View PD057VU5_4033342.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

p d 0 5 7 v u 5 t h e i n f o r m a t i o n c o n t a i n e d h e r e i n i s t h e e x c l u s i v e p r o p e r t y o f p r i m e v i e w i n t e r n a t i o n a l c o . , l t d . a n d s h a l l n o t b e d i s t r i b u t e d , r e p r o d u c e d , o r d i s c l o s e d i n w h o l e o r i n p a r t w i t h o u t p r i o r w r i t t e n p e r m i s s i o n o f p r i m e v i e w i n t e r n a t i o n a l c o . , l t d . p a g e : 1 v e r s i o n : 4 . 0 t e c h n i c a l s p e c i f i c a t i o n m o d e l n o . : p d 0 5 7 v u 5 t h e c o n t e n t o f t h i s i n f o r m a t i o n i s s u b j e c t t o b e c h a n g e d w i t h o u t n o t i c e . p l e a s e c o n t a c t p v i o r i t s a g e n t f o r f u r t h e r i n f o r m a t i o n . c u s t o m e r ? s c o n f i r m a t i o n c u s t o m e r d a t e b y p v i ? s c o n f i r m a t i o n c o n f i r m e d b y p r e p a r e d b y p-511-407(v:4) for more informa tion: az displa ys, inc. 75 columbia, aliso viejo, ca 92656 http://www .azdispla ys.com
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:2 revision history r ev. issued date revised contents 1.0 mar.12, 2007 new 2.0 mar. 24, 2008 delete page 16 13.handling cautions 13-1 item b) add page 16 13.handling cautions 13-1 item d) 3.0 jun. 10, 2008 modify page 5 packing drawing---add ul label 4 .0 may 19, 2009 delete backlight connector pin pitch before ? connector type ? jst bhr-03vs-1, pin no 2 pins, pitch=3.5mm after ? connector type ? jst bhr-03vs-1, pin no 3 pins p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:3 technical specification contents no. ite m pa g e - cover 1 - revision history 2 - contents 3 1 application 4 2 features 4 3 mechanical specifications 4 4 mechanical drawing of tft-lcd module 5 5 input / output terminals 6 6 absolute maximum ratings 7 7 electrical characteristics 7 8 pixel arrangement 8 9 display color and g ray scale reference 9 10 interface timing 10 11 power on sequence 13 12 optical characteristics 13 13 handling cautions 16 1 4 reliability test 18 15 packing diagram 19 p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page: 4 1. application this data sheet applies to a color tft lcd module, PD057VU5. PD057VU5 module applies to oa product, car tv (mu st use analog to digital driving board), which requires high quality flat panel display. if you must use in severe reliability environment, please dont extend over pvis reliability test conditions. 2. features . qv g a (320*2 4 0 pixels) resolution . amorphous silicon tft lcd panel with led . pixel in stripe configuration . thin and light weight . display colors ? 262,1 44 colors . ttl interface 3. m echanical specifications parameter specifications unit screen size 5.7 (diagonal) inch display format 320 j (r, g ,b) j 2 4 0 dot display colors 262,1 44 active area 115.20 (h) j 86. 4 (v) mm pixel pitch 0.36(h) j 0.36(v) mm pixel configuration stripe outline dimension 1 44 (w) ? 10 4 .6 (h) ? 13.0 (d) (typ.) mm weight 206 2 10 g back-light led surface treatment anti-glare + swv display mode normally white g ray scale inversion direction 6 o`clock [ref. to note 12-1] p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:5 4 . m echanical drawing of tft-lcd m odule outline drawing : front view (unit : mm) e307 4 59 p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:6 5.input / output terminals 5-1) tft-lcd panel driving connector type: elco 08-6210-033-3 4 0-800a+, pin no 33 pins pin no symbol i/o description remark 1 g nd - g nd 2 ck i clock signal for sampling each data signal 3 hsync i horizontal synchronous signal(neqative) 4 vsync i vertical synchronous signal(neqative) 5 g nd - g nd 6 r0 red data signal(lsb) 7 r1 i red data signal 8 r2 i red data signal 9 r3 i red data signal 10 r 4 i red data signal 11 r5 i red data signal(msb) 12 g nd - g nd 13 g 0 i g reen data signal(lsb) 1 4 g 1 i g reen data signal 15 g 2 i g reen data signal 16 g 3 i g reen data signal 17 g4 i g reen data signal 18 g 5 i g reen data signal(msb) 19 g nd - g nd 20 b0 i blue data signal(lsb) 21 b1 i blue data signal 22 b2 i blue data signal 23 b3 i blue data signal 2 4 b 4 i blue data signal 25 b5 i blue data signal(msb) 26 g nd - g nd 27 enab i signal to settle the horizontal display position(positive) note5-1 28 v cc - +3.3v power supply 29 v cc - +3.3v power supply 30 r/l i horizontal display mode select signal l ? normal ,h ? left /right reverse mode note5-2 31 u/d i vertical display mode select signal h ? normal ,l :up/down reverse mode note5-3 32 v/q i v g a / qv g a mode select signal note10-2 33 g nd - g nd note5-1 ? the horizontal display start timing is settled in accordance with rising of enab signal. in case enab is fixed low,the horizontal start timing is determined as described in 10-2. don`t keep enabh igh during operation. p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:7 note 5-2 , 5-3 : the definitions of u/d & r/l r/l(pin 30)= low, u/d(pin 31)= high r/l(pin 30)= high , u/d(pin 31)= low 5-2) led backlight driving connector type: jst bhr-03vs-1, pin no 3 pins pin no symbol description remark 1 + input terminal (anode) red 2 nc no connect - 3 - input terminal (cathode) black 6.absolute m aximum ratings: g nd=0v, ta=25 : parameters symbol condition m a x . unit remark input voltage v i ta=25 : -0.3~+ 4 v note6-1 +3.3v supply voltage v cc ta= 25 : 0~+3.6 v note6-1:ck,r0~r5, g 0~ g 5,b0~b5,hsync,vsync,enab,r/l,u/d,v/q 7.electrical characteristics 7-1) recommended operating conditions: g nd=0v, ta=25 : item symbol m in. typ. m ax. unit remark +3.3v supply voltage v cc +3.0 +3.3 +3.6 v permissive input ripple voltage v rf - - 100 mvp-p v cc =3.3v input voltage(low) v il 0 - 0.3 v cc v input voltage(high) v ih 0.7 v cc - v cc v p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:8 7-2) recommended driving condition for led back light ta=25 : parameter s ymbol min. ty p . ma x . u nit r emar k led voltage v led - - (11) v note 7-1 led current i led - 20 - ma note 7-2 bac k light power consum p tion p led - - 2640 mw note 7-1 note 7-3 note 7-1 ? the i led = 20 ma (constant current) note 7-2 ? the led driving condition is defined for each led module. (3 led serial) the input current= 20 ma*12=2 4 0 ma. note 7-3 ? p led = v led-1 * i led-1 + v led-2 * i led-2 .. + v led-11 * i led-11 +v led-12 * i led-12 vled -1 vled -11 vled -2 vled -12 anode cathode 7-3) power consumption parameters symbol typ. m ax. unit remark +3.3v current dissipation i cc 67 100 ma lcd panel power consumption - 0.22 0.33 w note 7- 4 total power consumption - - 2.97 w note 7- 4 ? the power consumption for back light is not included. 8. pixel arrangement the lcd module pixel arrangement is stripe configuration. p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:9 9. display color and g ray scale reference input color data color red g reen blue r5 r 4 r3 r2 r1 r0 g 5 g4 g 3 g 2 g 1 g 0 b5 b 4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 g reen (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 basic blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 colors cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (02) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 darker red ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? brighter red (61) 1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 red (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 red (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 g reen (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 g reen (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 g reen (02) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 darker g reen ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? brighter g reen (61) 0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0 g reen (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0 g reen (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0 blue (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 blue (02) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 darker blue ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? brighter blue (61) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1 blue (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0 blue (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:10 10. interface timing 10-1) timing parameters ac electrical characteristics (v cc =+3.3v, g nd=0v,ta=25 : ) characteristics symbol min. typ. max. unit remark - 25.18 28.33 mhz v/q=h frequency 1/tc - 6.3 7.0 mhz v/q=l clock duty ratio tch/tc 4 0 50 60 % v/q=l set up time tds 5 - - data hold time tdh 10 - - ns 30.0 31.8 - us th 700 800 900 clock v/q=h 50.0 63.6 - us cycle th 360 4 00 4 50 clock v/q=l horizontal sync. signal pulse width thp 2 96 200 clock tv 515 525 560 v/q=h cycle tv 251 262 280 line v/q=l vertical sync. signal pulse width tvp 2 - 3 4 line horizontal display period thd 320 clock hsync.-clock phase difference thc 10 - tc-10 ns hsync.-vsync. phase difference tvh 0 - th-thp ns 3 4 v/q=h vertical sync. signal start position tvs 7 line v/q=l note10-1 ? in case of lower frequency, the deterioration of the display quality, flicker etc., may occur. parameter symbol min. typ max unit remark set up time tes 5 - tc-10 ns enable signal pulse width tep 2 320 th-10 clock 44 - th-66 4 v/q=h hsync-enable signal phase difference the 2 - th-3 4 0 clock v/q=l note10-2 ? when enab is fixed at v/q=low, the display starts from the data of c52 (clock). when enab is fixed at v/q=high, the display starts from the data of c10 4 (clock). p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:11 10-2) timing diagram d2 c1 th p horizontal sync. signal ( hs y nc ) clock signal (ck) data signal (r0~r5, g 0~ g 5, b0~b5 ) data enable signal ( enab ) 0.7vdd 0.7vdd 0.3vdd thc 0.3vdd 0.3vdd 0.3vdd 0.3vdd 0.3vdd 0.3vdd 0.7vdd cn *1 tds tdh horizontal invalid data period d1 d320 number of h-data 0.3vdd 0.7vdd thd te p the tes tcl tch tc 0.7vdd 0.7vdd horizontal invalid data period th 0.3vdd *1 when enab is fi x ed at v/q=h, the dis p lay starts from the data of c104 (cloc k ). when enab is fi x ed at v/q=l, the dis p lay starts from the data of c52 (cloc k ). p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:12 tv 0.3vdd vertical sync. s ignal(vsync) data signal( r 0~ r 5,g0~g5, b0~b5) verticla invalid data p eriod 0.7vdd tv p 0. 3vdd tvh 0.7vdd horizontal sync. s ignal(hsync) 1line 2line nline dh1 dh2 dh240 verticla invalid data p eriod tvs tvd *2 the vertical dis p lay p osition (tvs) is fi x ed at 34th line (v/q=h) and 7th line (v/q=l). *2 p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:13 11. power on sequence vdd 3.0v 0.3v 3.0v t1 t2 t3 s ignal*3 1. 0 t1 20ms 2. 0 t2 50ms 3. 0 t3 1s 12. optical characteristics 12-1) specification: ta=25 : parameter symbol condition m in. typ. m a x . unit remarks horizontal e 55 60 - deg note 12-1 e (to 6 oclock) 4 5 50 - deg viewing angle vertical e (to 12 oclock) cr
10 35 4 0 - deg contrast ratio cr at optimized viewing angle 300 600 - - note 12-2 rise tr - 15 30 ms response time fall tf e =0 c - 25 50 ms note 12-3 brightness - e =0 / y =0 600 700 - cd/ d note 12-5 luminance uniformity u% 80 85 - % note 12-6 x 0.28 0.31 0.3 4 - white chromaticity y 0.31 0.3 4 0.37 - led life time - 20000 - - hrs note 12- 4 10ms 10ms bac k light on off off p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:1 4 note 12-1: the definitions of viewing angles are as follow note 12-2: the definition of contrast ratio pattern blac k at luminance pattern at white luminance c r = note 12-3: definition of response time t r and t f 100% 90% 10% 0% white white brightness black tr tf note 12- 4 ? the led life time is defined as the m odule brightness decrease to 50% original brightness that the ambi ent temperature is 25 : and i led = 2 4 0ma. led p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:15 note 12-5 ? all optical measurements s hall be performed after backlight being turned-on for 30 mins. the optical characteristics shall be measured in dark room (ambient illumination on panel surface less than 1 lux). the measuring configuration shows as following figure. note 12-6 ? the uniformity of lcd is defined as the minimum brightness of the 9 testing points u = the maximum brightness of the 9 testing points luminance meter: bm-5a or bm-7 fast (topcon) measurement distance: 500 mm +/- 50 mm ambient illumination: < 1 lux measuring direction: perpendicu lar to the surface of module the test pattern is white. 1/6 1/6 2/6 2/6 1/6 1/6 2/6 2/6 photometer (topcon bm-5a or bm-7 fast) 500 mm +/- 50 mm tft-lcd module o p tical characteristics measuring configuration field = 1 p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:16 13. handling cautions 13-1) m ounting of module a)please power off the module when you connect the input/output connector. b)polarizer which is made of soft material and susceptible to flaw must be handled carefully. c)protective film ( laminator) is applied on surface to protect it against scratches and dirt. d)please following the tear off direction as fi gure13-1 to remove the protective film as slowly as possible, so that elec trostatic charge can be minimized. 13-2) precautions in mounting a) when metal part of the tft-lcd module (s hielding lid and rear case) is soiled, wipe it with soft dry cloth. b) wipe off water drops or finger grease immediately. long contact with water may cause discoloration or spots. c) tft-lcd module uses glass which break s or cracks easily if dropped or bumped on hard surface. please handle with care. d) since cmos lsi is used in the module. so take care of static electricity and earth yourself when handling. 13-3) adjusting module a) adjusting volumes on the rear face of the module have been set optimally before shipment. b) therefore, do not change any adjusted va lues. if adjusted values are changed, the specifications described may not be satisfied. 13- 4 ) others a) do not expose the module to direct sunlight or intensive ultraviolet rays for many hours. b) store the module at a room temperature place. c) the voltage of beginning electric disc harge may over the normal voltage because of leakage current from approach conductor by to draw lump read lead line around. d) if lcd panel breaks, it is possibly that the liquid crystal escapes from the panel. avoid putting it into eyes or mouth. when liquid crystal sticks on hands, clothes or feet. wash it out immediately with soap. e) observe all other precautionary requ irements in handling general electronic components. f) please adjust the voltage of common electr ode as material of attachment by 1 module. 13-5) polarizer mark the polarizer mark is to describe the direction of wide view angle film how to match up with the rubbing direction. p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:17 figure 13-1 the way to peel off protective film p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:18 1 4 . reliability test no test item test condition remark 1 high temperature storage test ta = +85 : , 2 4 0 hrs 2 low temperature storage test ta = - 4 0 : , 2 4 0 hrs 3 high temperature operation test ta = +80 : , 2 4 0 hrs 4 low temperature operation test ta = -30 : , 2 4 0 hrs 5 high temperature & high humidity operation test ta = +60 : , 90%rh, 2 4 0 hrs (no condensation) 6 thermal cycling test (non-operating) -20 : +70 : , 200 cycles 30 min 30 min 7 vibration test (non-operating) frequency: 10 ~ 57 hz /vibration width:0.075 mm 58-500 hz / gravity: 9.8m/s2 s wee p time: 11 minutes test p eriod: 3 hrs for each direction of x, y, z 8 shock test (non-operating) gravity: 490m/s2 * 6ms direction: d x, d y, d z 3 times for each direction 9 electrostatic discharge test (non-operating) machine mode = d 200v c = 200 p f , r = 0 1 times discharge for each p ad ta: ambient temperature note: the protective film must be removed before temperature test [criteria] in the standard conditions, there is not display function n g issue occurred. (including ? line defect, no image) all the cosmetic specification is judged before the reliability stress. p-511-407(v:4)
PD057VU5 the information contained herein is the exclusive property of prime view international co., ltd. and shall not be d istributed, reproduced, or disclosed in w hole or in part without prior written per mission of prime view international co., ltd. page:19 15. packing diagram p-511-407(v:4)

▲Up To Search▲

Price & Availability of PD057VU5

	To Download PD057VU5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .