View XC6216B941PR-G_3777532.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/43 xc6216/xe6216 series voltage regulators with stand-by function - input voltage: 28v features max output current : more than 150ma (200ma limit) (v in =v out +3.0v) dropout voltage input voltage range output voltage range : 300mv@i out =20ma : 2.0v~28.0v : 2.0v~12.0v (0.1v increments) 2.0v~23v with external resistors fixed output accuracy : 2% 1% optional for xc6216 series low power consumption : 5 a stand-by current : less than 0.1 a high ripple rejection : 30db@1khz operating temperature : -40 ~+85 low esr capacitor : ceramic capacitor compatible built?in protection : current limit circuit thermal shutdown circuit packages : sot-25, sot-89, sot-89-5, environmentally friendly usp-6c, sot-223, to-252 : eu rohs compliant, pb free general description xc6216/xe6216 series are positive voltage regulator ics with 28v of operation voltage. the se ries consists of a voltage reference, an error amplifier, a current limiter, a thermal shutdown circuit and a phase compensation circuit plus a driver transistor. the output voltage is selectable in 0.1v increments within the ra nge of 2.0v to 12v using laser trimming technologies. with external resistors, the output voltage range can be expanded from 2.0v to 23v. the output stabilization capacitor (c l ) is also compatible with low es r ceramic capacitors. the over current protection circuit and the thermal shutdown circ uit are built-in. these two protection circuits will operate when the output current reaches current limit level or the junction temperature reaches temperature limit level. the ce function enables the output to be turned off and the ic becomes a stand-by mode resulting in greatly reduced power consumption. applications car audio, car navigation systems note book computers, pdas home appliances audio visual equipment (cameras, vcrs, etc.) cordless phones, wireless communication e q ui p ment typical application circuit typical performance characteristics output voltage vs. input volatage etr0321_016
2/43 xc6216/xe6216 series pin number sot-25 sot-89-5 usp-6c pin name functions 1 5 6 v in power input 2 2 5 v ss ground 3 4 2,4 nc no connection 4 3 3 ce on/off control 5 1 1 v out output pin number sot-25 sot-89-5 usp-6c pin name functions 1 5 6 v in power input 2 2 5 v ss ground 3 4 4 v ofb output voltage adjustment 4 3 3 ce on/off control 5 1 1 v out output - - 2 nc no connection pin number sot-89 sot-223 to-252 pin name functions 3 3 1 v in power input 2 2 2 v ss ground 1 1 3 v out output pin configuration pin assignment * the dissipation pad for the usp-6c package should be solder-plated in reference mount pattern and metal masking so as to enhance mounting strength and heat release. if the pad needs to be connected to other pins, it should be connected to the v ss (no. 5) pin. xc6216b series xc6216c series xc6216d series sot-25 (top view) sot-89 (top view) sot-89-5 (top view) usp-6c (bottom view) sot-223 (top view) to-252 (top view)
3/43 xc6216/xe6216 series pin number sot-89-5 pin name functions 1 v out output 2 v ss ground 3 ce on/off control 4 nc no connection 5 v in power input pin name designator conditions ic operation l 0v Q v ce Q 0.35v off h 1.1v Q v ce Q 28.0v on ce open ce=open undefined state series chip enable pin xc6216b/xe6216b available xc6216c available xc6216d not available pin assignment xe6216b series logic condition for the pin pin function assignment * please avoid the state of open, and make ce pin arbitrary fixed potential. (xc6216b series, xe6216b series, xc6216c series)
4/43 xc6216/xe6216 series designator item symbol description b fixed output voltage, 2.0v~12.0v(0.1v increments) type and options of regulators c output voltage externally set (v ofb =2.0v) 20 ~ c0 for the voltage within 2.0v ~9.9v (0.1v increments); e.g. 2.5v ? 25, 5.0v ? 50 for the voltage within 10.0v~12.0v (0.1v increments); e.g. 10.6v ? a6, 11.2v ? b2, 12.0v ? c0 ? output voltage 20 for c type (output voltage externally set), v ofb =2.0v only 2 2% output voltage accuracy (*2) 1 1% mr sot-25 (3,000/reel) mr-g sot-25 (3,000/reel) pr sot-89-5 (1,000/reel) pr-g sot-89-5 (1,000/reel) er usp-6c (3,000/reel) ?- (*1) packages (order unit) er-g usp-6c (3,000/reel) designator item symbol description ? output voltage 20 ~ c0 for the voltage within 2.0v~9.9v (0.1v increments); e.g. 2.5v ? 25, 5.0v ? 50 for the voltage within10.0v~12.0v (0.1v increments); e.g. 10.6v ? a6, 11.2v ? b2, 12.0v ? c0 2 2% output voltage accuracy 1 1% pr sot-89 (1,000/reel) pr-g sot-89 (1,000/reel) fr sot-223 (1,000/reel) fr-g sot-223 (1,000/reel) jr to-252 (2,500/reel) ?- (*1) packages (order unit) jr-g to-252 (2,500/reel) designator item symbol description ? output voltage 20~c0 for the voltage within 2.0v ~9.9v (0.1v increments); e.g. 2.5v ? 25, 5.0v ? 50 for the voltage within 10.0v~12.0v (0.1v increments); e.g. 10.6v ? a6, 11.2v ? b2, 12.0v ? c0 output voltage accuracy 2 2% pr sot-89-5 (1,000/reel) ? - (*1) package (order unit) pr-g sot-89-5 (1,000/reel) product classification orderin g information xc6216d ???? - (* 1 ) : 3 pin regulator (no ce function), fixed ou tput voltage 2.0v~12.0v(0.1v increments) xe6216b ???? - (* 1 ) : ce function (active high), fixed output voltage 2.0v~12.0v(0.1v increments) characteristics are guaranteed over the temperature range of -40 to 85 . (*1) the ?-g? suffix indicates that the products are halo gen and antimony free as well as being fully rohs compliant. xc6216 ????? - (* 1 ) : ce function (active high) fixed outpu t voltage 2.0v~12.0v(0.1v increments) (*1) the ?-g? suffix indicates that the products are halogen and antimony free as well as being fully rohs compliant. (*1) the ?-g? suffix indicates that the products are halo gen and antimony free as well as being fully rohs compliant. (*2) for the c type, the accuracy is based on v ofb voltage. the actual output voltage accuracy is depended on the external resistances.
5/43 xc6216/xe6216 series block diagrams xc6216 series xc6216b series xc6216c series xc6216d series xe6216b series xe6216 series *diodes inside the circuit are an esd protection diode and parasitic diodes.
6/43 xc6216/xe6216 series parameter symbol ratings units input voltage v in v ss -0.3~+30 v output current i out 300 (*1) ma output voltage v out v ss -0.3~v in +0.3 v ce input voltage v ce v ss -0.3~30 v 250 sot-25 600 (pcb mounted) (*2) 500 sot-89-5 1300 (pcb mounted) (*2) 100 power dissipation usp-6c pd 1000 (pcb mounted) (*2) mw (ta=25 ) operating temperature range topr -40~+85 storage temperature range tstg -55~+125 parameter symbol ratings units input voltage v in v ss -0.3~+30 v output current i out 300 (*1) ma output voltage v out v ss -0.3~v in +0.3 v ce input voltage v ce v ss -0.3 ~ +30 v fb voltage v ofb v ss -0.3 ~ +30 v 250 sot-25 600 (pcb mounted) (*2) 500 sot-89-5 1300 (pcb mounted) (*2) 100 power dissipation usp-6c pd 1000 (pcb mounted) (*2) mw (ta=25 ) operating temperature range topr -40~+85 storage temperature range tstg -55~+125 parameter symbol ratings units input voltage v in v ss -0.3~+30 v output current i out 300 (*1) ma output voltage v out v ss -0.3~v in +0.3 v sot-89 500 300 sot-223 1500 (pcb mounted) (*2) power dissipation to-252 pd 500 mw (ta=25 ) operating temperature range topr -40~+85 storage temperature range tstg -55~+125 *1: pd > (v in -v out ) i out *2: the power dissipation figure shown is pcb mounted. please refer to pages 37 ~ 40 for details. xc6216c series xc6216d series xc6216b series *1: pd > (v in -v out ) i out *2: the power dissipation figure shown is pcb mounted. please refer to pages 37 ~ 40 for details. *1: pd > (v in -v out ) i out *2: the power dissipation figure shown is pcb mounted. please refer to pages 37 ~ 40 for details. absolute maximum ratings
7/43 xc6216/xe6216 series parameter symbol ratings units input voltage v in v ss -0.3 +30 v output current i out 300 (*1) ma output voltage v out v ss -0.3 v in +0.3 v ce input voltage v ce v ss -0.3 +30 v 500 power dissipation sot-89-5 pd 1300 (pcb mounted) (*2) mw ta = 2 5 operating temperat ure range topr -40 +85 junction temperature t j -40 +125 storage temperature range tstg -55 +125 xe6216b series absolute maximum ratings (continued) *1: pd > (v in -v out ) i out *2: the power dissipation figure shown is pcb mounted. please refer to pages 37 ~ 40 for details.
8/43 xc6216/xe6216 series parameter symbol conditions min. typ. max. units circuit output voltage v out(e) (*2) i out =20ma, v ce =v in e-0 v v in =v out(t) +3.0v, v ce =v in (*1) (v out(t) R 3.0v) 150 - - ma maximum output current i outmax v in =v out(t) +3.0v, v ce =v in (*1) (v out(t) 3.0v) 100 - - ma v in =v out(t) +2.0v (*1) 1ma Q i out Q 50ma, v ce =v in , (2.0v Q v out(t) Q 7.0v) - 50 90 mv load regulation v out v in =v out(t) +2.0v (*1) 1ma Q i out Q 50ma, v ce =v in , (7.0v v out(t) Q 12.0v) - 110 140 mv dropout voltage 1 vdif1 (*3) i out =20ma, v ce =v in - e-1 mv i out =100ma, v in =v out(t) +3.0v, v ce =v in (*1) (v out(t) <3.0v) dropout voltage 2 vdif2 (*3) i out =100ma, v ce =v in (*1) (v out(t) R 3.0v) - e-2 mv supply current i ss v ce =v in 1 5 9 a stand-by current i stb v ce =v ss - 0.01 0.10 a line regulation 1 v out / ( v in ? v out ) v out(t) +2.0v Q v in Q 28.0v (*1) i out =5ma, v ce =v in - 0.05 0.10 % / v line regulation 2 v out / ( v in ? v out ) v out(t) +2.0v Q v in Q 28.0v (*1) i out =13ma, v ce =v in - 0.15 0.30 % / v input voltage v in 2.0 - 28.0 v - output voltage temperature characteristics v out / ( topr ? v out ) i out =20ma, v ce =v in -40 Q topr Q 85 - 100 - ppm/ ripple rejection rate psrr v in =[v out(t) +2.0]v+0.5vp-pac (*1) i out =20ma, f=1khz, v ce =v in - 30 - db short current i short v in =v out(t) +2.0v, v ce =v in (*1) - 30 - ma ce ?h? level voltage v ceh - 1.1 - 28.0 v ce ?l? level voltage v cel - 0 - 0.35 v ce ?h? level current i ceh v in =v ce =28.0v -0.1 - 0.1 a ce ?l? level current i cel v in =28.0v, v ce =v ss -0.1 - 0.1 a thermal shutdown detect temperature t tsd junction temperature - 150 - thermal shutdown release temperature t tsr junction temperature - 125 - hysteresis width t tsd -t tsr junction temperature - 25 - - note: *1: v out(t) : nominal output voltage *2: v out(e) : effective output voltage (i.e. the output voltage when ?v out(t) +2.0v? is provided at the v in pin while maintaining a certain i out value.) *3: vdif={v in1 {note 5} - v out1 {note 4} } *4: v out1 : v out(t) 3.0v, a voltage equal to 98% of the output voltage whenever an amply stabilized i out {v out(t) +3.0v} is input. v out(t) R 3.0v, a voltage equal to 98% of the output voltage whenever an amply stabilized i out {v out(t) +2.0v} is input. *5: v in1 : the input voltage when v out1 appears as input voltage is gradually decreased. *6: unless otherwise stated, v in =v out(t) +2.0v. xc6216b series ta = 2 5 electrical characteristics
9/43 xc6216/xe6216 series thermal shutdown detect temperature t tsd junction temperature - 150 - thermal shutdown release temperature t tsr junction temperature - 125 - hysteresis width t tsd -t tsr junction temperature - 25 - - parameter symbol conditions min. typ. max. units circuit output voltage (accuracy 2%) v out(e) (*2) v in =4.0v, i out =20ma , v ce =v in , v ofb =v out 1.96 2.00 2.04 output voltage (accuracy 1%) v out(e) (*2) v in =4.0v, i out =20ma , v ce =v in , v ofb =v out 1.98 2.00 2.02 v divided resistor r fb v in =v out =5.0v, v ce =v ss v ofb =v out 1.70 4.10 6.30 m maximum output current i outmax v in =5.0v, v ce =v in , v ofb =v out 100 - - ma load regulation v out v in =4.0v 1ma Q i out Q 50ma, v ce =v in , v ofb =v out - 50 90 mv dropout voltage1 vdif1 (*3) i out =20ma, v ce =v in , v ofb =v out - 450 600 mv dropout voltage2 vdif2 (*3) i out =100ma, v ce =v in , v ofb =v out - 1900 2600 mv supply current i ss v ce =v in , v ofb =v out 1 5 9 a stand-by current i stb v ce =v ss , v ofb =v out - 0.01 0.10 a line regulation1 v out / ( v in ? v out ) 4.0v Q v in Q 28.0v, i out =5ma, v ce =v in ,v ofb =v out - 0.05 0.10 % / v line regulation2 v out / ( v in ? v out ) 4.0v Q v in Q 28.0v, i out =13ma, v ce =v in , v ofb =v out - 0.15 0.30 % / v input voltage v in 2.0 - 28.0 v - output voltage temperature characteristics v out / ( topr ? v out ) i out =20ma, v ce =v in , v ofb =v out -40 Q topr Q 85 - 100 - ppm/ ripple rejection rate psrr v in =4.0v+0.5vp-pac, i out =20ma, f=1khz, v ce =v in v ofb =v out - 30 - db short current i short v in =4.0v, v ce =v in , v ofb =v out - 30 - ma ce ?h? level voltage v ceh v ofb =v out 1.1 - 28.0 v ce ?l? level voltage v cel v ofb =v out 0 - 0.35 v ce ?h? level current i ceh v in =v ce =28.0v, v ofb =v out -0.1 - 0.1 a ce ?l? level current i cel v in =28.0v, v ce =v ss v ofb =v out -0.1 - 0.1 a note: *1: v out(t) : nominal output voltage *2: v out(e) : effective output voltage (i.e. the output voltage when ?v out(t) +2.0v? is provided at the v in pin while maintaining a certain i out value.) *3: vdif={v in1 {note 5} - v out1 {note 4} } *4: v out1 : v out(t) 3.0v, a voltage equal to 98% of the outpu t voltage whenever an amply stabilized i out {v out(t) +3.0v} is input. *5: v in1 : the input voltage when v out 1 appears as input voltage is gradually decreased. *6: unless otherwise stated, v in =v out(t) +2.0v. xc6216c series ta = 2 5 electrical characteristics (continued)
10/43 xc6216/xe6216 series thermal shutdown detect temperature t tsd junction temperature - 150 - - thermal shutdown release temperature t tsr junction temperature - 125 - - hysteresis width t tsd -t tsr junction temperature - 25 - - parameter symbol conditions min. typ. max. units circuit output voltage v out(e) (*2) i out =20ma e-0 v v in =v out(t) +3.0v (*1) (v out(t) R 3.0v) 150 - - ma maximum output current i outmax v in =v out(t) +3.0v (*1) (v out(t) 3.0v) 100 - - ma v in =v out(t) +2.0v (*1) 1ma Q i out Q 50ma ( 2.0v Q v out(t) Q 7.0v ) - 50 90 mv load regulation v out v in =v out(t) +2.0v (*1) 1ma Q i out Q 50ma ( 7.0v v out(t) Q 12.0v ) - 110 140 mv dropout voltage1 vdif1 (*3) i out =20ma - e-1 mv i out =100ma, v in =v out(t) +3.0v (*1) (v out(t) 3.0v) dropout voltage2 vdif2 (*3) i out =100ma, (v out(t) R 3.0v) (*1) - e-2 mv supply current i ss 1 5 9 a line regulation1 v out / ( v in ? v out ) v out(t) +2.0v Q v in Q 28.0v (*1) i out =5ma - 0.05 0.10 % / v line regulation2 v out / ( v in ? v out ) v out(t) +2.0v Q v in Q 28.0v (*1) i out =13ma - 0.15 0.30 % / v input voltage v in 2.0 - 28.0 v - output voltage temperature characteristics v out / ( topr ? v out ) i out =20ma -40 Q topr Q 85 - 100 - ppm/ ripple rejection rate psrr v in =[v out(t) +2.0]v+0.5vp-pac (*1) i out =20ma, f=1khz - 30 - db short current i short v in =v out(t) +2.0v (*1) - 30 - ma electrical characteristics (continued) xc6216d series ta = 2 5 note: *1: v out(t) : nominal output voltage *2: v out(e) : effective output voltage (i.e. the output voltage when ?v out(t) +2.0v? is provided at the v in pin while maintaining a certain i out value.) *3: vdif={v in1 {note 5} - v out1 {note 4} } *4: v out1 : v out(t) 3.0v, a voltage equal to 98% of the output voltage whenever an amply stabilized i out {v out(t) +3.0v} is input. v out(t) R 3.0v, a voltage equal to 98% of the output voltage whenever an amply stabilized i out {v out(t) +2.0v} is input. *5: v in1 : the input voltage when v out1 appears as input voltage is gradually decreased. *6: unless otherwise stated, vin=v out(t) +2.0v.
11/43 xc6216/xe6216 series e-0 e-1 e-2 parameter nominal output voltage(v) output voltage (v) 2% accuracy output voltage (v) 1% accuracy dropout voltage 1 (mv) i out =20ma dropout voltage 2 (mv) i out =100ma v out(e) v out(e) vdif1 vdif2 v out(t) min. max. min. max. typ. max. typ. max. 2.0 1.960 2.040 1.980 2.020 450 600 1900 2600 2.1 2.058 2.142 2.079 2.121 450 600 1900 2600 2.2 2.156 2.244 2.178 2.222 390 520 1700 2200 2.3 2.254 2.346 2.277 2.323 390 520 1700 2200 2.4 2.352 2.448 2.376 2.424 390 520 1700 2200 2.5 2.450 2.550 2.475 2.525 310 450 1500 1900 2.6 2.548 2.652 2.574 2.626 310 450 1500 1900 2.7 2.646 2.754 2.673 2.727 310 450 1500 1900 2.8 2.744 2.856 2.772 2.828 310 450 1500 1900 2.9 2.842 2.958 2.871 2.929 310 450 1500 1900 3.0 2.940 3.060 2.970 3.030 260 360 1300 1700 3.1 3.038 3.162 3.069 3.131 260 360 1300 1700 3.2 3.136 3.264 3.168 3.232 260 360 1300 1700 3.3 3.234 3.366 3.267 3.333 260 360 1300 1700 3.4 3.332 3.468 3.366 3.434 260 360 1300 1700 3.5 3.430 3.570 3.465 3.535 260 360 1300 1700 3.6 3.528 3.672 3.564 3.636 260 360 1300 1700 3.7 3.626 3.774 3.663 3.737 260 360 1300 1700 3.8 3.724 3.876 3.762 3.838 260 360 1300 1700 3.9 3.822 3.978 3.861 3.939 260 360 1300 1700 4.0 3.920 4.080 3.960 4. 040 220 320 1100 1500 4.1 4.018 4.182 4.059 4. 141 220 320 1100 1500 4.2 4.116 4.284 4.158 4.242 220 320 1100 1500 4.3 4.214 4.386 4.257 4. 343 220 320 1100 1500 4.4 4.312 4.488 4.356 4. 444 220 320 1100 1500 4.5 4.410 4.590 4.455 4. 545 220 320 1100 1500 4.6 4.508 4.692 4.554 4. 646 220 320 1100 1500 4.7 4.606 4.794 4.653 4. 747 220 320 1100 1500 4.8 4.704 4.896 4.752 4. 848 220 320 1100 1500 4.9 4.802 4.998 4.851 4. 949 220 320 1100 1500 electrical characteristics (continued) voltage chart (xc6216 series)
12/43 xc6216/xe6216 series e-0 e-1 e-2 parameter nominal output voltage(v) output voltage (v) 2% accuracy output voltage (v) 1% accuracy dropout voltage 1 (mv) i out =20ma dropout voltage 2 (mv) i out =100ma v out(e) v out(e) vdif1 vdif2 v out(t) min. max. min. max. typ. max. typ. max. 5.0 4.900 5.100 4.950 5.050 190 280 1000 1300 5.1 4.998 5.202 5.049 5.151 190 280 1000 1300 5.2 5.096 5.304 5.148 5.252 190 280 1000 1300 5.3 5.194 5.406 5.247 5.353 190 280 1000 1300 5.4 5.292 5.508 5.346 5.454 190 280 1000 1300 5.5 5.390 5.610 5.445 5.555 190 280 1000 1300 5.6 5.488 5.712 5.544 5.656 190 280 1000 1300 5.7 5.586 5.814 5.643 5.757 190 280 1000 1300 5.8 5.684 5.916 5.742 5.916 190 280 1000 1300 5.9 5.782 6.018 5.841 5.959 190 280 1000 1300 6.0 5.880 6.120 5.940 6.060 190 280 1000 1300 6.1 5.978 6.222 6.039 6.161 190 280 1000 1300 6.2 6.076 6.324 6.138 6.262 190 280 1000 1300 6.3 6.174 6.426 6.237 6.363 190 280 1000 1300 6.4 6.272 6.528 6.336 6.464 190 280 1000 1300 6.5 6.370 6.630 6.435 6.565 170 230 800 1150 6.6 6.468 6.732 6.534 6.666 170 230 800 1150 6.7 6.566 6.834 6.633 6.767 170 230 800 1150 6.8 6.664 6.936 6.732 6.868 170 230 800 1150 6.9 6.762 7.038 6.831 6.969 170 230 800 1150 7.0 6.860 7.140 6.930 7.070 170 230 800 1150 7.1 6.958 7.242 7.029 7.171 170 230 800 1150 7.2 7.056 7.344 7.128 7.272 170 230 800 1150 7.3 7.154 7.446 7.227 7.373 170 230 800 1150 7.4 7.252 7.548 7.326 7.474 170 230 800 1150 7.5 7.350 7.650 7.425 7.575 170 230 800 1150 7.6 7.448 7.752 7.524 7.676 170 230 800 1150 7.7 7.546 7.854 7.623 7.777 170 230 800 1150 7.8 7.644 7.956 7.722 7.878 170 230 800 1150 7.9 7.742 8.058 7.821 7.979 170 230 800 1150 8.0 7.840 8.160 7.920 8.080 170 230 800 1150 electrical characteristics (continued) voltage chart (xc6216 series) (continued)
13/43 xc6216/xe6216 series e-0 e-1 e-2 parameter nominal output voltage(v) output voltage (v) 2% accuracy output voltage (v) 1% accuracy dropout voltage 1 (mv) i out =20ma dropout voltage 2 (mv) i out =100ma v out(e) v out(e) vdif1 vdif2 v out(t) min. max. min. max. typ. max. typ. max. 8.1 7.938 8.262 8. 019 8.181 130 190 700 950 8.2 8.036 8.364 8.1 18 8.282 130 190 700 950 8.3 8.134 8.466 8. 217 8.383 130 190 700 950 8.4 8.232 8.568 8. 316 8.484 130 190 700 950 8.5 8.330 8.670 8. 415 8.585 130 190 700 950 8.6 8.428 8.772 8. 514 8.686 130 190 700 950 8.7 8.526 8.874 8. 613 8.787 130 190 700 950 8.8 8.624 8.976 8. 712 8.888 130 190 700 950 8.9 8.722 9.078 8.81 1 8.989 130 190 700 950 9.0 8.820 9.180 8. 910 9.090 130 190 700 950 9.1 8.918 9.282 9. 009 9.191 130 190 700 950 9.2 9.016 9.384 9. 108 9.292 130 190 700 950 9.3 9.114 9.486 9. 207 9.393 130 190 700 950 9.4 9.212 9.588 9. 306 9.494 130 190 700 950 9.5 9.310 9.690 9. 405 9.595 130 190 700 950 9.6 9.408 9.792 9. 504 9.696 130 190 700 950 9.7 9.506 9.894 9. 603 9.797 130 190 700 950 9.8 9.604 9.996 9. 702 9.898 130 190 700 950 9.9 9.702 10.098 9. 801 9.999 130 190 700 950 10.0 9.800 10.200 9. 900 10.100 130 190 700 950 10.1 9.898 10.302 9. 999 10.201 120 160 650 850 10.2 9.996 10.404 10.09 8 10.302 120 160 650 850 10.3 10.094 10.506 10. 197 10.403 120 160 650 850 10.4 10.192 10.608 10. 296 10.504 120 160 650 850 10.5 10.290 10.710 10. 395 10.605 120 160 650 850 10.6 10.388 10.812 10. 494 10.706 120 160 650 850 10.7 10.486 10.914 10. 593 10.807 120 160 650 850 10.8 10.584 11.016 10.692 10.908 120 160 650 850 10.9 10.682 11.118 10.791 11.009 120 160 650 850 11.0 10.780 11.220 10.890 11.110 120 160 650 850 11.1 10.878 11.322 10.989 11.211 120 160 650 850 11.2 10.976 11.424 11.088 11.312 120 160 650 850 11.3 11.074 11.526 11.187 11.413 120 160 650 850 11.4 11.172 11.628 11.286 11.514 120 160 650 850 11.5 11.270 11.730 11.385 11.615 120 160 650 850 11.6 11.368 11.832 11.484 11.716 120 160 650 850 11.7 11.466 11.934 11.583 11.817 120 160 650 850 11.8 11.564 12.036 11.682 11.918 120 160 650 850 11.9 11.662 12.138 11.781 12.019 120 160 650 850 12.0 11.760 12.240 11.880 12.120 120 160 650 850 electrical characteristics (continued) voltage chart (xc6216 series) (continued)
14/43 xc6216/xe6216 series ta=25 ta=-40 85 parameter symbol conditions min. typ. max. min. typ. max. units circuit output voltage v out(e) (*2) i out 20ma , v ce =v in e-0-1 e-0-2 v v in v out(t) +3.0v, v ce =v in (*1) (v out(t) R 3.0 - - - 150 - - ma maximum output current (*) i outmax v in = v out(t) +3.0v, v ce =v in (*1) (v out(t) 3.0 - - - 100 - - ma load regulation (*) v out v in v out(t) +2.0v, v ce =v in (*1) 1ma Q i out Q 50ma - e-1-1 - e-1-2 mv dropout voltage1 vdif1 (*3) i out 20ma, v ce =v in - e-2-1 - e-2-2 mv dropout voltage2 (*) vdif2 (*3) i out 100ma, v ce =v in - e-3-1 - e-3-2 mv supply current i ss v ce =v in 1 5 9 0.5 5 10 a stand-by current i stb v ce =v ss - 0.01 0.1 - 0.01 4 a line regulation1 (*) v out / ( v in ? v out ) v out(t) +2.0v Q v in Q 28.0v (*1) i out =5ma, v ce =v in - 0.05 0.10 - 0.05 0.12 %/v line regulation2 (*) v out / ( v in ? v out ) v out(t) +2.0v Q v in Q 28.0v (*1) i out =13ma, v ce =v in - 0.15 0.30 - 0.15 0.32 %/v input voltage v in 2.0 28.0 2.0 28.0 v output voltage temperature characteristics v out / ( topr ? v out ) i out 20ma, v ce =v in -40 Q topr Q 85 - 100 350 - - - ppm/ ripple rejection rate psrr v in =[v out(t) +2.0]v+0.5vp-pac (*1) i out 20ma, 1khz , v ce =v in - 30 - - 30 - db short current i short v in =v out(t) +2.0v, v ce =v in (*1) - 30 - - 30 - ma ce "h" level voltage v ceh v in =28.0v - - - 1.1 - 28.0 v ce "l" level voltage v cel v in =28.0v - - - 0 - 0.35 v ce "h" level current i ceh v in =v ce =28.0v -0.1 - 0.1 -0.1 - 0.7 a ce "l" level current i cel v in =28.0v, v ce =v ss -0.1 - 0.1 -0.2 - -0.2 a thermal shutdown detect temperature t tsd junction temperature - 150 - - 150 - thermal shutdown release temperature t tsr junction temperature - 125 - - 125 - hysteresis width t tsd - t tsr junction temperature - 25 - - 25 - - note: *1: v out(t) : nominal output voltage *2: v out(e) : effective output voltage (i.e. the output voltage when ?v out(t) +2.0v? is provided at the v in pin while maintaining a certain i out value.) *3: vdif={v in1 {note 5} - v out1 {note 4} } *4: v out1 : v out(t) 3.0v, a voltage equal to 98% of the output voltage whenever an amply stabilized i out {v out(t) +3.0v} is input. v out(t) R 3.0v, a voltage equal to 98% of the output voltage whenever an amply stabilized i out {v out(t) +2.0v} is input. *5: v in1 : the input voltage when v out1 appears as input voltage is gradually decreased. *6: unless otherwise stated, v in =v out(t) +2.0v. junction temperature range is tj=-40 125 for this table. xe6216b series electrical characteristics (continued)
15/43 xc6216/xe6216 series symbol e-0-1 e-0-2 temperature / ta 25 -40 85 parameter nominal output voltage(v) output voltage (v) accuracy 2% output voltage (v) accuracy +3% , -3.5% v out(e) v out(e) v out(t) min. max. min. max. 2.0 1.960 2.040 1.930 2.060 2.1 2.058 2.142 2.027 2.163 2.2 2.156 2.244 2.123 2.266 2.3 2.254 2.346 2.220 2.369 2.4 2.352 2.448 2.316 2.472 2.5 2.450 2.550 2.413 2.575 2.6 2.548 2.652 2.509 2.678 2.7 2.646 2.754 2.606 2.781 2.8 2.744 2.856 2.702 2.884 2.9 2.842 2.958 2.799 2.987 3.0 2.940 3.060 2.895 3.090 3.1 3.038 3.162 2.992 3.193 3.2 3.136 3.264 3.088 3.296 3.3 3.234 3.366 3.185 3.399 3.4 3.332 3.468 3.281 3.502 3.5 3.430 3.570 3.378 3.605 3.6 3.528 3.672 3.474 3.708 3.7 3.626 3.774 3.571 3.811 3.8 3.724 3.876 3.667 3.914 3.9 3.822 3.978 3.764 4.017 4.0 3.920 4.080 3.860 4.120 4.1 4.018 4.182 3.957 4.223 4.2 4.116 4. 284 4.053 4.326 4.3 4.214 4.386 4.150 4.429 4.4 4.312 4.488 4.246 4.532 4.5 4.410 4.590 4.342 4.635 4.6 4.508 4.692 4.439 4.738 4.7 4.606 4.794 4.535 4.841 4.8 4.704 4.896 4.632 4.944 4.9 4.802 4.998 4.728 5.047 symbol e-0-1 e-0-2 temperature / ta 25 -40 85 parameter nominal output voltage(v) output voltage (v) accuracy 2% output voltage (v) accuracy +3% , -3.5% v out(e) v out(e) v out(t) min. max. min. max. 5.0 4.900 5.100 4.825 5.150 5.1 4.998 5.202 4.921 5.253 5.2 5.096 5.304 5.018 5.356 5.3 5.194 5.406 5.114 5.459 5.4 5.292 5.508 5.211 5.562 5.5 5.390 5.610 5.307 5.665 5.6 5.488 5.712 5.404 5.768 5.7 5.586 5.814 5.500 5.871 5.8 5.684 5.916 5.597 5.974 5.9 5.782 6.018 5.693 6.077 6.0 5.880 6.120 5.790 6.180 6.1 5.978 6.222 5.886 6.283 6.2 6.076 6.324 5.983 6.386 6.3 6.174 6.426 6.079 6.489 6.4 6.272 6.528 6.176 6.592 6.5 6.370 6.630 6.272 6.695 6.6 6.468 6.732 6.369 6.798 6.7 6.566 6.834 6.465 6.901 6.8 6.664 6.936 6.562 7.004 6.9 6.762 7.038 6.658 7.107 7.0 6.860 7.140 6.755 7.210 7.1 6.958 7.242 6.851 7.313 7.2 7.056 7.344 6.948 7.416 7.3 7.154 7.446 7.044 7.519 7.4 7.252 7.548 7.141 7.622 7.5 7.350 7.650 7.237 7.725 7.6 7.448 7.752 7.334 7.828 7.7 7.546 7.854 7.430 7.931 7.8 7.644 7.956 7.527 8.034 7.9 7.742 8.058 7.623 8.137 volta g e chart 1 ( xe6216 series ) electrical characteristics (continued)
16/43 xc6216/xe6216 series symbol e-0-1 e-0-2 temperature /ta 25 -40 85 parameter nominal output voltage(v) output voltage (v) accuracy 2% output voltage (v) accuracy +3% , -3.5% v out(e) v out(e) v out(t) min. max. min. max. 8.0 7.840 8.160 7.720 8.240 8.1 7.938 8.262 7.816 8.343 8.2 8.036 8.364 7.913 8.446 8.3 8.134 8.466 8.009 8.549 8.4 8.232 8.568 8.106 8.652 8.5 8.330 8.670 8.202 8.755 8.6 8.428 8.772 8.299 8.858 8.7 8.526 8.874 8.395 8.961 8.8 8.624 8.976 8.492 9.064 8.9 8.722 9.078 8.588 9.167 9.0 8.820 9.180 8.685 9.270 9.1 8.918 9.282 8.781 9.373 9.2 9.016 9.384 8.878 9.476 9.3 9.114 9.486 8.974 9.579 9.4 9.212 9.588 9.071 9.682 9.5 9.310 9.690 9.167 9.785 9.6 9.408 9.792 9.264 9.888 9.7 9.506 9.894 9.360 9.991 9.8 9.604 9.996 9.457 10.094 9.9 9.702 10.098 9.553 10.197 10.0 9.800 10.200 9.650 10.300 10.1 9.898 10.302 9.747 10.403 10.2 9.996 10.404 9.843 10.506 10.3 10.094 10.506 9.940 10.609 10.4 10.192 10.608 10.036 10.712 10.5 10.290 10.710 10.133 10.815 10.6 10.388 10.812 10.229 10.918 10.7 10.486 10.914 10.326 11.021 10.8 10.584 11.016 10.422 11.124 10.9 10.682 11.118 10.519 11.227 11.0 10.780 11.220 10.615 11.330 11.1 10.878 11.322 10.712 11.433 11.2 10.976 11.424 10.808 11.536 11.3 11.074 11.526 10.905 11.639 11.4 11.172 11.628 11.001 11.742 11.5 11.270 11.730 11.098 11.845 11.6 11.368 11.832 11.194 11.948 11.7 11.466 11.934 11.291 12.051 11.8 11.564 12.036 11.387 12.154 11.9 11.662 12.138 11.484 12.257 12.0 11.760 12.240 11.580 12.360 electrical characteristics (continued) voltage chart 2 (xe6216 series)
17/43 xc6216/xe6216 series symbol e-1-1 e-1-2 e-2-1 e-2-2 e-3-1 e-3-2 temperature /ta 25 -40 85 25 -40 85 25 -40 85 parameter nominal output voltage(v) load regulation (mv) load regulation (mv) dropout voltage 1 (mv) i out =20ma dropout voltage 1 (mv) i out =20ma dropout voltage 2 (mv) i out =100ma dropout voltage 2 (mv) i out =100ma v out v out vdif1 vdif1 vdif2 vdif2 v out(t) (v) typ. max. typ. max. typ. max. typ. max. typ. max. typ. max. 2.0 2.1 450 600 450 735 1900 2600 1900 3060 2.2 2.3 2.4 390 520 390 675 1700 2200 1700 2760 2.5 2.6 2.7 2.8 2.9 310 450 310 620 1500 1900 1500 2620 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 260 360 260 520 1300 1700 1300 2370 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 50 90 50 103 220 320 220 410 1100 1500 1100 2045 electrical characteristics (continued) voltage chart 3 (xe6216 series)
18/43 xc6216/xe6216 series symbol e-1-1 e-1-2 e-2-1 e-2-2 e-3-1 e-3-2 temperature / ta 25 -40 85 25 -40 85 25 -40 85 parameter nominal output voltage(v) load regulation (mv) load regulation (mv) dropout voltage 1 (mv) i out =20ma dropout voltage 1 (mv) i out =20ma dropout voltage 2 (mv) i out =100ma dropout voltage 2 (mv) i out =100ma v out v out vdif1 vdif1 vdif2 vdif2 v out(t) (v) typ. max. typ. max. typ. max. typ. max. typ. max. typ. max. 5.0 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 6.0 6.1 6.2 6.3 6.4 190 280 190 380 1000 1300 1000 1730 6.5 6.6 6.7 6.8 6.9 7.0 50 90 50 103 7.1 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 8.0 110 140 110 150 170 230 170 340 800 1150 800 1580 electrical characteristics (continued) voltage chart 4 (xe6216 series)
19/43 xc6216/xe6216 series symbol e-1-1 e-1-2 e-2-1 e-2-2 e-3-1 e-3-2 temperature / ta 25 -40 85 25 -40 85 25 -40 85 parameter nominal output voltage(v) load regulation (mv) load regulation (mv) dropout voltage 1 (mv) i out =20ma dropout voltage 1 (mv) i out =20ma dropout voltage 2 (mv) i out =100ma dropout voltage 2 (mv) i out =100ma v out v out vdif1 vdif1 vdif2 vdif2 v out(t) (v) typ. max. typ. max. typ. max. typ. max. typ. max. typ. max 8.1 8.2 8.3 8.4 8.5 8.6 8.7 8.8 8.9 9.0 9.1 9.2 9.3 9.4 9.5 9.6 9.7 9.8 9.9 10.0 130 190 130 320 700 950 700 1460 10.1 10.2 10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1 11.2 11.3 11.4 11.5 11.6 11.7 11.8 11.9 12.0 110 140 110 150 120 160 120 285 650 850 650 1160 electrical characteristics ( continued ) voltage chart 5 (xe6216 series)
20/43 xc6216/xe6216 series operational explanation the xc6216/xe6216 series includes a current fold-back circuit as a short circuit protection. when the load current reaches the current limit level, the current fold- back circuit operates and output voltage drops. the output voltage drops further and output current decreases. when the output pin is shorted, a current of about 30ma flows. the ic?s internal circuitry can be shutdown via the signal from the ce pin with the xc6216/xe6216 series. in shutdown mode, output at the v out pin will be pulled down by r11 and r12 to the v ss level. note that as the xc6216/xe6216 series has no pull down resistor so that it will be come unstable with the ce pin open. we s uggest that you use this ic with either a v in voltage or a v ss voltage input at the ce pin. if this ic is used wi th the correct specificatio ns for the ce pin, the operational logic is fixed and the ic will operate normally. ho wever, supply current may increase as a result of through current in the ic?s internal circuitry if a medium voltage is applied. when the junction temperature of the built-in driver transistor reaches the tem perature limit, the thermal shutdown circuit operates and the driver transistor will be set to off. the ic resumes its operation when the thermal shutdown function is released and the ic?s operation is automatically restored becaus e the junction temperature drops to the level of the thermal shutdown release voltage. for the stable operation of the ic, over 2.0v of input voltage is necessary. the output voltage may not be generated normally if the input voltage is less than 2.0v. the voltage divided by resistors r11 & r12 is compared with the internal reference voltage by the error amplifier. the p-channel mosfet which is connected to the v out pin is then driven by the subseq uent controlled signal. the output voltage at the v out pin is controlled and stabilized by a system of negat ive feedback. the current limit circuit and short protect circuit operate in relation to the level of output current and heat dissipation. further, the ic?s internal circuitry can be shutdown via the ce pin?s signal.
21/43 xc6216/xe6216 series the output voltage can be set externally by the following equation: i 21 =i fb +i 22 ??????????????????????????? (1) i 22 =2.0v/r 22 ??????????????????????????? (2) i 21 =i fb +2.0v/r 22 ??????????????????????????? if the equation (3) is assigned to the equat ion (2), the equation becomes as below: v out =2.0v+r 21 ? i 21 ??????????????????????????? (3) for this, the following equation can be used for setting output voltage externally: v out =2.0v+r 21 ? i 21 ??????????????????????????? (4) and the equation (4) will be; v out =2.0v+r 21 ? (i fb +2.0v/r 22 ) ??????????????????????????? =2.0v ? (r 21 + r 22 ) / r 22 + r 21 ? i fb ??????????????????????????? (5) the second term of the equation (6), r 21 ? i fb , is the cause of the output accuracy error. the i fb can be calculated by the following equation: i fb =2.0v / r fb ??????????????????????????? (6) the cause of the output accuracy error, r 21 ? i fb can be calculated by the equation below; r 21 ? i fb =r 21 ? 2.0v/ r fb =2.0v ? r 21 / r fb ??????????????????????????? (7) accordingly, if r 21 << r fb , the output voltage error becomes minute. 1 please use this ic within the stated absolute maximum ratings. the ic is liable to malfunction should the ratings be exceeded. 2 where wiring impedance is high, operatio ns may become unstable due to the noise and/or phase lag depending on output current. please strengthen v in and v ss wiring in particular. 3. phase compensation inside the ic is performed in the xc62 16/xe6216 series. therefore, an abnormal oscillation does not occur even if there is no output capacitor c l . an input capacitor c in around 0.1uf~1.0uf between the power input pin (v in ) and the ground pin (v ss ) is required for input stability. also, the output voltage fluctuation such as under shoot or over shoot, which occurs because of the load change can be controlled by placing the output capacitor c l around 0.1uf~1.0uf between the v out pin and v ss pin. the input capacitor (c in ) and the output capacitor (c l ) should be placed to the ic as close as possible with a shorter wiring. 4. notes on setting output voltage externally (c type) ta=25 notes on use setting resistance-dependant of xc6216 series? output voltage 5. torex places an importance on improv ing our products and its reliability. however, by any possibility, we would request user fail- safe design and post-aging treatment on system or equipment.
22/43 xc6216/xe6216 series test circuits circuit circuit xc6216b/xe6216b series xc6216d series xc6216b/xe6216b series xc6216c series xc6216b/xe6216b series xc6216c series xc6216d series xc6216c series circuit xc6216c series
23/43 xc6216/xe6216 series xc6216b/c/d 202 0.0 0.5 1.0 1.5 2.0 2.5 0 50 100 150 200 250 300 output current: i out (ma) output voltage: v out (v) ta=-40 ta=25 ta=85 v in =v ce =5.0v, ta=25 , c in =c l =1.0 f (ceramic) xc6216b/c/d 202 0.0 0.5 1.0 1.5 2.0 2.5 0 50 100 150 200 250 300 output currrent: i out (ma) output voltage: v out (v) vin=3v vin=4v vin=5v ta=25 , c in =c l =1.0 f (ceramic) xc6216b/d 332 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 50 100 150 200 250 300 output current : iout (ma) output voltage : vout (v) ta=-40 ta=25 ta=85 v in =v ce =6.3v, ta=25 , c in =c l =1.0 f (ceramic) xc6216b/d 332 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 50 100 150 200 250 300 output current: iout (ma) output voltage: vout (v) vin=4.3v vin=5.3v vin=6.3v ta=25 , c in =c l =1.0 f (ceramic) output voltage: v out (v) output current: i out (ma) output voltage: v out (v) output current: i out (ma) xc6216b/d 502 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 50 100 150 200 250 300 output current : iout (ma) output voltage : vout (v) ta=-40 ta=25 ta=85 v in =v ce =8.0v, ta=25 , c in =c l =1.0 f (ceramic) xc6216b/d 502 0.0 1.0 2.0 3.0 4.0 5.0 6.0 0 50 100 150 200 250 300 output current : iout (ma) output voltage : vout (v) vin=6v vin=7v vin=8v ta=25 , c in =c l =1.0 f (ceramic) output current: i out (ma) output voltage: v out (v) output current: i out (ma) output voltage: v out (v) typical performance characteristics (1) output voltage vs. output current
24/43 xc6216/xe6216 series xc6216b/d c02 0 2 4 6 8 10 12 14 0 50 100 150 200 250 300 output current : iout (ma) output voltage : vout (v) ta=-40 ta=25 ta=85 v in =v ce =15.0v, ta=25 , c in =c l =1.0 f (ceramic) xc6216b/d c02 0 2 4 6 8 10 12 14 0 50 100 150 200 250 300 output current : iout (ma) output voltage : vout (v) vin=13v vin=14v vin=15v ta=25 , c in =c l =1.0 f (ceramic) output current: i out (ma) output voltage: v out (v) output current: i out (ma) output voltage: v out (v) xc6216b/c/d 202 1.5 1.6 1.7 1.8 1.9 2.0 2.1 1.5 2 2.5 3 3.5 4 input voltage: vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25 , c in =c l =1.0 f (ceramic) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) xc6216b/c/d 202 1.5 1.6 1.7 1.8 1.9 2.0 2.1 4 8 12 16 20 24 28 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25 , c in =c l =1.0 f (ceramic) input voltage: v in (v) output voltage: v out (v) (1) output voltage vs. output current (continued) (2) output voltage vs. input voltage typical performance chara cteristics (continued) xc6216b/d 332 2.8 2.9 3 3.1 3.2 3.3 3.4 2.8 3.3 3.8 4.3 4.8 5.3 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25, cin=cl=1.0uf(ceramic ) xc6216b/d 332 2.8 2.9 3 3.1 3.2 3.3 3.4 4 8 12 16 20 24 28 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25, cin=cl=1.0uf(ceramic )
25/43 xc6216/xe6216 series xc6216b/d 502 4.0 4.2 4.4 4.6 4.8 5.0 5.2 4 4.5 5 5.5 6 6.5 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25 , c in =c l =1.0 f (ceramic) xc6216b/d 502 4.0 4.2 4.4 4.6 4.8 5.0 5.2 8 1216202428 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25 , c in =c l =1.0 f (ceramic) output voltage: v out (v) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) xc6216b/d c02 10.0 10.5 11.0 11.5 12.0 12.5 13.0 10 11 12 13 14 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25 , c in =c l =1.0 f (ceramic) xc6216b/d c02 10.0 10.5 11.0 11.5 12.0 12.5 14 16 18 20 22 24 26 28 input voltage : vin (v) output voltage : vout (v) iout=1ma iout=10ma iout=30ma ta=25 , c in =c l =1.0 f (ceramic) input voltage: v in (v) input voltage: v in (v) output voltage: v out (v) output voltage: v out (v) xc6216b/c/d 202 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 output current : iout (ma) input/output difference voltage : vdif (v) ta=- 40 ta=25 ta=85 c in =c l =1.0uf (ceramic) xc6216b/d 332 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 output current : iout (ma) input/output difference voltage : vdif (v) ta=- 40 ta=25 ta=85 c in =c l =1.0uf (ceramic) output current: i out (v) dropout voltage : v dif (v) dropout voltage : v dif (v) output current: i out (v) typical performance chara cteristics (continued) (2) output voltage vs. input voltage (continued) (3) dropout voltage vs. output current
26/43 xc6216/xe6216 series xc6216b/d 502 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 output current : iout (ma) input/output difference voltage : vdif (v) ta=-40 ta=25 ta=85 cin=cl=1.0uf(ceramic) xc6216b/d c02 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 output current : iout (ma) input/output difference voltage : vdif (v) ta=-40 ta=25 ta=85 c in =c l =1.0uf (ceramic) output current: i out (v) dropout voltage : v dif (v) dropout voltage: v dif (v) output current: i out (v) xc6216b/c/d 202 0 1 2 3 4 5 6 7 8 9 10 0 4 8 1216202428 input voltage : vin (v) supply current : iss (ua) ta=-40 ta=25 ta=85 xc6216b/c/d 202 0 1 2 3 4 5 6 7 8 9 10 -40 -20 0 20 40 60 80 100 ambient temprature: ta ( ) supply current : iss (ua) v in =4.0v supply current: i ss ( a) supply current: i ss ( a) input voltage: v in (v) xc6216b/d 332 0 1 2 3 4 5 6 7 8 9 10 0 4 8 1216202428 input voltage : vin (v) supply current : iss (ua) ta=-40 ta=25 ta=85 xc6216b/d 332 0 1 2 3 4 5 6 7 8 9 10 -40 -20 0 20 40 60 80 100 ambient temprature: ta ( ) supply current : iss (ua) v in =5.3v input voltage: v in (v) supply current: i ss ( a) supply current: i ss ( a) typical performance chara cteristics (continued) (4) supply current vs. input voltage (3) dropout voltage vs. output current
27/43 xc6216/xe6216 series xc6216b/d 502 0 1 2 3 4 5 6 7 8 9 10 0 4 8 1216202428 input voltage : vin (v) supply current : iss (ua) ta=- 40 ta=25 ta=85 xc6216b/d 502 0 1 2 3 4 5 6 7 8 9 10 -40-200 20406080100 ambient temperature: ta ( ) supply current : iss (ua) v in =7.0v supply current: i ss ( a) input voltage: v in (v) supply current: i ss ( a) xc6216b/d c02 0 1 2 3 4 5 6 7 8 9 10 0 4 8 1216202428 input voltage : vin (v) supply current : iss (ua) ta=- 40 ta=25 ta=85 xc6216b/d c02 0 1 2 3 4 5 6 7 8 9 10 -40-20 0 20406080100 ambient temprature: ta ( ) supply current : iss (ua) v in =14.0v supply current: i ss ( a) supply current: i ss ( a) input voltage: v in (v) xc621b/c/d 202 1.80 1.85 1.90 1.95 2.00 2.05 2.10 2.15 2.20 -50 -25 0 25 50 75 100 ambient temperature: ta ( output voltage : vout (v) iout=1ma iout=10ma iout=20ma cin=cl=1.0 f (ceramic) xc6216b/d 332 3.10 3.15 3.20 3.25 3.30 3.35 3.40 3.45 3.50 -50 -25 0 25 50 75 100 ambient temperature: ta ( ) output voltage : vout (v) iout=1ma iout=10ma iout=20ma c in =c l =1.0 f (ceramic) output voltage: v out (v) output voltage: v out (v) typical performance chara cteristics (continued) (5) output voltage vs. ambient temperature (4) supply current vs. input voltage (continued)
28/43 xc6216/xe6216 series xc6216b/d 502 4.80 4.85 4.90 4.95 5.00 5.05 5.10 5.15 5.20 -50 -25 0 25 50 75 100 ambient temperature: ta ( ) output voltage : vout (v) iout=1ma iout=10ma iout=20ma c in =c l =1.0 f (ceramic) xc6216b/d c02 11.80 11.85 11.90 11.95 12.00 12.05 12.10 12.15 12.20 -50 -25 0 25 50 75 100 ambient temperature: ta ( output voltage : vout (v) iout=1ma iout=10ma iout=20ma c in =c l =1.0 f (ceramic) output voltage: v out (v) output voltage: v out (v) xc6216b/c/d 202 0.0 1.0 2.0 3.0 4.0 5.0 6.0 time ( 1ms / div ) input voltage : vin (v) 1.8 1.9 2.0 2.1 2.2 2.3 2.4 output voltage : vout (v) output voltage input voltage i out =1ma, tr=tf =5 s c l =1 f (ceramic), ta=25 xc6216b/c/d 202 0.0 1.0 2.0 3.0 4.0 5.0 6.0 time ( 1ms / div ) input voltage : vin (v) 1.8 1.9 2.0 2.1 2.2 2.3 2.4 output voltage : vout (v) i out =30ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output voltage input voltage output voltage: v out (v) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) xc6216b/d 332 1.0 2.0 3.0 4.0 5.0 6.0 7.0 time ( 1ms / div ) input voltage : vin (v) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 output voltage : vout (v) i out =1ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output voltage input voltage xc6216b/d 332 1.0 2.0 3.0 4.0 5.0 6.0 7.0 time ( 1 ms / div ) input voltage : vin (v) 3.1 3.2 3.3 3.4 3.5 3.6 3.7 output voltage : vout (v) i out =30ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output v oltage input v oltage output voltage: v out (v) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) typical performance chara cteristics (continued) (6) line transient response (5) output voltage vs. ambient temperature
29/43 xc6216/xe6216 series xc6216b/d 502 3.0 4.0 5.0 6.0 7.0 8.0 9.0 time ( 1ms /div ) input voltage : vin (v) 4.8 4.9 5.0 5.1 5.2 5.3 5.4 output voltage : vout (v) i out =1ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output voltage input voltage xc6216b/d 502 3.0 4.0 5.0 6.0 7.0 8.0 9.0 time ( 1ms /div ) input voltage : vin (v) 4.8 4.9 5.0 5.1 5.2 5.3 5.4 output voltage : vout (v) i out =30ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output voltage input voltage output voltage: v out (v) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) xc6216b/d c02 10.0 11.0 12.0 13.0 14.0 15.0 16.0 time (1ms/div) input voltage : vin (v) 11.8 11.9 12.0 12.1 12.2 12.3 12.4 output voltage : vout (v) i out =1ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output voltage input voltage xc6216b/d c02 10.0 11.0 12.0 13.0 14.0 15.0 16.0 time (1ms/div) input voltage : vin (v) 11.8 11.9 12.0 12.1 12.2 12.3 12.4 output voltage : vout (v) i out =30ma, tr=tf =5 s c l =1 f (ceramic), ta=25 output voltage input voltage output voltage: v out (v) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) typical performance chara cteristics (continued) (6) line transient response (continued) xc6216b/c/d 202 0 1 2 3 4 5 time (1ms/div) output voltage : vout (v) 0 30 60 90 120 150 output current : iout (ma) output voltage output current vin=4.0v, tr=tf=5us cin=cl=1.0uf(ceramic), ta=25 1m 30 xc6216b/d 332 0 1 2 3 4 5 time (1ms/div) output vltage : vout (v) 0 30 60 90 120 150 output current : iout (ma) vin=5.3v, tr=tf=5us cin=cl=1.0uf(ceramic), ta=25 1m 30m output voltage output current (7) load transient response
30/43 xc6216/xe6216 series xc6216b/c/d 202 -6 -4 -2 0 2 4 6 time ( 1ms/div ) input voltage : vin (v) 0 1 2 3 4 5 6 output voltage : vout (v) v in =4.0v, tr=5 s i out =1ma, c l =1 f (ceramic),ta=25 output voltage input v oltage xc6216b/c/d 202 -6 -4 -2 0 2 4 6 time ( 1ms/div ) input voltage : vin (v) 0 1 2 3 4 5 6 output voltage : vout (v) v in =4.0v, tr=5 s i out =30ma, c l =1 f (ceramic),ta=25 output voltage input v oltage output voltage: v out (v) input voltage: v in (v) output voltage: v out (v) input voltage: v in (v) (7) load transient response (continued) typical performance chara cteristics (continued) (8) input rise time xc6216b/d 502 2 3 4 5 6 7 time (1ms/div) output voltage : vout (v) 0 30 60 90 120 150 output current : iout (ma) vin=7.0v, tr=tf=5us cin=cl=1.0uf(ceramic), ta=25 1m 30m output voltage output current xc6216b/d c02 9 10 11 12 13 14 time (1ms/div) output voltage : vout (v) 0 30 60 90 120 150 output current : iout (ma) vin=14.0v, tr=tf=5us cin=cl=1.0uf(ceramic), ta=25 1m 30 output voltage output current xc6216b/d 332 -8 -6 -4 -2 0 2 4 6 8 time(1ms/div) input voltage : vin (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) vin=5.3v, tr=5us iout=1macl=1uf(ceramic),ta=25 output voltage input voltage xc6216b/d 332 -8 -6 -4 -2 0 2 4 6 8 time(1ms/div) input voltage : vin (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) vin=5.3v, tr=5us iout=30macl=1uf(ceramic),ta=25 output voltage input voltage
31/43 xc6216/xe6216 series xc6216b/c/d 202 -6 -4 -2 0 2 4 6 time (1ms /div ) ce input voltage : vce (v) 0 1 2 3 4 5 6 output voltage : vout (v) output voltage v in =4.0v, tr=5 s i out =1ma, c l =1 f (ceramic),ta=25 ce input voltage xc6216b/c/d 202 -6 -4 -2 0 2 4 6 time( 1ms /div ) ce input voltage : vce (v) 0 1 2 3 4 5 6 output voltage : vout (v) v in =4.0v, tr=5 s i out =30ma, c l =1 f (ceramic),ta=25 output voltage ce input voltage output voltage: v out (v) ce input voltage: v ce (v) output voltage: v out (v) ce input voltage: v ce (v) typical performance chara cteristics (continued) (8) input rise time (continued) (9) ce rise time xc6216b/d 502 -8 -6 -4 -2 0 2 4 6 8 time (1ms/div) input voltage : vin (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) vin=7.0v, tr=5us iout=1macl=1f(ceramic),ta=25 output voltage input voltage xc6216b/d 502 -8 -6 -4 -2 0 2 4 6 8 time (1ms/div) input voltage : vin (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) vin=7.0v, tr=5us iout=30macl=1f(ceramic),ta=25 output voltage input voltage xc6216b/d c02 -15 -10 -5 0 5 10 15 time (1ms/div) input voltage : vin (v) 0 3 6 9 12 15 18 output voltage : vout (v) vin=14.0v, tr=5us iout=1macl=1f(ceramic),ta=25 output voltage input voltage xc6216b/d c02 -15 -10 -5 0 5 10 15 time (1ms/div) input voltage : vin (v) 0 3 6 9 12 15 18 output voltage : vout (v) vin=14.0v, tr=5us iout=30macl=1f(ceramic),ta=25 output voltage input voltage
32/43 xc6216/xe6216 series xc6216b/d 332 -8 -6 -4 -2 0 2 4 6 8 time ( 1ms / div ) ce input voltage : vin (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) v in =5.3v, tr=5 s i out =1ma, c l =1 f (ceramic),ta=25 output voltage ce input voltage xc6216b/d 332 -8 -6 -4 -2 0 2 4 6 8 time ( 1ms / div ) ce input voltage : vce (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) v in =5.3v, tr=5 s i out =30ma, c l =1 f ( ceramic ) ,ta=25 output voltage ce input voltage output voltage: v out (v) ce input voltage: v ce (v) output voltage: v out (v) ce input voltage: v ce (v) xc6216b/d 502 -8 -6 -4 -2 0 2 4 6 8 time (1ms/div) ce input voltage : vce (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) v in =7.0v, tr=5 s i out =1ma, c l =1 f (ceramic),ta=25 output voltage ce input voltage xc6216b/d 502 -8 -6 -4 -2 0 2 4 6 8 time ( 1ms / div ) ce input voltage : vce (v) 0 1 2 3 4 5 6 7 8 output voltage : vout (v) v in =7.0v, tr=5 s i out =30ma, c l =1 f ( ceramic ) ,ta=25 output voltage ce input voltage output voltage: v out (v) ce input voltage: v ce (v) output voltage: v out (v) ce input voltage: v ce (v) xc6216b/d c02 -15 -10 -5 0 5 10 15 time ( 1ms / div ) ce input voltage : vce (v) 0 3 6 9 12 15 18 output voltage : vout (v) v in =14.0v, tr=5 s i out =1ma, c l =1 f (ceramic),ta=25 output voltage ce input voltage xc6216b/d c02 -15 -10 -5 0 5 10 15 time ( 1ms /div ) ce input voltage : vce (v) 0 3 6 9 12 15 18 output voltage : vout (v) v in =14.0v, tr=5 s i out =30ma, c l =1 f (ceramic),ta=25 output voltage ce input voltage output voltage: v out (v) ce input voltage: v ce (v) output voltage: v out (v) ce input voltage: v ce (v) (9) ce rise time (continued) typical performance chara cteristics (continued)
33/43 xc6216/xe6216 series xc6216b/c/d 202 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 frequency : f (khz) ripple rejection rate: psrr (db v in =4.0vdc+0.5vp-p, i out =1m a c l =1 f (ceramic),ta=25 xc6216b/c/d 202 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 frequency : f (khz) psrr (db ) v in =4.0vdc+0.5vp-p, i out =30m a c l =1 f (ceramic),ta=25 ripple rejection rate: psrr (db) ripple frequency: f (khz) ripple rejection rate: psrr (db) ripple frequency: f (khz) xc6216b/d 502 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 frequency : f (khz) psrr (db ) v in =7.0vdc+0.5vp-p, i out =1m a c l =1 f (ceramic),ta=25 xc6216b/d 502 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 frequency : f (khz) psrr (db ) v in =7.0vdc+0.5vp-p, i out =30m a c l =1 f (ceramic),ta=25 ripple frequency: f (khz) ripple rejection rate: psrr (db) ripple frequency: f (khz) ripple rejection rate: psrr (db) typical performance chara cteristics (continued) (10) ripple rejection rate xc6216b/d 332 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 ripple frequency : f (khz) ripple rejection rate : psrr (db) vin=5.3vdc+0.5vp-p, iout=1ma cl=1f(ceramic),ta=25 xc6216b/d 332 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 ripple frequency : f (khz) ripple rejection rate : psrr (db) vin=5.3vdc+0.5vp-p, iout=30ma cl=1f(ceramic),ta=25
34/43 xc6216/xe6216 series xc6216b/d c02 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 frequeency : f (khz) psrr (db ) v in =v ce =14.0vdc+0.5vp-p, i out =1m a c l =1 f (ceramic),topr=25 xc6216b/d c02 0 10 20 30 40 50 60 70 80 90 0.01 0.1 1 10 100 frequency : f (khz) psrr (db ) v in =v ce =14.0vdc+0.5vp-p, i out =30m a c l =1 f (ceramic),topr=25 ripple frequency: f (khz) ripple rejection rate: psrr (db) ripple frequency: f (khz) ripple rejection rate: psrr (db) (10) ripple rejection time (continued) typical performance chara cteristics (continued)
35/43 xc6216/xe6216 series sot-25 sot-89-5 usp-6c usp-6c reference pattern layout usp-6c reference metal mask design packaging information
36/43 xc6216/xe6216 series sot-223 to-252 packaging information (continued) sot-89 9.90.55 1.10.25 0.850.25 2.4 max 6.10.15 4.32 max
37/43 xc6216/xe6216 series sot-25 power dissipation u??gmm board mount (tj max = 125 ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 600 85 240 166.67 pd-ta? 0 100 200 300 400 500 600 700 25 45 65 85 105 125 x?ta S?p?pdmw packaging information (continued) power dissipation data for the sot-25 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of referenc e data taken in the described condition. 1. measurement condition (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces (board of sot-26 is used.) material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter evaluation board (unit: mm) 2. power dissipation vs. ambient temperature pd vs. ta ambient temperature ta ( ) power dissi p ation pd ( mw )
38/43 xc6216/xe6216 series sot-89-5 power dissipation ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 1300 85 520 76.92 pd-ta? 0 200 400 600 800 1000 1200 1400 25 45 65 85 105 125 x?ta S?p?pdmw power dissipation data for the sot-89-5 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of referenc e data taken in the described condition. 1. measurement condition (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 5 x 0.8 diameter evaluation board (unit: mm) 2. power dissipation vs. ambient temperature pd vs. ta ambient temperature ta ( ) power dissipation pd (mw) packaging information (continued)
39/43 xc6216/xe6216 series usp-6c power dissipation ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 1000 85 400 100.00 pd-ta? 0 200 400 600 800 1000 1200 25 45 65 85 105 125 x?ta S?p?pdmw power dissipation data for the usp-6c is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of referenc e data taken in the described condition. 1. measurement condition (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter evaluation board (unit: mm) 2. power dissipation vs. ambient temperature pd vs. ta ambient temperature ta ( ) power dissipation pd (mw) packaging information (continued)
40/43 xc6216/xe6216 series sot-223 power dissipation board mount (tj max = 125 ) ambient temperature power dissipation pd mw thermal resistance ( /w) 25 1500 85 600 66.67 pd-ta? 0 200 400 600 800 1000 1200 1400 1600 25 45 65 85 105 125 x?ta S?p?pdmw power dissipation data for the sot-223 is shown in this page. the value of power dissipation varies with the mount board conditions. please use this data as one of referenc e data taken in the described condition. 1. measurement condition (reference data) condition: mount on a board ambient: natural convection soldering: lead (pb) free board: dimensions 40 x 40 mm (1600 mm 2 in one side) copper (cu) traces occupy 50% of the board area in top and back faces package heat-sink is tied to the copper traces material: glass epoxy (fr-4) thickness: 1.6 mm through-hole: 4 x 0.8 diameter evaluation board (unit: mm) 2. power dissipation vs. ambient temperature pd vs. ta ambient temperature ta ( ) power dissipation pd (mw) packaging information (continued)
41/43 xc6216/xe6216 series mark product series 2 xc6216xxxxxx mark voltage (v) product series 0 2.0~3.0 1 3.1~6.0 2 6.1~9.0 3 9.1~12.0 xc6216bxxxxx 4 2.0~3.0 5 3.1~6.0 6 6.1~9.0 7 9.1~12.0 xc6216dxxxxx 8 2.0 xc6216cxxxxx mark voltage(v) mark voltage(v) 0 - 3.1 6.1 9.1 f - 4.6 7.6 10.6 1 - 3.2 6.2 9.2 h - 4.7 7.7 10.7 2 - 3.3 6.3 9.3 k - 4.8 7.8 10.8 3 - 3.4 6.4 9.4 l - 4.9 7.9 10.9 4 - 3.5 6.5 9.5 m 2.0 5.0 8.0 11.0 5 - 3.6 6.6 9.6 n 2.1 5.1 8.1 11.1 6 - 3.7 6.7 9.7 p 2.2 5.2 8.2 11.2 7 - 3.8 6.8 9.8 r 2.3 5.3 8.3 11.3 8 - 3.9 6.9 9.9 s 2.4 5.4 8.4 11.4 9 - 4.0 7.0 10.0 t 2.5 5.5 8.5 11.5 a - 4.1 7.1 10.1 u 2.6 5.6 8.6 11.6 b - 4.2 7.2 10.2 v 2.7 5.7 8.7 11.7 c - 4.3 7.3 10.3 x 2.8 5.8 8.8 11.8 d - 4.4 7.4 10.4 y 2.9 5.9 8.9 11.9 e - 4.5 7.5 10.5 z 3.0 6.0 9.0 12.0 marking rule (xc6216 series) sot-25, sot-89,sot-89-5,usp-6c,sot-223,to-252 represents the product number represents the voltage range represents the output voltage ? represents assembly lot number 01, ??? ,09, 10,11, ??? ,99,0a, ??? ,0z,1a, ??? repeated (g, i, j, o, q, w excluded) note: no character inversion used. so t -25 usp-6c so t -89 so t -89-5 so t -223 to-252
42/43 xc6216/xe6216 series bar marking of a-b-c-d combination represents production year. bar marking of e-f-g-h combination represents productio n month. mark product series 2 xe6216xxxxxx mark voltage (v) product series 0 2.0~3.0 1 3.1~6.0 2 6.1~9.0 3 9.1~12.0 xe6216bxxxxx mark voltage(v) mark voltage(v) 0 - 3.1 6.1 9.1 f - 4.6 7.6 10.6 1 - 3.2 6.2 9.2 h - 4.7 7.7 10.7 2 - 3.3 6.3 9.3 k - 4.8 7.8 10.8 3 - 3.4 6.4 9.4 l - 4.9 7.9 10.9 4 - 3.5 6.5 9.5 m 2.0 5.0 8.0 11.0 5 - 3.6 6.6 9.6 n 2.1 5.1 8.1 11.1 6 - 3.7 6.7 9.7 p 2.2 5.2 8.2 11.2 7 - 3.8 6.8 9.8 r 2.3 5.3 8.3 11.3 8 - 3.9 6.9 9.9 s 2.4 5.4 8.4 11.4 9 - 4.0 7.0 10.0 t 2.5 5.5 8.5 11.5 a - 4.1 7.1 10.1 u 2.6 5.6 8.6 11.6 b - 4.2 7.2 10.2 v 2.7 5.7 8.7 11.7 c - 4.3 7.3 10.3 x 2.8 5.8 8.8 11.8 d - 4.4 7.4 10.4 y 2.9 5.9 8.9 11.9 e - 4.5 7.5 10.5 z 3.0 6.0 9.0 12.0 production year a b c d xxx0 - - - xxx1 - - - xxx2 - - - xxx3 - - - xxx4 - - xxx5 - - xxx6 - - xxx7 - - xxx8 - - xxx9 - - marking rule (xe6216 series) sot-89-5 represents the product number represents the voltage range represents the output voltage represents assembly lot number 0, ??? ,9, a,b, ??? ,z,0, ??? ,9,a,b, ??? ,z,0, ??? repeated (g, i, j, o, q, w excluded) production month e f g h january - - - february - - - march - - - april - - - may - - june - - july - - august - - september - - october - - november - december - sot-89-5
43/43 xc6216/xe6216 series 1. the products and product specifications cont ained herein are subject to change without notice to improve performance characteristic s. consult us, or our representatives before use, to confirm that the informat ion in this datasheet is up to date. 2. we assume no responsibility for any infri ngement of patents, pat ent rights, or other rights arising from the use of any information and circuitry in this datasheet. 3. please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this datasheet. 4. the products in this datasheet are not devel oped, designed, or approved for use with such equipment whose failure of malfuncti on can be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. atomic energy; aerospace; transpor t; combustion and associated safety equipment thereof.) 5. please use the products listed in this datasheet within the specified ranges. should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. we assume no responsibility for damage or loss due to abnormal use. 7. all rights reserved. no part of this dat asheet may be copied or reproduced without the prior permission of torex semiconductor ltd.

▲Up To Search▲

Price & Availability of XC6216B941PR-G

	To Download XC6216B941PR-G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .