super capacitors vol.05 19 fg series the fg series includes small-size electric double-layer capacitors with excellent voltage holding characteristics. the fg series are ideal as long-time backup devices for minute-current loads in small and lightweight systems. features ? the volume of the products is approx. 1/2 that of the fyd type products. (0.22f~2.2f) ? added 4.7f/5.5v to series. ? miniaturized 0.047f/5.5v and 0.10f/5.5v applications ? backup of cmos microprocessors, static rams, dtss (digital tuning systems) ? memory backup of remote controllers and handy cassette player during battery exchange part number system fg 0h 473 z capacitance tolerance: z: +80%, ?0% capacitance: 0.047 f first two digits represent significant figures. third digit specifies number of zeros to follow f code. maximum rated voltage 0h: 5.5 vdc super capacitor: fg series
20 super capacitors vol.05 max. current at 30 minutes (ma) 0.015 0.033 0.071 0.15 0.33 0.71 1.5 3.3 7.1 markings markings are made with black ink on the green sleeve. dimensions and standard ratings p 0.5 0.3 min. h max. d 1 0.1 d 2 0.1 d 0.5 l min. sleeve lead (case) negative polarity lead part number fg0h103z fg0h223z fg0h473z fg0h104z FG0H224Z fg0h474z fg0h105z fg0h225z fg0h475z max. rated voltage (v) 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 5.5 charge system (f) 0.01 0.022 0.047 0.10 0.22 0.47 1.0 2.2 4.7 max. esr (at 1 khz) ( ? ) 300 200 200 100 100 120 65 35 35 note: weight is typical. part no. fg0h103z fg0h223z fg0h473z fg0h104z FG0H224Z fg0h474z fg0h105z fg0h225z fg0h475z d 1 1.0 (0.43) 1 1.0 (0.43) 1 1.0 (0.43) 1 1.0 (0.43) 13.0 (0.512) 14.5 (0.571) 16.5 (0.65) 21.5 (0.85) 28.5 (1.122) h 5.5 (0.215) 5.5 (0.215) 5.5 (0.215) 6.5 (0.256) 9.0 (0.355) 18.0 (0.709) 19.0 (0.749) 19.0 (0.749) 22.0 (0.867) p 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 5.08 (0.200) 7.62 (0.300) 10.16 (0.400) d 1 0.2 (0.016) 0.2 (0.016) 0.2 (0.016) 0.2 (0.016) 0.4 (0.016) 0.4 (0.016) 0.4 (0.016) 0.6 (0.024) 0.6 (0.024) d 2 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.2 (0.047) 1.4 (0.055) dimensions mm (inch) sleeve lead terminal connected to the metal can case negative polarity negative polarity identification mark date code marking of sleeve k1 5.5v k1 001 fg 0.22f 5.5v fg 0.22f super capacitor super capacitor w eight g (oz) 0.9 (0.032) 1.0 (0.035) 1.0 (0.035) 1.3 (0.046) 2.5 (0.088) 5.1 (0.180) 7.0 (0.247) 12.1 (0.427) 27.3 (0.964) l 2.7 (0.106) 2.7 (0.106) 2.7 (0.106) 2.7 (0.106) 2.2 (0.087) 2.4 (0.095) 2.7 (0.106) 3.0 (0.118) 6.1 (0.240) v oltage holding characteristic min.(v) 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 discharge system (f) 0.013 0.028 0.060 0.13 0.28 0.60 1.3 2.8 6.0 nominal capacitance
super capacitors vol.05 21 standard ?5?c to +70?c 5.5 vdc 0.010 to 4.7 f +80 %, ?0 % see standard list see standard list capacitance more than 90% of initial requirement equivalent series resistance not to exceed 120% of initial requirement current at 30 min. not to exceed 120% of initial requirement appearance no obvious abnormality capacitance 50% or higher of initial value equivalent series resistance 4 or less times initial value capacitance 200% or below of initial value equivalent series resistance satisfy initial standard value current at 30 min. 1.5 cv (ma) or below capacitance within 20% of initial value equivalent series resistance satisfy initial standard value current at 30 min. satisfy initial standard value no loosening nor permanent damage of the leads capacitance equivalent series resistance meet initial standard value current at 30 min. appearance no obvious abnormality 3 / 4 or more of the pin surface should be covered with new solder capacitance equivalent series resistance should satisfy initial standard value current at 30 min. appearance no obvious abnormality capacitance equivalent series resistance satisfy initial standard value current at 30 min. appearance no obvious abnormality capacitance within 20% of initial value equivalent series resistance 1.2 or less times initial standard value current at 30 min. 1.2 or less times initial standard value appearance no obvious abnormality capacitance within 30% of initial value equivalent series resistance t wice or less times initial standard value current at 30 min. t wice or less times initial standard value appearance no obvious abnormality vo ltage between terminal leads higher than 4.2v items operating temperature range maximum operating voltage. nominal capacitance range capacitance allowance equivalent series resistance current (30-minute value) surge voltage phase 2 phase 5 phase 6 lead strength (tensile) v ibration resistance solderability soldering heat resistance t emperature cycle humidity resistance high temperature load vo ltage holding characteristics (self discharge) t est conditions conforming to jis c 5102 -1994 see characteristics measuring method see characteristics measuring method see characteristics measuring method see characteristics measuring method conforms to 7.14 surge voltage: 6.3v t emperature: 70 2?c charge: 30 sec. discharge: 9 min 30 sec. number of cycles: 1000 cycles series resistance: 0.010f: 1500 ? 0.47f: 30 ? 0.022f: 560 ? 1.0f: 15 ? 0.047f: 300 ? 2.2f: 10 ? 0.10f: 150 ? 4.7f: 10 ? 0.22f: 56 ? discharge resistance: 0 ? conforms to 7.12 phase 1: +25 2?c phase 2: ?5 2?c phase 3: ?0 2?c phase 4: +25 2?c phase 5: +70 2?c phase 6: +25 2?c conforms to 8.1.2 (1) conforms to 8.2.3 (1) frequency: 10 to 55 hz t est duration: 6 hours conforms to 8.4 solder temperature: 230 5?c dipping duration: 5 0.5 sec. should be dipped up to 1.6mm from the lower end of the capacitor conforms to 8.5 solder temperature: 260 10?c dipping duration: 10 1 sec. should be dipped up to 1.6mm from the lower end of the capacitor conforms to 9.3 t emperature: ?5?c normal temperature +70?c normal temperature number of cycles: 5 cycles conforms to 9.5 t emperature: 40 2?c relative humidity: 90 to 95% rh t est duration: 240 8hours conforms to 9.10 t emperature: 70 2?c v oltage applied: 5.5vdc series protection resistance: 0 ? t est duration: 1000 hours v oltage applied: 5.0vdc (with case side terminal negative) series resistance: 0 ? charging time: 24 hours t ime: 24 hours t emperature: lower than 25 ?c humidity: lower than 70%rh specifications t emperature v ariation of characteristics charging condition storage +48 -0
22 super capacitors vol.05 dimensions and standard ratings p 0.5 0.3 min. h max. d 1 0.1 d 2 0.1 d 0.5 l min. sleeve lead (case) negative polarity lead note: weight is typical. fgh type part no. fgh0h104z fgh0h224z fgh0h474z fgh0h105z d 1 1.0 1 1.0 16.5 21.5 h 5.5 7.0 8.0 9.5 p 5.08 5.08 5.08 7.62 d 1 0.2 0.2 0.4 0.6 d 2 1.2 1.2 1.2 1.2 dimensions mm w eight g 1.0 1.3 4.1 7.2 l 2.7 2.7 2.7 3.0 max. current at 30 minutes (ma) 0.15 0.33 0.71 1.5 part number fgh0h104z fgh0h224z fgh0h474z fgh0h105z max. rated voltage (v) 5.5 5.5 5.5 5.5 charge system (f) - - - - max. esr (at 1 khz) ( ? ) 100 100 65 35 v oltage holding characteristic min.(v) 4.2 4.2 4.2 4.2 discharge system (f) 0.10 0.22 0.47 1.0 nominal capacitance
super capacitors vol.05 23 standard ?5?c to +70?c 5.5 vdc 0.10 to 1.0 f +80 %, ?0 % see standard list see standard list capacitance more than 90% of initial requirement equivalent series resistance not to exceed 120% of inital requirement current at 30 min. not to exceed 120% of inital requirement appearance no obvious abnormality capacitance 50% or higher of initial value equivalent series resistance 4 or less times initial value capacitance 200% or below of initial value equivalent series resistance satisfy initial standard value current at 30 min. 1.5 cv (ma) or below capacitance within 20% of initial value equivalent series resistance satisfy initial standard value current at 30 min. satisfy initial standard value no loosening nor permanent damage of the leads capacitance equivalent series resistance meet initial standard value current at 30 min. appearance no obvious abnormality 3 / 4 or more of the pin surface should be covered with new solder capacitance equivalent series resistance should satisfy initial standard value current at 30 min. appearance no obvious abnormality capacitance equivalent series resistance satisfy initial standard value current at 30 min. appearance no obvious abnormality capacitance within 20% of initial value equivalent series resistance 1.2 or less times initial standard value current at 30 min. 1.2 or less times initial standard value appearance no obvious abnormality capacitance within 30% of initial value equivalent series resistance t wice or less times initial standard value current at 30 min. t wice or less times initial standard value appearance no obvious abnormality vo ltage between terminal leads higher than 4.2v items operating temperature range maximum operating voltage. nominal capacitance range capacitance allowance equivalent series resistance current (30-minute value) surge voltage phase 2 phase 5 phase 6 lead strength (tensile) v ibration resistance solderability solder heat resistance t emperature cycle humidity resistance high temperature load vo ltage holding characteristics (self discharge) t est conditions conforming to jis c 5102 -1994 see characteristics measuring method see characteristics measuring method see characteristics measuring method see characteristics measuring method conforms to 7.14 surge voltage: 6.3v t emperature: 70 2?c charge: 30 sec. discharge: 9 min 30 sec. number of cycles: 1000 cycles series resistance: 0.10f: 150 ? 0.22f: 56 ? 0.47f: 30 ? 1.0f: 15 ? discharge resistance: 0 ? conforms to 7.12 phase 1: +25 2?c phase 2: ?5 2?c phase 3: ?0 2?c phase 4: +25 2?c phase 5: +70 2?c phase 6: +25 2?c conforms to 8.1.2 (1) conforms to 8.2.3 frequency: 10 to 55 hz t est duration: 6 hours conforms to 8.4 solder temperature: 230 5?c dipping duration: 5 0.5 sec. should be dipped up to 1.6mm from the lower end of the capacitor conforms to 8.5 solder temperature: 260 10?c dipping duration: 10 1 sec. should be dipped up to 1.6mm from the lower end of the capacitor conforms to 9.3 t emperature: ?5?c normal temperature +70?c normal temperature number of cycles: 5 cycles conforms to 9.5 t emperature: 40 2?c relative humidity: 90 to 95% rh t est duration: 240 8hours conforms to 9.10 t emperature: 70 2?c v oltage applied: 5.5vdc series protection resistance: 0 ? t est duration: 1000 hours v oltage applied: 5.0vdc (with case side terminal negative) series resistance: 0 ? charging time: 24 hours t ime: 24 hours t emperature: lower than 25 ?c humidity: lower than 70%rh specifications fgh t ype t emperature v ariation of characteristics charging condition storage +48 -0
|
