13, 2006 page 3 of 3 www.power-one.com series applicability: has, hbd, hbs, hes, qbs, qes, tes, tqd features & options descriptions suffix code remote on/off positive logic none negative logic n trim standard power-one (negative) none industry-standard (positive) t pin length 0.18? (4.6mm), standard model length none 0.145? (3.68mm) 7 0.110? (2.8mm) 8 special options customer-specific models s# note: contact factory for availability of specific options. nuclear and medical applications - power-one products are not designed, intended for use in, or authorized for use as critical c omponents in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written conse nt of the respective divisional president of power-one, inc. technical revisions - the appearance of products, including safety agency certifications pictured on labels, may change dependin g on the date manufactured. specifications are subject to change without notice. ordering information suffix code identification:
|
