spec no: dsaf1344 rev no: v.1 date: mar/30/2005 page: 1 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003837 package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3. specifications are subject to change without notice. 2.0x1.25mm smd chip led lamp features 2.0x1.25mm smt led,0.5mm max.thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colors and lens types available. package : 2000pcs / reel. rohs compliant. aphcm2012syck - f01 super bri ght yello w description the super bright yellow source color devices are made with dh ingaalp on gaas substrate light emitting diode .
spec no: dsaf1344 rev no: v.1 date: mar/30/2005 page: 2 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003837 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 ? 1/2 aphcm2012syck - f01 super bright yellow (ingaaip) water clear 36 120 110 symbol parameter device typ. max. test conditions units peak peak wavelength super bright yellow 590 nm i f =20ma d dominant wavelength super bright yellow 590 nm i f =20ma ? 1/2 spectral line half - width super bright yellow 20 nm i f =20ma c capacitance super bright yellow 20 pf v f =0v;f=1mhz v f forward voltage super bright yellow 2.0 2.5 v i f =20ma i r reverse current super bright yellow 10 ua v r = 5v parameter super bright yellow units power dissipation 125 mw dc forward current 30 ma peak forward current [1] 175 ma reverse voltage 5 v operating/storage temperature - 40c to +85c
spec no: dsaf1344 rev no: v.1 date: mar/30/2005 page: 3 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003837 super bright yellow aphcm2012syck - f01
spec no: dsaf1344 rev no: v.1 date: mar/30/2005 page: 4 of 4 approved: j. lu checked: allen liu drawn: y.w.wang erp: 1203003837 tape specifications (units : mm ) recommended soldering pattern (units : mm ) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/ - 1nm 2. luminous intensity: +/ - 15% 3. forward voltage: +/ - 0.1v note: accuracy may depend on the sorting parameters. aphcm2012syck - f01
|
