published date : aug 25,2008 drawing no :xdsa9587 v4 checked : b.l.li u p.1/5 part number: XZNWA53F-1 1.6x0.8mm smd chip led lamp notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.1(0.004") unless otherwise noted. 3.specifications are subject to change without notice. features z 1.6mmx0.8mm smt led, 0.75mm thickness. z low power consumption. z wide viewing angle. z ideal for backlight and indicator. z various colors and lens types available. z package: 2000pcs / reel . z moisture sensitivit y level : level 3. z rohs compliant. part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd viewing angle 2 1/2 min. typ. XZNWA53F-1 white ingan yellow fluorescent 70 138 120 attention observe precautions for handling electrostatic discharge sensitive devices absolute maximum ratings (t a =25c ) nwa (ingan) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 100 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 1000 v electrostatic discharge threshold (hbm) operating characteristics (t a =25c ) nwa (ingan) unit forward voltage (typ.) (i f =20ma) v f 3.2 v forward voltage (max.) (i f =20ma) v f 4.0 v reverse current (max.) (v r =5v) i r 10 ua chromaticity coordinates (typ.) x 0.31 y 0.31 capacitance (typ.) (v f =0v, f=1mhz) c 100 pf preliminary spec
published date : aug 25,2008 drawing no :xdsa9587 v4 checked : b.l.li u p.2/5 part number: XZNWA53F-1 1.6x0.8mm smd chip led lamp ? nwa
published date : aug 25,2008 drawing no :xdsa9587 v4 checked : b.l.li u p.3/5 part number: XZNWA53F-1 1.6x0.8mm smd chip led lamp XZNWA53F-1 0.20 0.25 0.30 0.35 0.40 0.20 0.25 0.30 0.35 0.40 x y a2 a0 b1 b2 c0 rank a2 rank a0 x 0.263 0.282 0.265 0.242 x 0.282 0.298 0.286 0.265 y 0.213 0.245 0.265 0.226 y 0.245 0.271 0.299 0.265 rank b2 rank b1 x 0.298 0.313 0.306 0.286 x 0.313 0.329 0.329 0.306 y 0.271 0.296 0.332 0.299 y 0.296 0.325 0.371 0.332 rank c0 x 0.329 0.358 0.363 0.329 y 0.325 0.372 0.400 0.371 white cie
published date : aug 25,2008 drawing no :xdsa9587 v4 checked : b.l.li u p.4/5 part number: XZNWA53F-1 1.6x0.8mm smd chip led lamp ? recommended soldering pattern (units : mm;tolerance: 0.1) ? tape specification (units : mm) ? the device has a single mounting surface. the device must be mounted according to the specifications . remarks: if special sorting is required (e.g. binning based on forward vo ltage, luminous intensity / luminous flux, or chromaticity), the typical accuracy of the so rting process is as follows: 1. measurement tolerance of the chromaticity coordinates is 0.01. 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : aug 25,2008 drawing no :xdsa9587 v4 checked : b.l.li u p.5/5 part number: XZNWA53F-1 1.6x0.8mm smd chip led lamp packing & label specifications XZNWA53F-1
|
